検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

FBR用低密度MOX燃料ペレットの製造条件確認試験

Confirmation tests for fabrication of low density MOX pellet for FBR

村上 龍敏 ; 鈴木 紀一  ; 畑中 延浩; 塙 幸雄; 篠崎 雄; 村上 真一; 飛田 良正; 川崎 猛; 小林 良仁; 飯村 直人; 大代 操; 助川 宣夫; 青野 茂典; 伊藤 正徳

Murakami, Tatsutoshi; Suzuki, Kiichi; Hatanaka, Nobuhiro; Hanawa, Yukio; Shinozaki, Masaru; Murakami, Shinichi; Tobita, Yoshimasa; Kawasaki, Takeshi; Kobayashi, Yoshihito; Iimura, Naoto; Daidai, Misao; Sukegawa, Nobuo; Aono, Shigenori; Ito, Masanori

「もんじゅ」用低密度MOX燃料ペレットについては、平成7年度に実施した「もんじゅ」一次取替燃料の製造以降、約9年間製造されていない。この間、プルトニウム燃料第三開発室の主要工程設備の約6割が新設又は更新されるとともに、原料である混合転換粉のAm-241の蓄積が進み、発熱量が増加している。さらに、原料の一つである乾式回収粉末についても、設備の更新によりその粉末特性が大きく変化している。以上を踏まえ、次期「もんじゅ」用低密度MOX燃料ペレット製造を円滑に実施するため、平成16年10月から平成18年8月の間、従来に比べAm-241が蓄積した原料及び粉末特性の大きく変化した乾式回収粉を用いて、低密度MOXペレットの製造条件確認試験を実施した。本報告は、この試験結果をまとめたものである。試験の結果、従来に比べAm-241が蓄積した原料を用いても、製造条件を適切に管理することにより、一次取替燃料製造時と同程度の収率で低密度MOX燃料ペレットが製造可能であることを確認した。

Low density MOX pellets for FBR "MONJU" have not been fabricated in Plutonium Fuel Fabricating Facility (PFPF) for these 9 years since completion of the first reload fuel for "MONJU" in 1995. In this period, about 60 % of machines in the pellet fabrication process of PFPF have been replaced with new ones, and fabrication of MOX pellets for "JOYO" has been continued using these machines. Concerning the feed MOX powders for "MONJU", the amount of decay heat has been increased with increase of accumulated Am-241 in this period. In addition, powder characteristic of recycled MOX powder which is one of feed powders, MH-MOX powder, UO$$_{2}$$ powder and recycled MOX powder, was significantly changed by replacing former processing machine used for scrap recycling with improved one. Using MOX powder with increased decay heat and recycled MOX powder processed by new machine, a series of low density MOX pellet fabrication tests were conducted to confirm pellet fabrication conditions for current pellet fabrication machines from October in 2004 to August in 2006. As a conclusion, it was confirmed that low density MOX pellets could be fabricated using these feed powders and replaced machines by adjusting pellet fabrication conditions adequately. This report summarizes the results of a series of low density MOX pellet fabrication tests.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.