Work hardening, dislocation structure, and load partitioning in lath-martensite determined by neutron diffraction line profile analysis

その場中性子回折ラインプロファイル解析によるラスマルテンサイトの加工硬化、転位構造及び応力分配

Harjo, S.   ; 川崎 卓郎   ; 友田 陽*; Gong, W.*; 相澤 一也  ; Tichy, G.*; Shi, Z.*; Ungr, T.*

Harjo, S.; Kawasaki, Takuro; Tomota, Yo*; Gong, W.*; Aizawa, Kazuya; Tichy, G.*; Shi, Z.*; Ungr, T.*

neutron diffraction during tensile deformation of lath martensite steel containing 0.22 mass% of carbon, is performed using TAKUMI of J-PARC. The diffraction peaks at plastically deformed states exhibit asymmetries as the reflection of redistributions of the stress and dislocation densities/arrangements in lath-packets where the dislocation glides are favorable (soft packet) and unfavorable (hard packet). The dislocation density is as high as 10 m at the as-quenched state, and then during tensile straining, the load and the dislocation density become different between the two lath-packets. The dislocation character and arrangement vary also in the hard packet, but hardly change in the soft packet. The hard packet plays an important role in the high work hardening in martensite, which could be understood by taking into account not only the increase of the dislocation density but also the change in dislocation arrangement.