Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kokubun, Yuji; Nakada, Akira; Seya, Natsumi; Nagaoka, Mika; Koike, Yuko; Kubota, Tomohiro; Hirao, Moe; Yoshii, Hideki*; Otani, Kazunori*; Hiyama, Yoshinori*; et al.
JAEA-Review 2023-052, 118 Pages, 2024/03
JAEA-Review-2023-052.pdf:3.67MB
Based on the regulations (the safety regulation of Tokai Reprocessing Plant, the safety regulation of nuclear fuel material usage facilities, the radiation safety rule, the regulation about prevention from radiation hazards due to radioisotopes, which are related with the nuclear regulatory acts, the local agreement concerning with safety and environment conservation around nuclear facilities, the water pollution control law, and by law of Ibaraki Prefecture), the effluent control of liquid waste discharged from the Nuclear Fuel Cycle Engineering Laboratories of Japan Atomic Energy Agency has been performed. This report describes the effluent control results of the liquid waste in the fiscal year 2022. In this period, the concentrations and the quantities of the radioactivity in liquid waste discharged from the reprocessing plant, the plutonium fuel fabrication facilities, and the other nuclear fuel material usage facilities were much lower than the limits authorized by the above regulations.
-edge for Ce in bauxites using transition-edge sensors; Implications for Ti-rich geological samplesLi, W.*; Yamada, Shinya*; Hashimoto, Tadashi; Okumura, Takuma*; Hayakawa, Ryota*; Nitta, Kiyofumi*; Sekizawa, Oki*; Suga, Hiroki*; Uruga, Tomoya*; Ichinohe, Yuto*; et al.
Analytica Chimica Acta, 1240, p.340755_1 - 340755_9, 2023/02
Times Cited Count：4 Percentile：52.44(Chemistry, Analytical)no abstracts in English
Kitamura, Ryo; Hayashi, Naoki; Hirano, Koichiro; Miyao, Tomoaki*; Miura, Akihiko; Morishita, Takatoshi
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.212 - 214, 2023/01
In the J-PARC linac, the bunch-shape monitor (BSM) is developed to precisely and rapidly measure the longitudinal beam profile at the front-end, towards the improvement of the beam matching. The graphite target having the good strength to the high-power beam, has been introduced in order to resist the heat loading of the high-intensity beam. The resolution and other uncertainties were evaluated for the BSM. The longitudinal Twiss parameters and emittance were measured using the BSM and the IMPACT, which was the 3D particle-in-cell simulation code. The precision of the longitudinal emittance measurement was improved, by implementing uncertainties related to the BSM into the calculation. In this presentation, we will report a series of the measurement result, the method of the beam diagnostics with the BSM at the front-end, and the comparison between the measurement and the beam simulation.
Kumagai, Tomohisa*; Miura, Yasufumi*; Miura, Naoki*; Marie, S.*; Almahdi, R.*; Mano, Akihiro; Li, Y.; Katsuyama, Jinya; Wada, Yoshitaka*; Hwang, J.-H.*; et al.
Journal of Pressure Vessel Technology, 144(1), p.011509_1 - 011509_18, 2022/02
Times Cited Count：1 Percentile：17.53(Engineering, Mechanical)To predict fracture behavior for ductile materials, some ductile fracture simulation methods different from classical approaches have been investigated based on appropriate models of ductile fracture. For the future use of the methods to overcome restrictions of classical approaches, the applicability to the actual components is of concern. In this study, two benchmark problems on the fracture tests supposing actual components were provided to investigate prediction ability of simulation methods containing parameter decisions. One was the circumferentially through-wall and surface cracked pipes subjected to monotonic bending, and the other was the circumferentially through-wall cracked pipes subjected to cyclic bending. Participants predicted the ductile crack propagation behavior by their own approaches, including FEM employed GTN yielding function with void ratio criterion, are FEM employed GTN yielding function, FEM with fracture strain or energy criterion modified by stress triaxiality, XFEM with J or delta J criterion, FEM with stress triaxiality and plastic strain based ductile crack propagation using FEM, and elastic-plastic peridynamics. Both the deformation and the crack propagation behaviors for monotonic bending were well reproduced, while few participants reproduced those for cyclic bending. To reproduce pipe deformation and fracture behaviors, most of groups needed parameters which were determined toreproduce pipe deformation and fracture behaviors in benchmark problems themselves and it is still difficult to reproduce them by using parameters only from basic materials tests.
Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.
Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03
Times Cited Count：44 Percentile：96.99(Astronomy & Astrophysics)Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 
C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.
)Komatsu, Kazuki*; Iwasaki, Tsugumi*; Murata, Kosuke*; Yamashiro, Hideaki*; Goh, V. S. T.*; Nakayama, Ryo*; Fujishima, Yohei*; Ono, Takumi*; Kino, Yasushi*; Shimizu, Yoshinaka*; et al.
Reproduction in Domestic Animals, 56(3), p.484 - 497, 2021/03
Times Cited Count：9 Percentile：85.28(Agriculture, Dairy & Animal Science)We have established an archive system of livestock and wild animals from the surrounding ex-evacuation zone. Wildlife within the alert zone have been exposed to low-dose-rate (LDR) radiation for a long and continuous time. In this study, we analysed the morphological characteristics of the testes and in vitro fertilization (IVF) capacity of cryopreserved sperm of raccoons from the ex-evacuation zone of the FDNPP accident. This study revealed that the chronic and LDR radiation exposure associated with the FDNPP accident had no adverse effect on the reproductive characteristics and functions of male raccoons.
Sumida, Kazuki; Sakuraba, Yuya*; Masuda, Keisuke*; Kono, Takashi*; Kakoki, Masaaki*; Goto, Kazuki*; Zhou, W.*; Miyamoto, Koji*; Miura, Yoshio*; Okuda, Taichi*; et al.
Communications Materials (Internet), 1, p.89_1 - 89_9, 2020/11
Otani, Masashi*; Futatsukawa, Kenta*; Miyao, Tomoaki*; Liu, Y.*; Hirano, Koichiro; Kondo, Yasuhiro; Miura, Akihiko; Oguri, Hidetomo
Journal of Physics; Conference Series, 1350, p.012078_1 - 012078_5, 2019/12
Times Cited Count：1 Percentile：51.67(Physics, Particles & Fields)The Japan Proton Accelerator Research Complex (J-PARC) linac is operated with design peak current of 50 mA from 2018. For operation with such a high beam current, itis important to understand transverse and longitudinal beam properties especially in low-velocity region. A medium energy beam transport (MEBT1) line between the 3-MeV radio-frequency quadrupole linac (RFQ) and the 50-MeV drift-tube linac (DTL) is a 3-m-long transport line to match the beam to the DTL and produce a macro pulse configuration for a 3-GeV rapid-cycling synchrotron (RCS). In this paper, recent measurements and beam tuning results in MEBT1 will be presented.
Watanabe, Tamaki*; Toyama, Takeshi*; Hanamura, Kotoku*; Imao, Hiroshi*; Kamigaito, Osamu*; Kamoshida, Atsushi*; Kawachi, Toshihiko*; Koyama, Ryo*; Sakamoto, Naruhiko*; Fukunishi, Nobuhisa*; et al.
Proceedings of 16th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1105 - 1108, 2019/07
Upgrades for the RIKEN heavy-ion linac (RILAC) involving a new superconducting linac (SRILAC) are currently underway at the RIKEN radioactive isotope beam factory (RIBF). It is crucially important to develop nondestructive beam measurement diagnostics. We have developed a beam energy position monitor (BEPM) system which can measure not only the beam position but also the beam energy simultaneously by measuring the time of flight of the beam. We fabricated 11 BEPMs and completed the position calibration to obtain the sensitivity and offset for each BEPMs. The position accuracy has been achieved to be less than 
0.1 mm by using the mapping measurement.
beam dynamics in J-PARC LEBTShibata, Takanori*; Ikegami, Kiyoshi*; Liu, Y.*; Miura, Akihiko; Naito, Fujio*; Nammo, Kesao*; Oguri, Hidetomo; Okoshi, Kiyonori; Otani, Masashi*; Shinto, Katsuhiro; et al.
Proceedings of 29th International Linear Accelerator Conference (LINAC 2018) (Internet), p.519 - 521, 2019/01
Transport process of negative hydrogen ion (H) in LEBT (Low Energy Beam Transport) is investigated by comparison of experimental and numerical results. A three dimensional Particle-In-Cell (PIC) particle transport model has been developed in order to take into account (i) axial magnetic field by two solenoids in J-PARC LEBT and (ii) radial electric field by space charge (SC) effect. Ratio of H
beam particles inside the RFQ (Radio Frequency Quadrupole) acceptance to the total particles at the RFQ entrance is calculated for different current conditions in LEBT solenoid 1 and 2. The results are compared with RFQ transmission rate measured in the J-PARC linac commissioning. The double peak of RFQ transmission rate to the solenoid applied current seen in the measurement is explained by the calculation results. The results indicate that presence of the LEBT orifice for differential pumping plays a role as a collimator to reduce emittance at RFQ entrance.
Hayashi, Naoki; Hatakeyama, Shuichiro; Miura, Akihiko; Yoshimoto, Masahiro; Futatsukawa, Kenta*; Miyao, Tomoaki*
Proceedings of 7th International Beam Instrumentation Conference (IBIC 2018) (Internet), p.219 - 223, 2019/01
J-PARC is a multi-purpose facility. Accelerator stability is the one of important issues for users of this facility. To realize stable operation, we must collect data on interlocked events and analyze these data to determine the reasons for the occurrence of such events. In J-PARC Linac, data of interlocked events have been recorded using several some beam loss monitors and current monitors, and these data have been are analyzed and classified. In J-PARC RCS, new instrumentation is being introduced to obtain beam position. We discuss the present status and future plans related to this subject.
Otani, Masashi*; Futatsukawa, Kenta*; Hirano, Koichiro; Kondo, Yasuhiro; Miura, Akihiko; Oguri, Hidetomo; Liu, Y.*
Nuclear Instruments and Methods in Physics Research A, 908, p.313 - 317, 2018/11
Times Cited Count：1 Percentile：11.35(Instruments & Instrumentation)It is extremely important to diagnose beams in accelerators to improve accelerator operation. In the low velocity section of a proton or heavy ion linac, the diagnostic method for longitudinal beam properties is less established compared to that for transverse properties. We have developed a new diagnostic method for the longitudinal bunch size by utilizing an RF deflector. We evaluated the uncertainty in bunch size measurement through simulation, and it was obtained as 0.5. In addition, we measured longitudinal beam emittance through bunch size measurements at several RF amplitudes of an upstream buncher. The measured emittance was 0.130.01
deg
MeV, which was consistent with the simulation result.
ion sourceShinto, Katsuhiro; Shibata, Takanori*; Miura, Akihiko; Miyao, Tomoaki*; Wada, Motoi*
AIP Conference Proceedings 2011, p.080016_1 - 080016_3, 2018/09
Times Cited Count：6 Percentile：93.67(Physics, Applied)Moriya, Katsuhiro; Kawane, Yusuke*; Miura, Akihiko; Futatsukawa, Kenta*; Miyao, Tomoaki*
Journal of Physics; Conference Series, 1067, p.072009_1 - 072009_3, 2018/09
Times Cited Count：0 Percentile：0.11(Physics, Particles & Fields)no abstracts in English
Kamiya, Junichiro; Ogiwara, Norio*; Miura, Akihiko; Kinsho, Michikazu; Hikichi, Yusuke*
Journal of Physics; Conference Series, 1067, p.072006_1 - 072006_6, 2018/09
Times Cited Count：2 Percentile：67.51(Physics, Particles & Fields)A beam profile monitor using interaction between the beam and the gas molecules distributed in sheet shape has been developed. Ions or luminescence generated by passing the beam through the gas sheet has the information of cross-section shape of the beam. The gas sheet beam monitor will become a useful tool to measure the profile of high power beams because it has no breakable element such as wires. Furthermore, 2-D beam profile can be obtaine at a certain position of beam line. We applied the gas-sheet based beam profile monitor to J-PARC LINAC, where the negative hydrogen atoms are accelerated to the energy of 400 MeV. The vacuum system was carefully designed not to make an unacceptable pressure rise in nearby cavities when the gas was injected. The clear image of the beam profile was successfully obtained by detecting the ionized N gas.
laser stripping at J-PARC 3-GeV RCSSaha, P. K.; Harada, Hiroyuki; Kinsho, Michikazu; Miura, Akihiko; Yoshimoto, Masahiro; Okabe, Kota; Suganuma, Kazuaki; Yamane, Isao*; Irie, Yoshiro*; Liu, Y.*; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.806 - 810, 2018/08
Watanabe, Tamaki*; Imao, Hiroshi*; Kamigaito, Osamu*; Sakamoto, Naruhiko*; Fukunishi, Nobuhisa*; Fujimaki, Masaki*; Yamada, Kazunari*; Watanabe, Yutaka*; Koyama, Ryo*; Toyama, Takeshi*; et al.
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.49 - 54, 2018/08
no abstracts in English
Miyao, Tomoaki*; Miura, Akihiko
Proceedings of 15th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1031 - 1034, 2018/08
no abstracts in English
Saha, P. K.; Harada, Hiroyuki; Kinsho, Michikazu; Miura, Akihiko; Yoshimoto, Masahiro; Irie, Yoshiro*; Yamane, Isao*; Yoneda, Hitoki*; Michine, Yurina*
Proceedings of 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB 2018) (Internet), p.422 - 427, 2018/07
Miura, Akihiko; Moriya, Katsuhiro; Miyao, Tomoaki*
Proceedings of 9th International Particle Accelerator Conference (IPAC '18) (Internet), p.5022 - 5025, 2018/06
A wire-scanner monitor using metallic wire is reliably employed for the beam-profile measurement in the J-PARC linac. Because the loading of negative hydrogen (H) ion beam on a wire increases under high-current beam operation, we focus on using a high-durability beam profile monitors by attaching another wire material. Carbon nanotubes (CNT) are made of graphite in a cylindrical shape and have a tensile strength not less than 100 times that of steel. The electric conductivity has higher than that of metals, and hardness is endured thermally around 3000C in a vacuum circumstance. We applied the wires made from CNT to WSM and measured transverse profiles with a 3-MeV H beam. As a result, we obtained the equivalent signal levels taken by carbon wire made of polyacrylonitrile without any damage. In this paper, the signal response when the CNT is irradiated with an H beam and the result of beam profile measurement. In addition, the surface of CNT after 3-MeV beam operation was observed.
