PANDORA Project for the study of photonuclear reactions below

Tamii, Atsushi*; Pellegri, L.*; Sderstrm, P.-A.*; Allard, D.*; Goriely, S.*; Inakura, Tsunenori*; Khan, E.*; Kido, Eiji*; Kimura, Masaaki*; Litvinova, E.*; et al.

European Physical Journal A, 59(9), p.208_1 - 208_21, 2023/09

https://doi.org/10.1140/epja/s10050-023-01081-w

no abstracts in English

Level structures of Ca cast doubt on a doubly magic Ca

Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; Tsunoda, Yusuke*; Otsuka, Takaharu*; Chazono, Yoshiki*; Hagen, G.*; Holt, J. D.*; et al.

Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08

https://doi.org/10.1016/j.physletb.2023.138025

Gamma decays were observed in Ca and Ca following quasi-free one-proton knockout reactions from Sc. For Ca, a ray transition was measured to be 1456(12) keV, while for Ca an indication for a transition was observed at 1115(34) keV. Both transitions were tentatively assigned as the decays. A shell-model calculation in a wide model space with a marginally modified effective nucleon-nucleon interaction depicts excellent agreement with experiment for level energies, two-neutron separation energies, and reaction cross sections, corroborating the formation of a new nuclear shell above the N = 34 shell. Its constituents, the and orbitals, are almost degenerate. This degeneracy precludes the possibility for a doubly magic Ca and potentially drives the dripline of Ca isotopes to Ca or even beyond.

Deformation mechanism of a strong and ductile maraging steel investigated using X-ray synchrotron diffraction

Li, H.*; Liu, Y.*; Zhao, W.*; Liu, B.*; Tominaga, Aki; Shobu, Takahisa; Wei, D.*

International Journal of Plasticity, 165, p.103612_1 - 103612_20, 2023/06

https://doi.org/10.1016/j.ijplas.2023.103612

In order to clarify the strength properties of Co-free maraging steel, tensile experiment using high energy synchrotron X-ray diffraction was performed. Diffraction profiles from the martensitic and austenitic phases were obtained, and their strength and width were observed to vary as loading. Analysis of the diffraction profiles showed that the content of martensite in the as-aged material decreased slowly at low stress levels and decreased rapidly at high stress levels. On the other hand, the austenite phase in the as-solution materials was significantly transformed the martensite phase as the stress increased. It was clarified to be responsible for their respective strength properties.

Pressure-modulated magnetism and negative thermal expansion in the HoFe intermetallic compound

Cao, Y.*; Zhou, H.*; Khmelevskyi, S.*; Lin, K.*; Avdeev, M.*; Wang, C.-W.*; Wang, B.*; Hu, F.*; Kato, Kenichi*; Hattori, Takanori; et al.

Chemistry of Materials, 35(8), p.3249 - 3255, 2023/04

https://doi.org/10.1021/acs.chemmater.3c00158

Hydrostatic and chemical pressure are efficient stimuli to alter the crystal structure and are commonly used for tuning electronic and magnetic properties in materials science. However, chemical pressure is difficult to quantify and a clear correspondence between these two types of pressure is still lacking. Here, we study intermetallic candidates for a permanent magnet with a negative thermal expansion (NTE). Based on in situ synchrotron X-ray diffraction, negative chemical pressure is revealed in HoFe on Al doping and quantitatively evaluated by using temperature and pressure dependence of unit cell volume. A combination of magnetization and neutron diffraction measurements also allowed one to compare the effect of chemical pressure on magnetic ordering with that of hydrostatic pressure. Intriguingly, pressure can be used to control suppression and enhancement of NTE. Electronic structure calculations indicate that pressure affected the top of the majority band with respect to the Fermi level, which has implications for the magnetic stability, which in turn plays a critical role in modulating magnetism and NTE. This work presents a good example of understanding the effect of pressure and utilizing it to control properties of functional materials.

Multiple mechanisms in proton-induced nucleon removal at 100 MeV/nucleon

Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; Gmez-Ramos, M.*; Ogata, Kazuyuki*; Yoshida, Kazuki; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.

Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04

https://doi.org/10.1103/PhysRevLett.130.172501

We report on the first proton-induced single proton- and neutron-removal reactions from the neutron deficient O nucleus with large Fermi-surface asymmetry at 100 MeV/nucleon. Our results provide the first quantitative contributions of multiple reaction mechanisms including the quasifree knockout, inelastic scattering, and nucleon transfer processes. It is shown that the inelastic scattering and nucleon transfer, usually neglected at such energy regime, contribute about 50% and 30% to the loosely bound proton and deeply bound neutron removal, respectively.

Large collectivity in Ne at the boundary of the island of inversion

Revel, A.*; Wu, J.*; Iwasaki, Hironori*; Ash, J.*; Bazin, D.*; Brown, B. A.*; Chen, J.*; Elder, R.*; Farris, P.*; Gade, A.*; et al.

Physics Letters B, 838, p.137704_1 - 137704_7, 2023/03

https://doi.org/10.1016/j.physletb.2023.137704

no abstracts in English

Stability of allowable flaw angles for high toughness ductile pipes subjected to bending stress in the ASME Code Section XI

Hasegawa, Kunio; Strnadel, B.*; Li, Y.; Lacroix, V.*

Journal of Pressure Vessel Technology, 144(6), p.061202_1 - 061202_6, 2022/12

https://doi.org/10.1115/1.4054620

When pipe walls are thin, part-through flaws are easily develop into through-wall flaws, and the likelihood of coolant leakage is high. The ASEM Code Section XI provides final allowable flaw angles of through-wall flaw for thin-wall pipes. The final allowable angles are applied to pipes in order to maintain structural integrity if the part-through flaws become through-wall flaws. To ensure that this stability is compromised, plastic collapse stresses for through-wall flaws are combined with allowable stresses. However, the final allowable angles of through-wall flaws are not identified for thin-walled pipes. This paper compares plastic collapse stresses of through-wall flaws and allowable stresses of part-through flaws for pipes. The comparison of these stresses is used to derive the final allowable angles of through-wall flaws. The angles can be expressed either in the form of exact solutions or as conventional options that are appropriate for various service level conditions.

"Southwestern" boundary of the island of inversion; First study of low-lying bound excited states in V and V

Elekes, Z.*; Juhsz, M. M.*; Sohler, D.*; Sieja, K.*; Yoshida, Kazuki; Ogata, Kazuyuki*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; Baba, Hidetada*; et al.

Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12

https://doi.org/10.1103/PhysRevC.106.064321

The low-lying level structure of V and V was investigated for the first time. The neutron knockout reaction and inelastic proton scattering were applied for V while the neutron knock-out reaction provided the data for V. Four and five new transitions were determined for V and V, respectively. Based on the comparison to our shell-model calculations using the Lenzi-Nowacki-Poves-Sieja (LNPS) interaction, three of the observed rays for each isotope could be placed in the level scheme and assigned to the decay of the first 11/2 and 9/2 levels. The (,) excitation cross sections for V were analyzed by the coupled-channels formalism assuming quadrupole plus hexadecapole deformations. Due to the role of the hexadecapole deformation, V could not be unambiguously placed on the island of inversion.

Allowable cracks related to penetration for part-through cracks in pipes subjected to bending stresses

Hasegawa, Kunio; Li, Y.; Strnadel, B.*; Udyawar, A.*

Journal of Pressure Vessel Technology, 144(5), p.051305_1 - 051305_6, 2022/10

https://doi.org/10.1115/1.4053482

Fully plastic collapse stresses for circumferentially part-through cracked pipes subjected to bending stresses are estimated by Limit Load Criteria provided by the ASME Code Section XI. Allowable crack depths were determined by using the Limit Load Criteria and that are tabulated in the ASME Code Section XI for different plant service level conditions. On the other hand, crack penetration bending stresses for part-through cracked pipes were estimated by using the Local Approach of Limit Load Criteria. By using these Criteria, the study presented in this paper obtained allowable crack depths at penetration for circumferentially part-through cracked pipes. Comparing the allowable crack depths obtained by both methods for each service level, it is evident that the allowable crack depths at penetration calculated by the Local Approach of Limit Load Criteria are almost always smaller than those at fully plastic collapse stresses calculated by the Limit Load Criteria. It was found that the allowable crack depths provided by the ASME Code Section XI are less conservative for crack penetrations.

Improved measurement of the 0 transition strength for Se using the SPICE spectrometer

Smallcombe, J.; Garnsworthy, A. B.*; Korten, W.*; Singh, P.*; Ali, F. A.*; Andreoiu, C.*; Ansari, S.*; Ball, G. C.*; Barton, C. J.*; Bhattacharjee, S. S.*; et al.

Physical Review C, 106(1), p.014312_1 - 014312_9, 2022/07

https://doi.org/10.1103/PhysRevC.106.014312