Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Shobu, Takahisa; Shiro, Ayumi*; Kono, Fumiaki*; Muramatsu, Toshiharu; Yamada, Tomonori; Naganuma, Masayuki; Ozawa, Takayuki
Quantum Beam Science (Internet), 5(2), p.17_1 - 17_9, 2021/06
The automotive industries employ laser beam welding because it realizes a high energy density without generating irradiation marks on the opposite side of the irradiated surface. Typical measurement techniques such as strain gauges and tube X-rays cannot assess the localized strain at a joint weld. Herein high-energy synchrotron radiation X-ray diffraction was used to study the internal strain distribution of laser lap joint PNC-FMS steels (2- and 5-mm thick) under loading at a high temperature. As the tensile load increased, the local tensile and compressive strains increased near the interface. These changes agreed well with the finite element analysis results. However, it is essential to complementarily utilize internal defect observations by X-ray transmission imaging because the results depend on the defects generated by laser processing.
Miyakawa, Susumu*; Ito, Toshimasa*; Iwahori, Keisuke*; Aoyama, Yoshihiko*; Kubo, Ryosuke*; Murata, Shinji*; Shobu, Takahisa; Shiro, Ayumi*; Kajiwara, Kentaro*
Zairyo, 69(4), p.308 - 314, 2020/04
White etching area which looks white with nital corrosive liquid may be recognized at the flaking part of a rolling bearing on which high contact stress of several GPa is applied repeatedly. Up to now, studies of white etching area of a ball have been less than studies of white etching area of inner and outer rings. In this study, as part of the flaking mechanism explication with white etching area of a ball, internal residual stress distributions of ball by using high energy white X-ray of SPring-8 (A method) and laboratorial X-ray measurement equipment (B method) were investigated. The former was modified by surface residual stress according to B method. The latter was modified by releasing stress in the form of electrolytic polishing. The results showed modified residual stress distributions almost agree qualitatively.
Shobu, Takahisa; Shiro, Ayumi; Zhang, S.*; Yamada, Tomonori; Muramatsu, Toshiharu; Kono, Fumiaki; Ozawa, Takayuki
no journal, ,
The laser welding method is expected to be applied to the joint between inner and outer ducts for the fast reactor fuel assemblies with inner duct structure. In this study, an anneal effect of the residual stresses in the laser welded steel was investigated using the in-situ strain measurement technique with high energy synchrotron X-rays. We have succeeded in observation of the phenomenon that elastic strain is relaxed before annealing process and the dislocation density gradually decreases thereafter. In addition it was found that the FWHM is a useful parameter for in-situ evaluation of the heat treatment process to effectively optimize the heat treatment condition.
