検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 131 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

High temperature gas-cooled reactors

武田 哲明*; 稲垣 嘉之; 相原 純; 青木 健; 藤原 佑輔; 深谷 裕司; 後藤 実; Ho, H. Q.; 飯垣 和彦; 今井 良行; et al.

High Temperature Gas-Cooled Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.5, 464 Pages, 2021/02

本書は、原子力機構における今までの高温ガス炉の研究開発の総括として、HTTRの設計、燃料、炉内構造物や中間熱交換器などの要素技術の開発、出力上昇試験、950$$^{circ}$$Cの高温運転、安全性実証試験などの運転経験及び成果についてまとめたものである。また、HTTRでの知見をもとに、商用炉の設計、高性能燃料、ヘリウムガスタービン、ISプロセスによる水素製造などの要素技術開発の現状について記述しており、今後の高温ガス炉の開発に非常に有用である。本書は、日本機械学会の動力エネルギーシステム部門による化石燃料及び原子力によるエネルギーシステムの技術書のシリーズの一冊として刊行されるものである。

論文

Establishment of reasonable 2-D model to investigate heat transfer and flow characteristics by using scale model of vessel cooling system for HTTR

高田 昌二; Ngarayana, I. W.*; 中津留 幸裕*; 寺田 敦彦; 村上 健太*; 沢 和弘*

Mechanical Engineering Journal (Internet), 7(3), p.19-00536_1 - 19-00536_12, 2020/06

高温工学試験研究炉(HTTR)を使った炉心冷却喪失試験では、財産保護上の観点から、炉容器冷却設備(VCS)において自然対流により加熱される構造物の温度分布の評価精度向上を課題としている。伝熱流動数値解析コードFLUENTをHTTRのVCSに適用するために、予測精度を維持しつつ計算資源を節約できる合理的な2次元モデルの構築を始めた。本評価モデルの検証のため、HTTR用VCSの1/6スケールモデルによる構造物の温度に関する試験結果を使用し、解析による計算結果と比較した。本試験データは、圧力容器の温度を200$$^{circ}$$C前後に設定することで、全除熱量における自然対流伝熱の割合を20%前後と有意なレベルの伝熱現象として測定したものである。自然対流による上昇流の影響で高温となる圧力容器上部の伝熱流動特性の評価精度向上のためには、実形状の模擬および自然対流に適した乱流モデルの選定が重要となる。乱流モデルとして、剥離,再付着及び遷移流れを考慮できる$$kappa$$-$$omega$$-SSTモデルを選定し、従来の$$kappa$$-$$varepsilon$$モデルでは再現されなかった圧力容器の温度分布の試験結果とよく一致していることを確認した。この結果、圧力容器上部にホットスポットがなく、模擬炉心により加熱された高温のヘリウムガスが乱流によりよく混合され圧力容器上部を均一に加熱する様子を適切に評価した。

論文

VHTR technology development in Japan; Progress of R&D activities for GIF VHTR system

柴田 大受; 佐藤 博之; 植田 祥平; 竹上 弘彰; 高田 昌二; 國富 一彦

2018 GIF Symposium Proceedings (Internet), p.99 - 106, 2020/05

第四世代原子力システムの一つである超高温ガス炉(VHTR)システムについて、原子力研究開発機構で実施している研究開発活動の進捗についてまとめた。高温工学試験研究炉(HTTR)は2010年に原子炉出口温度950$$^{circ}$$Cでの50日間連続運転を達成し、その際、被覆粒子燃料の優れた品質を示した。また、高燃焼度化に向けてZrC被覆粒子の開発を進めている。炉内の構造物に用いる黒鉛の耐酸化性の向上のため、黒鉛へのSiC被覆について中性子照射の影響を調べている。将来の商用高温ガス炉コジェネレーションシステムについて、国際的な安全基準の整備を進めている。HTTRは新規制基準の適合性審査を経て、2019年に再稼働を見込んでいる。ISプロセス連続水素製造試験設備では、2016年に31時間の連続試験が完了した。HTTRでの水素製造-ガスタービン試験に向けた基本設計を完了した。

論文

Promising neutron irradiation applications at the high temperature engineering test reactor

Ho, H. Q.; 本多 友貴*; 濱本 真平; 石井 俊晃; 高田 昌二; 藤本 望*; 石塚 悦男

Journal of Nuclear Engineering and Radiation Science, 6(2), p.021902_1 - 021902_6, 2020/04

High temperature engineering test reactor (HTTR), a prismatic type of the HTGR, has been constructed to establish and upgrade the basic technologies for the HTGRs. Many irradiation regions are reserved in the HTTR to be served as a potential tool for an irradiation test reactor in order to promote innovative basic researches such as materials, fusion reactor technology, and radiation chemistry and so on. This study shows the overview of some possible irradiation applications at the HTTRs including neutron transmutation doping silicon (NTD-Si) and iodine-125 ($$^{125}$$I) productions. The HTTR has possibility to produce about 40 tons of doped Si-particles per year for fabrication of spherical silicon solar cell. Besides, the HTTR could also produce about 1.8$$times$$10$$^{5}$$ GBq/year of $$^{125}$$I isotope, comparing to 3.0$$times$$10$$^{3}$$ GBq of total $$^{125}$$I supplied in Japan in 2016.

論文

Establishment of numerical model to investigate heat transfer and flow characteristics by using scale model of vessel cooling system for HTTR

高田 昌二; Ngarayana, I. W.*; 中津留 幸裕*; 寺田 敦彦; 村上 健太*; 澤 和彦*

Proceedings of 27th International Conference on Nuclear Engineering (ICONE-27) (Internet), 13 Pages, 2019/05

高温工学試験研究炉(HTTR)を使った炉心冷却喪失試験では、財産保護上の観点から、炉容器冷却設備(VCS)において自然対流により加熱される構造物の温度分布の評価精度向上を課題としている。伝熱流動数値解析コードFLUENTをHTTRのVCSに適用するために、予測精度を維持しつつ計算資源を節約できる合理的な2次元モデルの構築を始めた。本評価モデルの検証のため、HTTR用VCSの1/6スケールモデルによる構造物の温度に関する試験結果を使用し、解析による計算結果と比較した。本試験データは、圧力容器の温度を200$$^{circ}$$C前後に設定することで、全除熱量における自然対流伝熱の割合を20%前後と有意なレベルの伝熱現象として測定したものである。自然対流による上昇流の影響で高温となる圧力容器上部の伝熱流動特性の評価精度向上のためには、実形状の模擬および自然対流に適した乱流モデルの選定が重要となる。乱流モデルとして、剥離,再付着及び遷移流れを考慮できるk-$$omega$$-SSTモデルを選定し、従来のk-$$varepsilon$$モデルでは再現されなかった圧力容器の温度分布の試験結果とよく一致していることを確認した。このことから、k-$$omega$$-SSTモデルは、圧力容器上部の温度分布を剥離、再付着および遷移流れを再現できたと考えられ、本モデルはVCSの温度評価の精度向上に有効であることを明らかにした。

論文

Feasibility study of new applications at the high-temperature gas-cooled reactor

Ho, H. Q.; 本多 友貴*; 濱本 真平; 石井 俊晃; 高田 昌二; 藤本 望*; 石塚 悦男

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 6 Pages, 2018/10

Besides the electricity generation and hydrogen production, HTGRs have many advantages for thermal neutron irradiation applications such as stable operation in longterm, large space available for irradiation target, and high thermal neutron economy. This study summarized the feasibility of new irradiation applications at the HTGRs including neutron transmutation doping silicon and I-125 productions. The HTTR located in Japan was used as a reference HTGR in this study. Calculation results show that HTTR could irradiate about 40 tons of doped Si particles per year for fabrication of spherical silicon solar cell. Besides, the HTTR could also produce about 1.8x105 GBq in a year of I-125, comparing to 3.0x103 GBq of total I-125 supplied in Japan in 2016.

論文

Numerical evaluation on fluctuation absorption characteristics based on nuclear heat supply fluctuation test using HTTR

高田 昌二; 本多 友貴*; 稲葉 良知; 関田 健司; 根本 隆弘; 栃尾 大輔; 石井 俊晃; 佐藤 博之; 中川 繁昭; 沢 和弘*

Proceedings of 9th International Topical Meeting on High Temperature Reactor Technology (HTR 2018) (USB Flash Drive), 7 Pages, 2018/10

HTGRに接続する核熱利用システムの設計では、化学プラント会社の容易な参入を可能にするため、非原子炉級で設計されるが、熱利用システムで異常が発生した場合でも原子炉の運転を継続できることとしている。需要地近接立地で負荷追従運転を実現するため、原子炉入口および出口冷却材温度を一定に保ちながら一次系ガス圧力を変化させるインベントリ制御は原子炉出力を制御する方法の候補の1つとされている。HTTRを用いた非核加熱運転による熱負荷変動吸収試験結果をもとに、異なる一次系ガス圧力で原子炉入口温度をステップ状に変動させた。数値解析の結果、圧力の低下により変動吸収特性が劣化しないことが明らかになった。また、原子炉出力の80%でも、原子炉出口温度がスクラムレベルに達しないことも明らかにした。

論文

Comprehensive seismic evaluation of HTTR against the 2011 off the Pacific coast of Tohoku Earthquake

小野 正人; 飯垣 和彦; 澤畑 洋明; 島崎 洋祐; 清水 厚志; 猪井 宏幸; 近藤 俊成; 小嶋 慶大; 高田 昌二; 沢 和弘

Journal of Nuclear Engineering and Radiation Science, 4(2), p.020906_1 - 020906_8, 2018/04

2011年3月11日、地震の規模を示すマグニチュード9.0の東北地方太平洋沖地震が発生した。地震発生時、HTTRは定期点検及び機器の保守管理のため停止していた。HTTRで観測された最大加速度は設計基準地震を超えていたため、総合的な健全性評価を実施した。総合的な健全性評価の考えは2つに分けられる。1つは機器の目視点検であり、1つは観測波を用いた耐震解析である。運転に関わる全ての機器は目視点検を実施した。設備の健全性は点検結果や解析結果により確認した。機器の耐震解析や目視点検の結果、損傷や機能低下は無く、原子炉の運転に関わる問題は無かった。HTTRの健全性は2011年, 2013年, 2015年のコールド状態の運転によっても裏付けられた。さらに、2015年に中性子源を交換するために3つの制御棒案内ブロックと6つの可動反射体ブロックを原子炉から取り出したとき、制御棒案内ブロックの健全性を目視により確認した。

論文

Investigation of uncertainty caused by random arrangement of coated fuel particles in HTTR criticality calculations

Ho, H. Q.; 本多 友貴; 後藤 実; 高田 昌二

Annals of Nuclear Energy, 112, p.42 - 47, 2018/02

 被引用回数:8 パーセンタイル:63.44(Nuclear Science & Technology)

Coated fuel particle (CFP) is one of important factors attributing to the inherent safety feature of high temperature engineering test reactor (HTTR). However, the random arrangement of CFPs makes the simulation more complicated, becoming one of the factors affects the accuracy of the HTTR criticality calculations. In this study, an explicit random model for CFPs arrangement, namely realized random packing (RRP), was developed for the whole core of HTTR using a Monte-Carlo MCNP6 code. The effect of random placement of CFPs was investigated by making a comparison between the RRP and conventional uniform models. The results showed that the RRP model gave a lower excess reactivity than that of the uniform model, and the more number of fuel columns loading into the core, the greater the difference in excess reactivity between the RRP and uniform models. For example, the difference in excess reactivity increased from 0.07 to 0.17%$$Delta$$k/k when the number of fuel column increased from 9 to 30. Regarding the control rods position prediction, the RRP showed the results, which were closer to experiment than the uniform model. In addition, the difference in control rods position between the RRP and uniform models also increases from 12 to 17 mm as increasing number of fuel columns from 19 to 30.

論文

Loss of core cooling test with one cooling line inactive in Vessel Cooling System of High-Temperature Engineering Test Reactor

藤原 佑輔; 根本 隆弘; 栃尾 大輔; 篠原 正憲; 小野 正人; 高田 昌二

Journal of Nuclear Engineering and Radiation Science, 3(4), p.041013_1 - 041013_8, 2017/10

HTTRにおいて、原子炉出力が9MWの状態かつ炉心流量の喪失を模擬した状態において炉心冷却喪失状態を模擬するためにVCS1系統を停止させた。試験の結果、炉内構造物の温度変化は緩慢であった。また、RPV温度は数度下降し、遮蔽体コンクリートの温度上昇は1度以下であった。VCS冷却管を詳細にモデル化した解析ではVCS冷却管の温度上昇はおよそ15度であり、遮蔽体コンクリートの影響が小さいことを明らかにした。これらの結果から、VCS1系統停止状態であっても冷却能力は保たれることを明らかにした。

論文

Numerical investigation of the random arrangement effect of coated fuel particles on the criticality of HTTR fuel compact using MCNP6

Ho, H. Q.; 本多 友貴; 後藤 実; 高田 昌二

Annals of Nuclear Energy, 103, p.114 - 121, 2017/05

 被引用回数:8 パーセンタイル:61.68(Nuclear Science & Technology)

This study investigated the random arrangement effect of Coated Fuel Particle (CFP) on criticality of the fuel compact of High-Temperature engineering Test Reactor (HTTR). A utility program coupling with MCNP6, namely Realized Random Packing (RRP), was developed to model a random arrangement of the CFPs explicitly for the specified fuel compact of HTTR. The criticality and neutronic calculations for pin cell model were performed by using the Monte Carlo MCNP6 code with an ENDF/B-VII.1 neutron library data. First, the reliability of the RRP model was confirmed by an insignificant variance of the infinite multiplication factor (k$$_{rm inf}$$) among 10 differently random arrangements of the CFPs. Next, the criticality of RRP model was compared with those of Non-truncated Uniform Packing (NUP) model and On-the-fly Random Packing (ORP) model which is a stochastic geometry capability in MCNP6. The results indicated that there was no substantial difference between the NUP and ORP models. However, the RRP model presented a lower k$$_{rm inf}$$ of about 0.32-0.52%$$Delta$$k/k than the NUP model. In additions, the difference of k$$_{rm inf}$$ could be increased as the uranium enrichment decreases. The investigation of the 4-factor formula showed that the difference of k$$_{rm inf}$$ was predominantly given by the resonance escape probability, with the RRP model showing the smallest value.

論文

Benchmark study on realized random packing model for coated fuel particles of HTTR using MCNP6

Ho, H. Q.; 守田 圭介*; 本多 友貴; 藤本 望*; 高田 昌二

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 8 Pages, 2017/04

The Coated Fuel Particle plays an important role in the excellent safety feature of the High Temperature Gas-cooled Reactor. However, the random distribution of CFPs also makes the simulation of HTGR fuel become more complicated. The Monte Carlo N-particle (MCNP) code is one of the most well-known codes for validation of nuclear systems; unfortunately, it does not provide an appropriate function to model a statistical geometry explicitly. In order to deal with the stochastic media, a utility program for the random model, namely Realized Random Packing (RRP), has been developed particularly for High Temperature engineering Test Reactor (HTTR). This utility program creates a number of random points in an annular geometry. Then, these random points will be used as the center coordinate of CFPs in the MCNP6 input file and therefore the actual random arrangement of CFPs can be simulated explicitly. First, a pin-cell calculation was carried out to validate the RRP by comparing with Statistical Geometry (STG) model of MVP code. After that, the comparison between the RRP model (MCNP) and STG model (MVP) was shown in whole core criticality calculation, not only for the annular core but also for the fully-loaded core. The comparison of numerical results showed that the RRP model and STG model differed insignificantly in the multiplication factor as expected, regardless of the pin-cell or whole core calculations. In addition, the RRP model did not make the calculation time increase a lot in comparison with the conventional regular model (uniform arrangement).

論文

Measurement of temperature response of intermediate heat exchanger in heat application system abnormal simulating test using HTTR

小野 正人; 藤原 佑輔; 本多 友貴; 佐藤 博之; 島崎 洋祐; 栃尾 大輔; 本間 史隆; 澤畑 洋明; 飯垣 和彦; 高田 昌二

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 5 Pages, 2017/04

日本原子力研究開発機構は、HTTRを用いて高温ガス炉の核熱利用に向けて研究開発を実施している。高温ガス炉を用いた核熱利用システムは、化学プラント会社の参入の簡素化や建設費の観点から非原子力級を基本として設計している。そのため、原子炉の運転中に異常事象が発生して運転を継続できる必要がある。HTTRを用いた熱利用系異常模擬試験は、中間熱交換器の過渡温度挙動のデータを得るために温度に着目し非核熱で実施した。中間熱交換器は熱利用系とHTTRをつなげる重要な機器である。試験では、ヘリウム冷却材温度はガス循環機によって120$$^{circ}$$Cまで昇温され、熱移動に着目できる理想的な状況で実施された。試験は空気冷却器の流量を増加することによりヘリウムガスの温度を調節することで実施された。中間熱交換器の熱応答は調査され、伝熱管や伝熱促進板のような構成要素に対して、中間熱交換器の上部よりも下部の方が熱応答が遅いことが明らかとなった。この理由は、中間熱交換器の上部から下部に二次ヘリウムが流れるためと考えられえる。試験データは、安全評価コードのモデルを検証するために有益となるものである。

論文

Study of the reduction method of the helium gas leakage from bolted gasket flanged connection for HTGRs

濱本 真平; 高田 昌二

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 4 Pages, 2017/04

High temperature gas-cooled reactors (HTGRs) use helium as coolant. Because helium tends to leak, welding is often used for joints of pipes and containers. However, the bolt fastening flange is useful for enhancing the maintainability of the industrial plant. If the helium leak characteristic of the bolt fastening flange is clarified and the factor that reduces the leakage of helium can be controlled, it can lead to the reduction of the leak rate of helium. In this study, it was clarified that the temperature difference between the flange surfaces strongly influences the helium leak rate from the flange by experiment using Helium Gas Circulator installed in High Temperature engineering Test Reactor. We also demonstrated that helium leak can be reduced by using this correlation by controlling the flange temperature.

報告書

Neutronic characteristic of HTTR fuel compact with various packing models of coated fuel particle

Ho, H. Q.; 本多 友貴; 後藤 実; 高田 昌二

JAEA-Technology 2016-040, 16 Pages, 2017/03

JAEA-Technology-2016-040.pdf:2.89MB

高温工学試験研究炉(HTTR)の臨界特性に対する被覆粒子燃料(CFP)のトランケーション(切欠き)の影響を調べるため、燃料コンパクト中のCFPの配列に関する4つの異なるモデル、すなわち、規則配列でトランケーションの有無のモデル、不規則配列でトランケーションの有無のモデルを作り、モンテカルロコードMCNP6、ENDF/B-VII.1ライブラリを使って臨界計算を実施した。この結果、トランケーションありのモデルの無限実効増倍率は、k$$_{rm inf}$$トランケーション無しの場合と比較して小さくなり、規則・不規則配列に関係しないことを明らかにした。さらに、4因子公式の4因子の比較により、k$$_{rm inf}$$の違いが主に共鳴を逃れる確率によるものであることを明らかにした。また、共鳴を逃れる確率の違いはCFPのトランケーションモデルの等価直径が小さくなり、自己遮蔽効果の影響により共鳴領域で捕獲反応が増加するために生じることを明かにした。

報告書

HTTR起動用中性子源用の輸送容器の開発

島崎 洋祐; 澤畑 洋明; 柳田 佳徳; 篠原 正憲; 川本 大樹; 高田 昌二

JAEA-Technology 2016-038, 36 Pages, 2017/02

JAEA-Technology-2016-038.pdf:8.75MB

HTTR(高温工学試験研究炉)では起動用中性子源として、$$^{252}$$Cf(3.7GBq$$times$$3個)を炉内に装荷し、約7年を目途に交換している。中性子源の中性子源ホルダへの装荷及び輸送物の製作は、販売業者のホットセル内で行われ、その後、HTTRまで輸送される。中性子源ホルダの制御棒案内ブロックからの取出・装荷は、HTTRのメンテナンスピット内で行う。前回までの中性子源交換作業において、輸送容器に係る中性子源ホルダの取扱い上のリスクとして以下が確認された。(1)作業員の被ばくのリスク、(2)中性子源ホルダの誤落下リスク。そこで、そのリスクを低減し、かつ、製造から20年経過した従来の輸送容器をオーバーホールして使用し続ける場合と同程度のコストで、従来の輸送容器と同じA型輸送物の基準を満足することができる、HTTRの中性子源専用の新たな輸送容器を製作した。

論文

Improvement of neutron startup source handling work by developing new transportation container for High-Temperature engineering Test Reactor (HTTR)

島崎 洋祐; 澤畑 洋明; 篠原 正憲; 柳田 佳徳; 川本 大樹; 高田 昌二

Journal of Nuclear Science and Technology, 54(2), p.260 - 266, 2017/02

 被引用回数:1 パーセンタイル:10.71(Nuclear Science & Technology)

HTTR(高温工学試験研究炉)では、起動用中性子源として小さなキャプセルに封入された$$^{252}$$Cf(3.7GBq)を3個炉内に装荷している。炉内黒鉛構造物の一つである制御棒案内ブロック内に中性子源入りの中性子源ホルダが装荷されており、約7年の頻度で交換している。中性子源入りの中性子源ホルダは輸送容器を使用して販売業者のホットセルからHTTR原子炉建家まで運搬される。中性子源ホルダの制御棒案内ブロックからの取出・装荷はHTTR原子炉建家内のメンテナンスピット内で行う。前回までの中性子源交換作業から、中性子源取扱作業の安全性向上を目的として輸送容器に係る2つの課題、作業者の被ばくリスク低減・予防及び中性子源ホルダの誤落下防止を抽出した。そして、これらの課題を解決できるHTTR起動用中性子源専用の輸送容器を従来の輸送容器のオーバーホールと同程度のコストで開発した。この結果、新たな輸送容器を使用して実施した中性子源の取扱作業は、安全に完遂された。

論文

Burn-up dependency of control rod position at zero-power criticality in the high-temperature engineering test reactor

本多 友貴; 藤本 望*; 澤畑 洋明; 高田 昌二; 沢 和弘

Journal of Nuclear Engineering and Radiation Science, 3(1), p.011013_1 - 011013_4, 2017/01

HTTRの燃焼挙動は今後の高温ガス炉開発において重要なデータである。現在までにHTTRを用いた様々な試験が行われており、解析精度の検証が行われてきたが燃焼を伴う解析精度の検証が不十分であった。また、現在のHTTRは燃焼中期にあり、十分なデータが取得されている。そこで本研究では、燃焼を伴う臨界制御棒位置のデータを用いて核解析コードの解析精度の検討を行った。しかしながら、定格試験データは炉内に温度分布があるため、誤差要因が多く検証が困難であった。対してHTTRでは試験ごとに400Kの低温臨界制御棒位置のデータを保有しており、また400K条件での試験データは温度分布が無く解析値と比較する上で良質なデータであるため、まずこれらのデータを用いて燃焼による拡散計算コードCITATIONによる解析精度の検討を行い十分な精度があることを確かめた。これにより、Sm, Puなどの蓄積評価が十分であることを確認した。これらのコードの検証により将来高温ガス炉のための技術基盤の確立を目指す。

論文

Study on sensitivity of control rod cell model in reflector region of high-temperature engineering test reactor

本多 友貴; 藤本 望*; 澤畑 洋明; 高田 昌二; 沢 和弘

Journal of Nuclear Engineering and Radiation Science, 3(1), p.011005_1 - 011005_6, 2017/01

HTTRでは制御棒二段階挿入方法を採用しており、1段目で反射体領域に制御棒を挿入し未臨界にする仕組みとなっている。また将来高温ガス炉においても反射体領域にのみ制御棒を挿入する設計が存在するため、1段目の反射体領域に挿入される制御棒の反応度の解析精度が重要となる。しかしながら、現在まで制御棒価値の高い燃料領域に挿入される制御棒に合わせてセルモデルを作成していたため、1段目の制御棒価値の解析精度が不十分であることが分かった。そこで1段目の制御棒を取り巻く状況に合わせて反射体領域断面積を作成することによる感度解析を行い、将来高温ガス炉の研究開発のための技術基盤の確立を目指す。

論文

Investigation of absorption characteristics for thermal-load fluctuation using HTTR

栃尾 大輔; 本多 友貴; 佐藤 博之; 関田 健司; 本間 史隆; 澤畑 洋明; 高田 昌二; 中川 繁昭

Journal of Nuclear Science and Technology, 54(1), p.13 - 21, 2017/01

 被引用回数:1 パーセンタイル:10.71(Nuclear Science & Technology)

原子力機構ではGTHTR300Cの設計研究を行っている。水素製造施設のような熱利用系において発生した異常による熱負荷の変動が発生した場合でも、原子炉システムは、安定かつ安全な運転、更に安定な電力供給を継続することが求められている。そのためには、熱負荷変動を原子炉システムで吸収でき、安定かつ安全な運転を継続できることを実証する必要がある。原子力機構では、原子炉及びIHXによる熱負荷変動吸収特性を明らかにするために、核熱を伴わない熱負荷変動吸収試験を計画・実施した。その結果、原子炉は予想より大きな吸収容量を有しており、IHXも熱利用系で発生した熱負荷変動を吸収できることを明らかにすることができた。このことから、原子炉及びIHXは、熱利用系で発生した熱負荷変動の有意な吸収容量を有していることを確認した。さらに、RELAP5/MOD3に基づいた安全評価コードは、熱負荷変動吸収挙動を保守的に評価できることを確認した。

131 件中 1件目~20件目を表示