Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sukegawa, Atsuhiko; Murakami, Haruyuki; Matsunaga, Go; Sakurai, Shinji; Takechi, Manabu; Yoshida, Kiyoshi; Ikeda, Yoshitaka
Fusion Engineering and Design, 98-99, p.2076 - 2079, 2015/10
Times Cited Count:2 Percentile:17.52(Nuclear Science & Technology)The JT-60SA project is a EU - JA satellite tokamak under Broader Approach in support of the ITER project. In-vessel coils are designed and assembled by JA. The resin-insulator is required to have a heat resistance against the baking temperature of vacuum vessel of 200C (40000 hour). Thus the assessment of the heat load is fundamental for the design of the coils. However, the estimation of the lifetime of resin-insulator under the high-temperature region has not been examined. In the present study, the estimation of the lifetime of seven candidate resin-insulators such as epoxy resin and cyanate-ester resin under the 220C temperature region have been performed for the current coils design. Weight reduction of the seven candidate insulators was measured at different heating times under 180C, 200C and 220C environment using three thermostatic ovens, respectively. The reduction of the insulators has been used as input for Weibull-analysis towards Arrhenius-plot. Lifetime of the resins has been estimated for the first time at the high temperature region by the plot. Lifetime of the resin-insulators have been evaluated and discussed as well as the available temperature of the in-vessel coils.
Nakahira, Masataka; Takeda, Nobukazu
Hozengaku, 4(4), p.47 - 52, 2006/01
The technical structural standard for ITER (International Thermonuclear Experimental Fusion Reactor) should be innovative because of their quite different features of safety and mechanical components from nuclear fission reactors, and the necessity of introducing several new fabrication and examination technologies. Recognizing the international importance of Fusion Standard, Japan and ASME has started the cooperation development of the Fusion Standard. This paper shows the special features of ITER from view points of safety, design and fabrication, and proposes approach for development of the fusion standard.