Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Imai, Yosuke*; Tokiwa, Yuhei*; Ueno, Shusaku*; Tanida, Hajime; Watanabe, Iwao*; Matsubara, Hiroki*; Takiue, Takanori*; Aratono, Makoto*
Bulletin of the Chemical Society of Japan, 91(10), p.1487 - 1494, 2018/10
Times Cited Count：2 Percentile：8.1(Chemistry, Multidisciplinary)Competitive binding of binary mixed counterions to the headgroups of adsorbed surfactant films has been investigated at solution surfaces by total reflection X-ray absorption fine structure (XAFS) spectroscopy. The obtained extended XAFS 
spectra for bromide counterions are linear combinations of the spectra of fully hydrated bromide ions (free Br) and partially dehydrated bromide ions bound to the headgroups of the surfactant ions (bound Br). From the fraction of bound Br in counterion mixed systems, two series of the relative strengths of counterion binding are proposed for the trimethylammonium (TA
) and 3-methylimidazolium (MIM) headgroups: (a) TA-SO
TA-Cl TA-Br TA-BF and (b) MIM-Br TA-Br TA-BF MIM-BF. For the TA headgroup, matching the hydration of the headgroups and counterions gives series (a) according to Collins' law, which states that the tendency of contact ion pair formation becomes larger when the absolute values of the hydration enthalpies of the ions match. For the MIM headgroup, the number of binding sites of hydrogen bonds between the MIM headgroup and counterion is essential, which leads to series (b) because of competition between the counterion and water for interaction with the MIM headgroup.
Yamamoto, Tomohiko; Kitamura, Seiji; Iwasaki, Akihisa*; Matsubara, Shinichiro*; Okamura, Shigeki*
Proceedings of 2017 ASME Pressure Vessels and Piping Conference (PVP 2017) (CD-ROM), 10 Pages, 2017/07
To design fast reactor (FR) components, seismic response must be evaluated in order to ensure structural integrity. Therefore, a sophisticated analysis method has to be developed to study the seismic response of FR core. The fast reactors are made of several hundred core assemblies in hexagonal arrangement. When a big earthquake occurs, large horizontal displacement and impact force of each core assembly may cause a trouble for control rod insertability and core assembly intensity. Therefore, a seismic analysis method of fast reactor core considering horizontal nonlinear behavior, such as impact, fluid-structure interaction, etc. is needed. Validation of the core assembly vibration analysis code in three dimension (REVIAN-3D) was conducted by a full scale experiment. In this validation, the vertical behavior (raising displacement) and horizontal behavior (Impact force, horizontal response) of the analysis result agreed very well with the experiments.
Aoyagi, Kazuhei; Kamemura, Katsumi*; Nago, Makito*; Sugawara, Kentaro*; Matsubara, Makoto*
Proceedings of ITA-AITES World Tunnel Congress 2017 (WTC 2017) (USB Flash Drive), 10 Pages, 2017/06
An in situ stress state is one of the important factors in the design of deep underground facility of high-level radioactive waste disposal repository. This study establishes a practical and effective method for estimating in situ stress state on the basis of the measured convergence during gallery excavation. The convergence was measured in various directions of the loop gallery at 350m depth of the Horonobe Underground Research Laboratory; this allows determination of the stress state corresponding to the rock mass deformation behavior in an approximately 120 m* 200 m area. To estimate in situ stress state around that area, a back analysis method considering the existence of faults and fractures around the gallery was developed. The analyzed results showed a good agreement with the trend of in situ stress state estimated from hydraulic fracturing method.
Kamemura, Katsumi*; Aoyagi, Kazuhei; Nago, Makito*; Sugawara, Kentaro*; Matsubara, Makoto*
Dai-14-Kai Iwa No Rikigaku Kokunai Shimpojiumu Koen Rombunshu (Internet), 6 Pages, 2017/01
In the design of deep underground structures such as high-level radioactive waste disposal repositories, the estimation of rock mass stress state is important as well as the estimation of mechanical characteristics of rock mass. This study establishes a practical and effective method for estimating in situ stress based on the convergence measurement results obtained during gallery construction of URL. The convergence was measured in various directions of the URL loop gallery at 350 m depth, and this will allow determination of the stress state over a large area using a back analysis method. In order to improve the accuracy of initial stress estimation, the relationship between convergence measurement results and geological situation of existing fractures were studied. The analysis results show good agreement with the in situ stress state results reported in previous studies and confirm the applicability of the proposed method.
Tomizawa, Hiromitsu*; Sato, Takahiro*; Ogawa, Kanade*; Togawa, Kazuaki*; Tanaka, Takatsugu*; Hara, Toru*; Yabashi, Makina*; Tanaka, Hitoshi*; Ishikawa, Tetsuya*; Togashi, Tadashi*; et al.
High Power Laser Science and Engineering, 3, p.e14_1 - e14_10, 2015/04
Times Cited Count：6 Percentile：34.26(Optics)no abstracts in English
Kato, Nobuyoshi*; Tsusaka, Kimikazu; Nago, Makito*; Yamagami, Masahito*; Matsubara, Makoto*; Shigehiro, Michiko*; Aizawa, Takao*; Kamemura, Katsumi*
Chishitsu To Chosa, (139), p.17 - 22, 2014/04
no abstracts in English
Sato, Takahiro*; Iwasaki, Atsushi*; Owada, Shigeki*; Yamanouchi, Kaoru*; Takahashi, Eiji*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; Togashi, Tadashi*; Fukami, Kenji*; et al.
Journal of Physics B; Atomic, Molecular and Optical Physics, 46(16), p.164006_1 - 164006_6, 2013/08
Times Cited Count：3 Percentile：18.98(Optics)By introducing 13th- (61.7 nm) and 15th-order harmonics (53.4 nm) of femtosecond laser pulses at 800 nm into an undulator of SCSS (SPring-8 Compact SASE Source) test accelerator at RIKEN, these harmonic pulses were amplified by a factor of more than 10
with a high contrast ratio through the interaction between accelerated electron bunches and the harmonic pulses. From numerical simulations of the amplification processes of high-order harmonic pulses in the undulator, optimum conditions of the electron bunch duration interacting with the high-order harmonic pulses were investigated for generating full-coherent and intense pulses in the extreme ultraviolet wavelength region.
Ogawa, Kanade*; Sato, Takahiro*; Matsubara, Shinichi*; Okayasu, Yuichi*; Togashi, Tadashi*; Watanabe, Takahiro*; Takahashi, Eiji*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; et al.
Proceedings of 10th Conference on Lasers and Electro-Optics Pacific Rim and 18th OptoElectronics and Communications Conference and Photonics in Switching 2013 (CLEO-PR & OECC/PS 2013) (USB Flash Drive), 2 Pages, 2013/06
no abstracts in English
Tsusaka, Kimikazu; Inagaki, Daisuke; Nago, Makito*; Kamemura, Katsumi*; Matsubara, Makoto*; Shigehiro, Michiko*
Proceedings of ITA-AITES World Tunnel Congress 2013 (WTC 2013)/39th General Assembly, p.2014 - 2021, 2013/05
Japan Atomic Energy Agency (JAEA) has been constructing three shafts to a depth of 500 m in the Horonobe Underground Research Laboratory Project. In this study, in consideration of support patterns installed, a relationship between the rock mass properties and mechanical response to excavation was investigated in detail during the construction of the East Access Shaft below a depth of 250 m. Since the shaft has intersected several faults with the size greater than the shaft diameter, some amounts of rock spalling have occurred and cracks have severely developed in a concrete lining in highly fractured zones. The results of pre-excavation grouting were compared with the results of fracture mapping in the shaft wall obtained during the shaft sinking. Applicability of several support patterns installed to control massive spalling during the shaft sinking was also analysed using the results of geometry profiling of shaft wall using a three-dimensional laser scanner and convergence measurements. As a result, based the empirical relationships among the characteristics of rocks, dimension of spalling, damage of a concrete lining and support patterns, a flow chart for selection of span of a concrete lining was proposed to control its severe damage prior to shaft excavation.
Togashi, Tadashi*; Takahashi, Eiji*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; Sato, Takahiro*; Iwasaki, Atsushi*; Owada, Shigeki*; Yamanouchi, Kaoru*; Hara, Toru*; et al.
Proceedings of Ultrafast Optics IX (CD-ROM), 2 Pages, 2013/03
We have demonstrated free-electron laser radiation seeded by high-order harmonics in the extreme-ultraviolet region. Strong enhancement of the radiation intensity by a factor of 104 was observed with timing control of an electro-optical sampling technique.
Tsusaka, Kimikazu; Inagaki, Daisuke; Nago, Makito*; Koike, Masashi*; Matsubara, Makoto*; Sugawara, Kentaro*
Dai-13-Kai Iwa No Rikigaku Kokunai Shimpojiumu Koen Rombunshu (CD-ROM), p.911 - 916, 2013/01
A repository for high-level radioactive waste in deep underground consists of several underground structures such as access and disposal drifts and shafts. In deep geological disposal project, a shaft is the first underground structure to be constructed and the last one to be backfilled. Therefore, the stability of shaft is one of key factors to steadily manage the project in the construction and operation phases. In this paper, the authors discuss influence of rock spalling on concrete lining in shaft sinking. Japan Atomic Energy Agency has been constructing three shafts (one is for ventilation and the others are for access use) up to a depth of 500 m in the Horonobe Underground Research Laboratory. During the construction of the Ventilation Shaft (4.5 m in diameter) below a depth of 250 m, rock spalling occurred at several depths and an open crack has developed in a concrete lining installed just above rock spalling. The authors have measured geometry of shaft wall by using three-dimensional laser scanner. They also conducted numerical analysis in order to calculate change in stress distribution and deformation induced by rock spalling in a concrete lining and the surrounding rock. As a result, it was clarified that rock spalling induced tensile stress in the vertical direction in a concrete lining. Especially, the tensile stress in a concrete lining was likely to exceed tensile strength of a concrete lining in the case that it developed more than 100 cm in depth.
Tokiwa, Tetsuya; Tsusaka, Kimikazu; Matsubara, Makoto*; Ishikawa, Taiki*; Ogawa, Daisuke*
Geoscience Frontiers, 4(1), p.105 - 111, 2013/01
Times Cited Count：8 Percentile：23.5(Geosciences, Multidisciplinary)This paper focuses on the formation mechanism of fractures induced by excavation of a gallery in soft sedimentary rocks in the Horonobe area of Japan. Detailed fracture mapping of the gallery indicates that the fractures consist of both pre-existing fractures (shear fractures) and EDZ fractures (extension fractures). EDZ fractures correspond to bedding planes or potential joints inferred by paleo-stress field, and the EDZ fractures terminate against pre-existing fractures. Therefore, even for excavations in soft sedimentary rocks, formation of the EDZ fractures are controlled by pre-existing fractures and weakness planes associated with bedding planes and potential joints.
Okayasu, Yuichi*; Tomizawa, Hiromitsu*; Matsubara, Shinichi*; Sato, Takahiro*; Ogawa, Kanade*; Togashi, Tadashi*; Takahashi, Eiji*; Minamide, Hiroaki*; Matsukawa, Ken*; Aoyama, Makoto; et al.
Proceedings of 1st International Beam Instrumentation Conference (IBIC 2012) (Internet), 5 Pages, 2012/10
no abstracts in English
Iwasaki, Atsushi*; Sato, Takahiro*; Owada, Shigeki*; Togashi, Tadashi*; Takahashi, Eiji*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; Matsubara, Shinichi*; Okayasu, Yuichi*; et al.
Proceedings of International Conference on Ultrafast Phenomena 2012 (UP 2012) (Internet), 3 Pages, 2012/07
Times Cited Count：0 Percentile：0.03(Physics, Multidisciplinary)no abstracts in English
Togashi, Tadashi*; Takahashi, Eiji*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; Sato, Takahiro*; Iwasaki, Atsushi*; Owada, Shigeki*; Yamanouchi, Kaoru*; Hara, Toru*; et al.
Proceedings of 11th International School and Symposium on Synchrotron Radiation in Natural Science (ISSRNS 2012), p.1 - 21, 2012/05
The 13th harmonic of a Ti:sapphire laser has been significantly amplified with the SCSS test accelerator. The temporal and spatial overlap of the electron beam and the high harmonic radiation were precisely tuned for achieving the seeded free electron laser operation. With numerical simulation the present HH-seeded FEL scheme could readily be applied to the wavelength region down to 10 nm.
Tsusaka, Kimikazu; Inagaki, Daisuke; Tokiwa, Tetsuya; Yokota, Hideharu; Nago, Makito*; Matsubara, Makoto*; Shigehiro, Michiko*
Proceedings of ITA-AITES World Tunnel Congress 2012 (WTC 2012)/38th General Assembly (CD-ROM), 8 Pages, 2012/05
In the Horonobe URL Project, three shafts are planned to be excavated up to the depth of 500 m in the Neogene sedimentary rocks. The host rock of the URL site is comprised of diatomaceous and siliceous mudstones, which are the Koetoi and Wakkanai Formations, respectively. Approximately 100 m thick fracture zone with high hydraulic conductivity develops above about 400 m in depth in the Wakkanai Formation. The shaft sinking through the fracture zone is the most challenging issue from the aspect of tunnel engineering in the project. In the fracture zone, there is high possibility of severe breakout and spalling in shaft wall because the shafts might be intersecting faults with the size greater than shaft diameter in addition to low intact rock strength at great depth. In practice, prior to the construction of the Ventilation Shaft through the fracture zone below a depth of 250 m, the three dimensional fault distribution were predicted by integrating borehole investigation results and geological response to pre-excavation grouting operation. The countermeasure was also designed against massive spalling. During the shaft sinking, fracture mapping of shaft wall was carried out in order to evaluate the prediction of fault distribution. Roughness of shaft wall was also measured by three dimensional laser scanner in order to investigate the shape and volume of spalling resulting from the excavation work. Consequently, the Ventilation Shaft has successfully been constructed through the fracture zone. This is because the prediction of fault distribution was accurate, and the countermeasure against concrete lining damage due to spalling was promptly applied.
Tsusaka, Kimikazu; Inagaki, Daisuke; Nago, Makito*; Matsubara, Makoto*
Chika Kukan Shimpojiumu, Rombunshu, 17, p.155 - 162, 2012/01
Japan Atomic Energy Agency has been constructing an underground research laboratory in order to enhance the reliability of relevant disposal technologies of high-level radioactive waste in Horonobe, Hokkaido. A ventilation shaft (4.5 m in diameter) and two access shafts (6.5 m in diameter) are being excavated through the Neogene sedimentary rocks until the depth of 500 m. Based on the results of borehole investigation and pre-grounting operation in bedrock with high permeability from 250 m to 375 m in depth, the three dimensional fracture distribution map were built and the locations with high possibility of spalling in shaft wall in response to excavation were predicted prior to the shaft sinking from a depth of 250 m. Some amounts of spalling has occurred in several depths during shaft sinking from 250 m to 280 m in depth. The shape of each spalling was measured by means of three dimensional laser scaning system. As a result, spalling in shaft wall occurred along the faults predicted based on the three dimensional fracture distribution. In addition, spalling by brittle failure in shaft wall was also observed with a few extensile fractures which were expected to be induced by excavation. Based on the shape of spalling, it was confirmed that the applied shaft sinking procedure properly prevented a massive spalling.
Takahashi, Eiji*; Togashi, Tadashi*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; Sato, Takahiro*; Iwasaki, Atsushi*; Owada, Shigeki*; Yamanouchi, Kaoru*; Hara, Toru*; et al.
Proceedings of European Conference on Lasers and Electro-Optics and the 12th European Quantum Electronics Conference (CLEO/Europe-EQEC 2011) (CD-ROM), 1 Pages, 2011/05
We succeeded in generating the seeded free electron laser (FEL) with wavelengths of 61 nm at the SCSS test accelerator. The 13th (61 nm) harmonics generated by focusing the high peak power Ti:Sapphire laser to the Xe gas cell was directed to the undulator. This is first realization of the seeded FEL in extreme ultraviolet region.
Takahashi, Eiji*; Togashi, Tadashi*; Aoyama, Makoto; Yamakawa, Koichi; Sato, Takahiro*; Iwasaki, Atsushi*; Owada, Shigeki*; Yamanouchi, Kaoru*; Hara, Toru*; Matsubara, Shinichi*; et al.
Proceedings of International Quantum Electronics Conference and the Pacific Rim Conference on Lasers and Electro-Optics (IQEC/CLEO Pacific Rim 2011) (CD-ROM), p.199 - 200, 2011/05
We succeeded in generating the seeded free electron laser (FEL) with wavelengths of 61 nm at the SCSS test accelerator. The 13th (61 nm) harmonics generated by focusing the high peak power Ti:Sapphire laser to the Xe gas cell was directed to the undulator. This is first realization of the seeded FEL in extreme ultraviolet region.
Togashi, Tadashi*; Takahashi, Eiji*; Midorikawa, Katsumi*; Aoyama, Makoto; Yamakawa, Koichi; Sato, Takahiro*; Iwasaki, Atsushi*; Owada, Shigeki*; Okino, Tomoya*; Yamanouchi, Kaoru*; et al.
Optics Express (Internet), 19(1), p.317 - 324, 2011/01
Times Cited Count：96 Percentile：96.43(Optics)The 13th harmonic of a Ti:sapphire (Ti:S) laser in the plateau region was injected as a seeding source to a 250-MeV free-electron-laser (FEL) amplifier. When the amplification conditions were fulfilled, strong enhancement of the radiation intensity by a factor of 650 was observed. The random and uncontrollable spikes, which appeared in the spectra of the Self-Amplified Spontaneous Emission (SASE) based FEL radiation without the seeding source, were found to be suppressed drastically to form to a narrow-band, single peak profile at 61.2 nm. The properties of the seeded FEL radiation were well reproduced by numerical simulations. We discuss the future precept of the seeded FEL scheme to the shorter wavelength region.
