Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Sakurai, Hirohisa*; Kurebayashi, Yutaka*; Suzuki, Soichiro*; Horiuchi, Kazuho*; Takahashi, Yui*; Doshita, Norihiro*; Kikuchi, Satoshi*; Tokanai, Fuyuki*; Iwata, Naoyoshi*; Tajima, Yasushi*; et al.
Physical Review D, 109(10), p.102005_1 - 102005_18, 2024/05
Secular variations of galactic cosmic rays (GCRs) are inseparably associated with the galactic activities and should reflect the environments of the local galactic magnetic field, interstellar clouds, and nearby supernova remnants. The high-energy muons produced in the atmosphere by high-energy GCRs can penetrate deep underground and generate radioisotopes in the rock. As long lived radionuclides such as Be and Al have been accumulating in these rocks, concentrations of Be and Al can be used to estimate the long-term variations in high-energy muon yields, corresponding to those in the high-energy GCRs over a few million years. This study measured the production cross sections for muon induced Be and Al by irradiating positive muons with the momentum of 160 GeV/c on the synthetic silica plates and the granite core at the COMPASS experiment line in CERN SPS. In addition, it the contributions of the direct muon spallation reaction and the nuclear reactions by muon-induced particles on the production of long lived radionuclides in the rocks were clarified.
Miura, Yasufumi*; Suzuki, Kenji*; Morooka, Satoshi; Shobu, Takahisa
Quantum Beam Science (Internet), 8(1), p.1_1 - 1_14, 2024/03
Ishida, Takekazu*; Vu, TheDang*; Shishido, Hiroaki*; Aizawa, Kazuya; Oku, Takayuki; Oikawa, Kenichi; Harada, Masahide; Kojima, Kenji M*; Miyajima, Shigeyuki*; Koyama, Tomio*; et al.
Journal of Low Temperature Physics, 214(3-4), p.152 - 157, 2024/02
Times Cited Count:0 Percentile:0.01(Physics, Applied)Morimoto, Kyoichi; Ono, Takahiro; Kakutani, Satomi; Yoshida, Moeka; Suzuki, Soichiro
Journal of Robotics and Mechatronics, 36(1), p.125 - 133, 2024/02
The Naraha Center for Remote Control Technology Development was established for the purpose of developing and verifying remote control equipment for promoting the decommissioning of the Fukushima Daiichi Nuclear Power Station and the external use of this center was started in 2016. The mission of this center is to contribute to the decommissioning of the Fukushima Daiichi Nuclear Power Station and for the reconstruction of Fukushima Prefecture. In this review, we describe the equipment related to the full-scale mock-up test, the component test for a remote-control device and the virtual reality system in this center. In addition, the case examples for usage of these equipment are introduced.
Shishido, Hiroaki*; Vu, TheDang*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; Miyajima, Shigeyuki*; et al.
Journal of Applied Crystallography, 56(4), p.1108 - 1113, 2023/08
Times Cited Count:0 Percentile:0.02(Chemistry, Multidisciplinary)Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; Gmez-Ramos, M.*; Ogata, Kazuyuki*; Yoshida, Kazuki; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.
Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04
Times Cited Count:5 Percentile:91.26(Physics, Multidisciplinary)We report on the first proton-induced single proton- and neutron-removal reactions from the neutron deficient O nucleus with large Fermi-surface asymmetry at 100 MeV/nucleon. Our results provide the first quantitative contributions of multiple reaction mechanisms including the quasifree knockout, inelastic scattering, and nucleon transfer processes. It is shown that the inelastic scattering and nucleon transfer, usually neglected at such energy regime, contribute about 50% and 30% to the loosely bound proton and deeply bound neutron removal, respectively.
Suzuki, Kenji*; Miura, Yasufumi*; Shiro, Ayumi*; Toyokawa, Hidenori*; Saji, Choji*; Shobu, Takahisa; Morooka, Satoshi
Zairyo, 72(4), p.316 - 323, 2023/04
Yuguchi, Takashi*; Ito, Daichi*; Yokoyama, Tatsunori; Sakata, Shuhei*; Suzuki, Satoshi*; Ogita, Yasuhiro; Yagi, Koshi*; Imura, Takumi*; Motai, Satoko*; Ono, Takeshi*
Lithos, 440-441, p.107026_1 - 107026_14, 2023/03
Times Cited Count:0 Percentile:0.02(Geochemistry & Geophysics)We propose a new method for elucidating zircon growth in granitic plutons, based on variations in three-dimensional 3D cathodoluminescence (CL) patterns, U-Pb ages, titanium concentration, and Th/U ratios. We focused on the zircon growth processes in the Okueyama granite (OKG) in central Kyushu, Japan, to obtain interpretations of magma chamber processes that result in the formation of granitic plutons. The OKG consists of three lithofacies: biotite granite (BG), hornblende granite (HG), and hornblende granodiorite (HGD). To determine the 3D internal structure and growth pattern of a zircon crystal, we performed CL observations for multi-sections of the samples. Simultaneously, we also determined the zircon U-Pb age and titanium concentration of the center sections of the samples. The 3D distribution of the oscillatory zoning can be used to determine the crystal nucleus. The simultaneous determination of zircon U-Pb ages and Ti concentrations of the granite samples indicates the time-temperature (t-T) history of granitic magma before its solidification. The t-T histories of the BG, HG, and HGD represented similar cooling behaviors within the magma chamber: rapid cooling from the zircon crystallization temperature to the closure temperature of the biotite K-Ar system between 16 Ma and 10 Ma. The variations in the Th/U ratios against temperature also demonstrate a different trend at the boundary of approximately 670 C. Fractional crystallization in the magma chamber progressed significantly at temperatures above 670 C; below 670 C, crystallization progressed slowly, indicating only minimal changes in the magma composition. The variations in the Th/U ratio against temperature in the BG, HG, and HGD portrayed common tendencies, indicating the same behavior in the progression of fractional crystallization among the three lithofacies, which in turn, represented the same behavior within the entire magma chamber.
Fujiyama, Hiroki*; Takahashi, Hiroki; Okabe, Kota; Ito, Yuichi*; Hatakeyama, Shuichiro; Suzuki, Takahiro*; Otsu, Satoru*; Yamakawa, Ryuto*
Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.529 - 531, 2023/01
Stepper motors are used for mechanical drive in collimators and wire scanner monitors of J-PARC accelerators. Many of these drive unit hardware have been used since the beginning of J-PARC construction, and it is necessary to take measures against aging deterioration. Therefore, we started updating the motor and control system from around 2017. However, when the stepper motor was updated to the current product in the RCS H0 collimator, a malfunction occurred. This is because the drive unit control system cannot correctly recognize the state of the LS (limit switch) due to the noise generated by the motor driver, which hinders the operation. When the noise generated from the old and new stepper motors was measured in a simple test environment for confirmation, it was found that the current product was clearly larger. As a countermeasure, when the wiring of the stepper motor, which was bundled in a single multi-core cable, was separated into separate cables for the power system and LS signal system, the noise level was reduced to about 1/10 and normal operation was restored. I was able to. In this case, we report on noise countermeasures for the RCS H0 collimator drive unit.
Oba, Yojiro; Morooka, Satoshi; Oishi, Kazuki*; Suzuki, Junichi*; Tsuchiyama, Toshihiro*
ISIJ International, 62(1), p.173 - 178, 2022/01
Times Cited Count:3 Percentile:40.92(Metallurgy & Metallurgical Engineering)Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; et al.
IEEE Transactions on Applied Superconductivity, 31(9), p.2400505_1 - 2400505_5, 2021/12
Times Cited Count:0 Percentile:0(Engineering, Electrical & Electronic)In this study, we employed a superconducting detector, current-biased kinetic-inductance detector (CB-KID) for neutron imaging using a pulsed neutron source. We employed the delay-line method, and high spatial resolution imaging with only four reading channels was achieved. We also performed wavelength-resolved neutron imaging by the time-of-flight method. We obtained the neutron transmission images of a Gd-Al alloy sample, inside which single crystals of GdAl were grown, using the delay-line CB-KID. Single crystals were well imaged, in both shapes and distributions, throughout the Al-Gd alloy. We identified Gd nuclei via neutron transmissions that exhibited characteristic suppression above the neutron wavelength of 0.03 nm. In addition, the Gd resonance dip, a dip structure of the transmission caused by the nuclear reaction between an isotope and neutrons, was observed even when the number of events was summed over a limited area of 15 m 12 m. Gd selective imaging was performed using the resonance dip of Gd, and it showed clear Gd distribution even with a limited neutron wavelength range of 1 pm.
Vu, TheDang; Shishido, Hiroaki*; Aizawa, Kazuya; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Oku, Takayuki; Soyama, Kazuhiko; Miyajima, Shigeyuki*; et al.
Nuclear Instruments and Methods in Physics Research A, 1006, p.165411_1 - 165411_8, 2021/08
Times Cited Count:1 Percentile:17.58(Instruments & Instrumentation)Kitazato, Kohei*; Milliken, R. E.*; Iwata, Takahiro*; Abe, Masanao*; Otake, Makiko*; Matsuura, Shuji*; Takagi, Yasuhiko*; Nakamura, Tomoki*; Hiroi, Takahiro*; Matsuoka, Moe*; et al.
Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03
Times Cited Count:44 Percentile:96.99(Astronomy & Astrophysics)Here we report observations of Ryugu's subsurface material by the Near-Infrared Spectrometer (NIRS3) on the Hayabusa2 spacecraft. Reflectance spectra of excavated material exhibit a hydroxyl (OH) absorption feature that is slightly stronger and peak-shifted compared with that observed for the surface, indicating that space weathering and/or radiative heating have caused subtle spectral changes in the uppermost surface. However, the strength and shape of the OH feature still suggests that the subsurface material experienced heating above 300 C, similar to the surface. In contrast, thermophysical modeling indicates that radiative heating does not increase the temperature above 200 C at the estimated excavation depth of 1 m, even if the semimajor axis is reduced to 0.344 au. This supports the hypothesis that primary thermal alteration occurred due to radiogenic and/or impact heating on Ryugu's parent body.
Hikima, Kazuhiro*; Hinuma, Yoyo*; Shimizu, Keisuke*; Suzuki, Kota*; Taminato, So*; Hirayama, Masaaki*; Masuda, Takuya*; Tamura, Kazuhisa; Kanno, Ryoji*
ACS Applied Materials & Interfaces, 13(6), p.7650 - 7663, 2021/02
Times Cited Count:12 Percentile:65.55(Nanoscience & Nanotechnology)We evaluated the structural change of the cathode material LiMnO that was deposited as an epitaxial film with an (001) orientation in an all-solid-state battery. In case of the electrode with LiPO coating. Experiments revealed a structural change to a high-capacity (activated) phase that proceeded gradually and continuously with cycling. The activated phase barely showed any capacity fading. We propose a mechanism of structural change with cycling: charging to a high voltage at a sufficiently low Li concentration typically induces irreversible transition to a phase detrimental to cycling that could, but not necessarily, be accompanied by the dissolution of Mn and/or the release of O into the electrolyte, while a gradual irreversible transition to an activated phase happens at a similar Li concentration under a lower voltage.
Vu, TheDang; Shishido, Hiroaki*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Oku, Takayuki; Soyama, Kazuhiko; Aizawa, Kazuya; et al.
Superconductor Science and Technology, 34(1), p.015010_1 - 015010_10, 2021/01
Times Cited Count:3 Percentile:25.71(Physics, Applied)Jee, H.*; Im, S.*; Kanematsu, Manabu*; Suzuki, Hiroshi; Morooka, Satoshi; Koyama, Taku*; Machida, Akihiko*; Bae, S.*
Journal of the American Ceramic Society, 103(12), p.7188 - 7201, 2020/12
Times Cited Count:14 Percentile:63.82(Materials Science, Ceramics)Tsunoda, Naofumi*; Otsuka, Takaharu; Takayanagi, Kazuo*; Shimizu, Noritaka*; Suzuki, Toshio*; Utsuno, Yutaka; Yoshida, Sota*; Ueno, Hideki*
Nature, 587, p.66 - 71, 2020/11
Times Cited Count:42 Percentile:93.04(Multidisciplinary Sciences)no abstracts in English
Shishido, Hiroaki*; Nishimura, Kazuma*; Vu, TheDang*; Kojima, Kenji M*; Koyama, Tomio*; Oikawa, Kenichi; Harada, Masahide; Miyajima, Shigeyuki*; Hidaka, Mutsuo*; Oku, Takayuki; et al.
Journal of Physics; Conference Series, 1590, p.012033_1 - 012033_8, 2020/10
Times Cited Count:0 Percentile:0.01(Engineering, Electrical & Electronic)Suzuki, Takayuki*; Yoshida, Hiroyuki; Horiguchi, Naoki; Yamamura, Sota*; Abe, Yutaka*
Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 7 Pages, 2020/08
Kuroda, Kenta*; Arai, Yosuke*; Rezaei, N.*; Kunisada, So*; Sakuragi, Shunsuke*; Alaei, M.*; Kinoshita, Yuto*; Bareille, C.*; Noguchi, Ryo*; Nakayama, Mitsuhiro*; et al.
Nature Communications (Internet), 11, p.2888_1 - 2888_9, 2020/06
Times Cited Count:21 Percentile:75.52(Multidisciplinary Sciences)