Development of alumina ceramics vacuum duct for the 3GeV-RCS of the J-PARC project
J-PARC 3eV-RCS用アルミナセラミックス真空ダクトの開発
金正 倫計 ; 齊藤 芳男*; 壁谷 善三郎*; 田尻 桂介*; 中村 止*; 阿部 和彦*; 長山 毅俊*; 西澤 代治*; 荻原 徳男
Kinsho, Michikazu; Saito, Yoshio*; Kabeya, Zenzaburo*; Tajiri, Keisuke*; Nakamura, Tomaru*; Abe, Kazuhiko*; Nagayama, Taketoshi*; Nishizawa, Daiji*; Ogiwara, Norio
J-PARC 3GeV-RCS用アルミナセラミックス真空ダクトの開発を行っている。このダクトは、四極電磁石用として使用される長さ約1.5m円形断面の円筒形状のものと、偏向電磁石用として使用される長さ約3.5mレーストラック形断面の15度湾曲した形状のものに大別される。これらダクトは、長さ0.5-0.8mのユニットダクトをメタライズ後ロウ付けにより必要な長さに成形される。このダクトの最大の特徴は、ビームが誘起する電磁波を遮蔽し、さらにビームが誘起する映像電流を円滑に流すために、ダクト表面に銅箔を電鋳により施している。また、内面には二次電子を抑制するために、TiNコーテイングを施してある。今回、開発に成功したので報告を行う。
Alimina ceramics vacuum duct has been developing at JAERI for the 3GeV-RCS of the J-PARC project. There are two type of the alumina ceramics vacuum ducts, one is a 1.5m-long duct with a circular cross section for use in the quadrupole magnet, the other is a 3.5m-long being bending 15 degree with an elliptical cross section for use in the dipole magnet.These ducts could be manufactured by brazed jointing several duct segments of 0.5-0.8 m long. Since some electrically conductive boundary is necessary to form on the ceramics duct in order to reduce the duct impedance, the alumina ceramics ducts have copper stripes on the outside surface of the ducts. This is called for rf shielding system. The copper stripes as rf shielding is produced by an electroforming method. In order to reduce emitting secondary electrons when primary protons or electrons impinge onto the surface, TiN film is coated inside surface of the alumina ceramics duct.