検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

600MWt級高温ガス炉ガスタービンシステム内高温ヘリウムガス冷却材中のFP化合物生成とエアロゾル-凝縮メカニズムによるFPプレートアウト現象に関する解析試験

FP plate-out and compound formation analysis in hot helium coolant of 600MWt GTHTR300 system by FP concentration difference diffusion and aerosol-condensation mechanism

石山 新太郎

Ishiyama, Shintaro

600MWt級GTHRT300プラントにおけるガスタービンをはじめとするメンテナンス主要機器におけるFP沈着量並びに放射線作業被曝量評価を行うため、FP化合物生成並びにFP濃度差拡散・行術メカニズムによるFPプレートアウト解析を実施した。その結果、(1)模擬FPプレートアウト試験においてVICTORIAコードにおいて適当な反応層厚みを仮定することにより、解析解と実験値とに良い一致が得られた。(2)GTHTR300のガスタービン部における全線量当量及び作業可能時間はそれぞれ19.2mSv/hと2.6時間がVICTORIAコード解析の結果得られた。

To estimate FP deposition rate on the typical turbomachinary including gas turbin of GTHTR300 and exposure dose limit at its maintenance, FP plate-out analysis was been carried out using FP compound formation theory and FP concentration controlled diffusion mechanisum. As the results, following conclusions were derived. (1) It is found that the analysis data computed by the VICTORIA code with assumption of the correct thickness of reactive zone exhibits very good correiation with the experimental data obtained by simulated FP plate-out experiment. (2) Total dose rate and allowable work time at turbin of GTHTR300 are given as 19.2mSv/h and 2.6hours by VICTORIA code analysis.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.