もんじゅ2次系床ライナの機械的健全性について

Mechanical integrity of floor liner in secondary heat transport system cells of Monju

一宮 正和; 堂崎 浩二; 上野 文義  ; 森下 正樹 ; 小林 孝良; 奥田 英一; 嵐田 源二

not registered; not registered; Ueno, Fumiyoshi; not registered; not registered; not registered; not registered

もんじゅ2次系床ライナについて、漏えいナトリウムの燃焼による熱荷重条件に対するライナの機械的健全性を、溶解塩型腐食による減肉を考慮したうえで、非弾性解析及び部分構造模擬試験により評価した。非弾性解析の結果、減肉が著しく進行しても、ライナに生じるひずみ値は材料固有の延性限度内にあるため、ライナに貫通性損傷が発生することはなく、その機械的健全性が確保されることを確認した。また、部分構造模擬試験の結果、非弾性解析による推定値を大幅に上回るひずみを与えても損通性損傷はなく、機械的健全性を維持することを確認した。

Inelastic analyses of the floor liner subjected to thermal loading due to sodium leakage and combustion were carried out, considering thinning of the liner plate due to molten salt type corrosion. Because the inelastic strain obtained by the analyses stayed below the ductility limit of the material, mechanical integrity, i.e., there exist no through-wall crack on the floor liner, was confirmed. Partial structural model tests were conducted, with a band of local thinning of the liner plate. Displacements were controlled to give specimens much larger strains than those obtained by the inelastic analyses above. No through-wall crack was observed by these tests. Mechanical integrity of the floor liner was confirmed by these results of the inelastic analyses and the partial structural model tests.