検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

大規模ナトリウム漏洩燃焼試験(IV); 空気雰囲気中における模擬配管からのナトリウム漏洩燃焼試験、RUN-E2)

Large-scale test on sodium leak and fire (IV); Test of sodium leak and fire using simulated piping; Run-E2

森井 正*; 福地 平*; 山田 敏雄*

Morii, Tadashi*; not registered; not registered

〔目的〕 Na配管破損時に漏洩Naが、配管まわりの保温構造のために、スプレー状に噴出飛散しないことを工学的に実証する。〔方法〕「もんじゅ」2次系Na配管の1/3.5縮尺模擬配管試験体に、1/4・Dt相当の破損孔を上向きに設け、同2次系ホットレグ配管の系統圧3.8㎏/†-gと同じ圧力をかけてNaを漏洩させた。〔結果〕配管まわりの保温構造は、事故時のNa漏洩・燃焼によってもその健全性が損なわれることはなく充分に漏洩Naのスプレー状飛散を防止出来ることを実証した。また、漏洩中のNa燃焼速度は、漏洩Na流量の約4%程度であった。以前に実施した完全なスプレー状Na燃焼試験ではこの値が約30%であったのに比較すると、実機配管からの現実的なNa漏洩の際の燃焼は、スプレー燃焼と比べて穏やかである。〔結論〕配管保温構造は、想定Na漏洩事故時にも崩壊することなく、漏洩Naのスプレ状噴出飛散を防止する機能を有していることを実証した。この時の燃焼形態は棒状であり、スプレー状燃焼に比べて、燃焼速度は小さいことを明らかにした。

A test, Run-E2, of sodium leak from a 1/3.5 scale simulated Na piping of the secondary circuit of Monju was conducted using the SOLFA-2 in the SAPFIRE facilities. In the simulated piping, a leak hole with an area reduced by (1/3.5)$$^{2}$$ from an area of 1/4$$cdot$$Dt of the actual piping was made on the upper wall of the piping in advance. In the test, a pressure equal to the system pressure of 3.8 kg/cm$$^{2}$$$$cdot$$g of the hot leg piping in secondary circuit of the actual plant was applied, and sodium was spilled. Spill duration was approximately 13 minutes. The test results showed that the integrity of the insulation structure around the piping will not be broken by a Na Pressure and combustion heat during an accident, therefore, the spray leakage of Na can be fully prevented. Moreover, burning rate of Na during leakage was approximately 4% of the flow rate of the Na leak. Compared to about 30% obtained from the spray combustion test conducted previously using a spray nozzle, the combustion following a realistic Na Leak from the actual piping is found to be milder than that of spray combustion.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.