検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

炉内音響検出試験実施のための解析作業 燃料ピンのモデル化と音源位置同定の検討

Analytical study for the in-vessel acoustic detection test investigation of modeling of fuel-pins and positioning of soundsource

鈴木 篤彦*; 唐沢 博一*; 塩山 勉*; 小舞 正文*

not registered; not registered; not registered; not registered

高速増殖炉原子炉内ナトリウム中において沸騰音を検出するための炉内音響検出計の成立性の評価のため、音源重量法を用いた解析コード(SOSUM)により、集合体内部及び炉心上部での音響伝播解析を行った。平成8年度は、解析モデルとして、燃料集合体・炉内構造物のモデル化を行い、炉心中心からの沸騰音等の異常音の炉内伝播状態について燃料集合体内とプレナム部の音響伝播の2段階に分けて解析を実施した。平成9年度は、燃料ピンの音響伝播への影響を確認するため、ワイヤをモデル化して集合体内部及び炉心上部での音響伝播を解析した。音響伝播解析では解析を合理化するため、双極子モデルを採用した。また、開口合成手法を用いて音源となっている燃料集合体位置を同定する手法についても検討を行った。本解析結果により、燃料ピンに巻かれたワイヤーの音響伝播への影響は最大6%程度と小さいことが分かった。また、開口合成による音源燃料集合体位置の同定では4点程度の計測点があれば十分同定が可能であることが分かった。

Feasibility of a in-vessel acoustic detection system, which is used to detect boiling noise of sodium in a reactor vessel of FBR, was evaluated by means of SOSUM (Sound source Super-imposed Method) code. In 1997 Fy propagation of abnormal sound (ex, boiling noise) was evaluated. In 1998 Fy, detail simulation model in which fuel pins with wire are involved, was evaluated. In order to reduce calculation time, dipole model was adopted in the simulation. Adequacy of the dipole simulation model was confirmed by comparison with the simulated result acquired by normal elements division model. With the result of this study, difference of propagation was less than about 6 %,. and detecting sound source's position in reactor vessel was evaluated to be possible by Synthetic Aperture Focusing Technique with about 4 detecting points.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.