検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

大電流電子線加速器の開発

Development of the high current electron accelerator

野村 昌弘  ; 遠山 伸一  ; 田中 拓; 武井 早憲   ; 山崎 良雄 ; 平野 耕一郎  ; 大村 明子

Nomura, Masahiro; Toyama, Shinichi; not registered; not registered; Yamazaki, Yoshio; Hirano, Koichiro; Omura, Akiko

昭和63年10月に原子力委員会・放射性廃棄物対策専門部会で策定された「群分離・消滅処理研究技術研究開発長期計画(通称:「オメガ計画」)」に沿って、大洗工学センターでは、その計画の一部である「電子線加速器による消滅処理」の研究を実施してきた。これは、電子線加速器で作られる高エネルギーガンマ線を用いて光核反応によりセシウム、ストロンチウム等の放射性核分裂生成物を安定な核種に変換する研究であるが、この消滅処理研究を工学的な規模で実施するためには100mA-100MeV(ビーム出力10MW)級の電子線加速器が必要であると推定され、「オメガ計画」の第1期の課題である大電流電子線加速器のビーム安定化等に関する要素技術の開発として20mA-10MeV(ビーム出力200kW)を開発目標として大電流電子線加速器の開発を行ってきた。本電子線加速器は、平成2年度から高エネルギー物理学研究所、放射線医学総合研究所、大学等の協力を得て技術開発に着手、平成5年度から大電流電子線加速器の製作を開始した。その後、加速器の心臓部とも言える入射部系が完成し、性能試験を平成8年3月から9月にかけて実施した。平成9年3月には本加速器の主要設備全ての据付けが完了したが、サイクル機構の諸事情等もあり、大幅に遅れ平成11年1月から性能確認のための加速器運転を開始、平成11年12月まで継続してきた。試験結果としては、まだ開発途中であり、長時間・安定に至っていないが、ビーム出力約14kWを達成した。また、短時間であるが、ビーム出力約40kWの運転も可能とした。本報告書では、サイクル機構で開発してきた大電流電子線加速器の開発を開始当時まで振り返って、開発の経緯、要素機器の開発、設備・機器の設計、加速器の性能確認試験等の事項について、総括的にまとめた。

According to the Long-Term Program for Partitioning and Transmutation which was published by the Atomic Energy Commission in 1988, study on the transmutation using an electron accelerator, which was a part of the program, has been carried out in the O-arai Engineering Center. It is the study on converting radioactive fission products for example Strontium and Cesium to stable nuclides by photonuclear reaction caused by high energy gamma-ray made by an electron accelerator. It was thought that a 100mA-100MeV (10MW output power) accelerator would be needed in order to carry out the transmutation study in engineering phase. Therefore, development of the High-Current Electron Accelerator whose target had been 20mA-10MeV (200 kW output power) accelerator was carried out as development of elemental technologies on beam stabilization. The conceptual design of the accelerator was started in 1989. In March 1997, the main facility of this accelerator was completed. The test operation was carried out to confiim the performance of the accelerator from January, 1999 to December. As the result, an output of about 14 kW was achieved. In addition, the electron beam of 40 kW could be to accelerate in short time. In this report, the design, fabrication and evalution of performance of the facilities are presented.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.