検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

レーザ除染技術の開発(6) (ノーマルパルスYAGレーザを用いた除染試験)

Development of laser decontamination technique (VI); Normal pulse laser decontamination test

福井 康太 ; 小川 竜一郎; 近藤 等士; 谷本 健一

Fukui, Yasutaka; not registered; Kondo, Hitoshi; Tanimoto, Kenichi

物質表面にレーザ光線を照射することにより、表面を急速に加熱して、溶融、蒸散させることができる。このプロセスを放射性核種で汚染された物質の表面層の除去に適用するレーザ除染技術の開発を実施している。本報告では、ノーマルパルスYAGレーザを用いたレーザ除染技術を核燃料サイクル施設のデコミッショニングや放射性廃棄物の処理に適用することを目的に、旧常陽廃棄物処理建家の配管を用いて実廃棄物レーザ除染試験とノーマルパルスYAGレーザの二次生成物飛散防止試験を実施した。主な結果は以下の通りである。(1)実廃棄物除染試験ノーマルパルスYAGレーザを用いて汚染配管を除染する際にB.G.レベルまで除染効果を得るには0.15mmの除去深さを目標に除染する必要がある。2回の照射で効率よく0.15mmの除去深さが得られる条件は、照射エネルギー密度1.3kJ/cmの2乗である。この条件を満たすには、レーザ平均パワーで364Wの発振器を用いた場合、繰返し速度30Hz、デューティ比50%、試験片移動速度30mm/sが最適である。(2)二次生成物飛散防止試験2次生成物の飛散防止を目的に除染ノズルに取り付ける飛散防止用小型フードを作成した。試験の結果、2次生成物は水平方向には広角度で飛散するが高い位置にはほとんど飛散しないこと、二次生成物の一部はフード内で反射してフード外に飛散することが確認された。飛散防止対策として、幅が広く内部で飛散物が反射しない構造を持ち、フードから飛び出さないようなクサビ型構造と吸引機構を持ったフードが有効である。

By irradiating the material surface with the laser beam, it is possible that the surface is rapidly heated, melted and transpired. Laser decontamination technique which applies this process to the removal of the material surface layer contaminated in the radionuclide has been developed. In this report, factual waste laser decontamination experiment using the piping of the old Joyo Waste Treatment Facility was carried out for the purpose of applying laser decontamination technique to decommissioning of nuclear fuel cycle facility. And, secondary product splash prevention test of a normal pulse YAG laser was carried out. Main results are as follows. (1)Factual wast decontamination test It is necessary to decontaminate with the aim of 0.15mm removal depth in order to obtain the decontamination effect to B.G.level, when the pollution piping is decontaminated using a normal pulse YAG laser. Conditions for efficiently obtaining 0.15mm removal depth and l.3kJ/cm$$^{2}$$ irradiation energy density in the irradiation of 2 times with 364W oscillator are 30Hz frequency, duty ratio 50 % in irradiation energy density 1.3kJ/cm$$^{2}$$, and test piece mobile speed 30mm/s. (2)The splash prevention of the secondary product test For the purpose of the splash prevention of the secondary product, the small hood for splash prevention installed in the decontamination nozzle was made. As a result of the test, the following were confirmed : That it does not scatter for the high position almost, though it horizontally scatters in the wide angle, and that the part of the secondary product scatters in the hood outside by reflecting in the hood. It is necessary to make the hood with wedged structure and attraction mechanism for the purpose of shatter-resistant of secandary products.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.