Diagnosis of degradation of SUS 304 steel material by the magnetic method

Demachi, Kazuyuki*; Miya, Kenzo

The quantitative evaluation of cracks in structural components is necessary to maintain its safety and to estimate its life. Moreover, the establishment of diagnosis technique of the material degradation before the appearance of crack is necessary for the higher safety. In this research, the magnetic value is chosen as the parameter for the material degradation. The crack is considered to occur by the local stress concentration, and the magnetic value is one of the most sensitive parameter for the elastic deformation of the material. The research about leak field change of SUS stainless steel due to the stress was performed by Chen et al,. The measured leak magnetic flux density is large around a crack. From such a measurement result, it is found that the leak is related with the elastic deformation of the material. The numerical method based on the Neural Network was developed for the inverse analysis of the magnetization in the specimen from the measured leak field. It is found the magnetization is large near the edges of the crack. The magnetic flux density obtained from this simulation result of the magnetization corresponds to the leak field. Then the inverse analysis method was developed to estimate the distribution of susceptibility in the specimen from the measured leak fie1d. Its results are denoted in the full report. The new nondestructive evaluation method was supposed for the diagnosis of the degradation of the material before the appearance of cracks.