ステンレス鋼レーザ溶接部の負荷荷重下における高エネルギー放射光によるひずみ分布測定

Strain measurement under loading in laser weld on austenitic stainless steel using high-energy synchrotron radiation

松本 恵介*; 菖蒲 敬久  ; 秋庭 義明*; 八木 毅*; 山本 勝太*

Matsumoto, Keisuke*; Shobu, Takahisa; Akiniwa, Yoshiaki*; Yagi, Tsuyoshi*; Yamamoto, Masataka*

The railway carbody structure for commuter and suburban services in Japan is often made of austenitic stainless steel, which is used in the form of the thin metal sheets by cold rolling. To observe the distribution, the strain scanning method by using high-energy synchrotron radiation was applied to the strain measurement of austenitic stainless steel. The transmission method was applied in order to observe internal weld zone. The specimen of lapped joint prepared by welding 2mm thick plates by laser weld method was used for measurement. The result by this measurement shows strain distribution in the weld zone successfully. In addition, the different tendency between the distribution of residual strain and that of strain under loading made be clear. The full width of half maximums, FWHM, of measurement shows a difference between the tendency of measured value of weld zone and that of base material.