検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

換気立坑250m坑道における初期地圧の計測

In situ stress measurements at 250m gallery off the ventilation shaft

中村 隆浩; 真田 祐幸; 杉田 裕 ; 加藤 春實*

Nakamura, Takahiro; Sanada, Hiroyuki; Sugita, Yutaka; Kato, Harumi*

幌延深地層研究センターの地下施設周辺岩盤の応力場を把握するため、換気立坑の深度250mの調査坑道において3本のボーリング孔を掘削し、水圧破砕法及び応力解放法と呼ばれる方法で初期地圧の評価を試みた。得られた結果は次のようである。水圧破砕法の評価では、応力状態が測定位置によらず一様であると仮定し、横き裂の法線応力と初期地圧の関係及び縦き裂の発生する位置と初期地圧の関係から250m坑道まわりの初期地圧を評価した。評価された初期地圧の中間及び最小主応力の大きさは接近しており、鉛直応力$$sigma$$vは250mの被りから推定される土被り圧の半分程度と小さかった。また、最大主応力はNE方向にあって水平面から約40度傾斜していた。応力解放法では、すべての孔底ひずみを用いて評価した平均的な初期地圧は、鉛直応力$$sigma$$vが被り圧の半分以下であり、水圧破砕試験の結果と整合した。また、応力解放法から評価された初期地圧の大きさも、そのオーダーが水圧破砕試験の結果と一致した。

For the purpose of studying the in situ state of stress around Horonobe Underground Research Laboratory, hydraulic fracturing technique was carried out three boreholes drilled from the 250m gallery located near the bottom of the ventilation shaft. The results of the measurements are summarized as follows. Shut-in pressure of inclined transverse cracks and the circumferential position of longitudinal cracks on the wellbore surface were used to determine the magnitude and orientation of principal stress around the 250m gallery on the assumption that all of the target zones of hydraulic fracturing were in a uniform stress state. The determined in situ stress state showed a little difference of magnitude between intermediate stress and minimum stress. The vertical component of the in situ stress was evaluated to be about a half of the overburden at the test site. The maximum principal stress was inclined to about 40 degrees from the level with azimuth of NE orientation.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.