Infrared thermography inspection for monoblock divertor target in JT-60SA

Nakamura, Shigetoshi; Sakurai, Shinji; Ozaki, Hidetsugu; Seki, Yohji; Yokoyama, Kenji; Sakasai, Akira; Tsuru, Daigo

Carbon Fiber Composite mono-block divertor target is required for power handling in JT-60SA. Heat removal capability of the target is degraded by joint defect which is induced in manufacturing process. For screening heat removal capability, infrared thermography inspection (IR inspection) is improved an accuracy for the target using threaded cooling tube. In IR inspection, the targets heated at 95C by hot water in steady state condition are instantaneously cooled down by cold water flow of 5C in three channels of test section. The heat removal capability of the targets is evaluated with comparing the transient thermal response time between defect-free and tested targets. A construction of a database for a correlation between the known defects, maximum surface temperatures in the heat load test and the IR inspection are successfully completed. Screening criteria is set with finite element methods based on the database.