Applicability study of Friction-Stir Process on CuCrZr-alloy

Hamaguchi, Dai; Morisada, Yoshiaki*; Fujii, Hidetoshi*; Tanigawa, Hiroyasu; Ozawa, Kazumi

Friction-Stir Process (FSP) were applied to OFCCu and ITER-Gr CuCrZr cooling pipe in order to evaluate the applicability of the process to mechanically strengthening pure-Cu and possible structural improvement on CuCrZr alloy. Former study revealed that the achievement of very fine grain structure at certain rotational speed and also the hardness increase to about 1.5 time higher within the stir-zone but also relatively shallow stir-zone depth compared to a length of the pin and rapid void formations. In order to avoid this phenomenon, compulsory cooling with liquid Co during the process was introduced, and the results showed the absence of void formation at relatively lower rational speed of around 300 RPM and also maintaining the effective stir-zone to relatively higher rotational speed compared to non-cooling tests. Similar FSP tests with compulsory cooling were also applied to ITER-Gr CuCrZr cooling pipe for divertor application. The detail will be reported on the presentation.