検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

瑞浪超深地層研究所における工学技術に関する検討(平成27年度); 掘削影響の修復・軽減技術の開発(委託研究)

Study on engineering technologies in the Mizunami Underground Research Laboratory (FY 2015); Development of recovery and mitigation technology on excavation damage (Contract research)

深谷 正明*; 竹田 宣典*; 三浦 律彦*; 石田 知子*; 畑 浩二*; 鵜山 雅夫*; 佐藤 伸*; 大熊 史子*; 早金 沙綾香*; 松井 裕哉; 佐藤 稔紀; 見掛 信一郎; 青柳 芳明

Fukaya, Masaaki*; Takeda, Nobufumi*; Miura, Norihiko*; Ishida, Tomoko*; Hata, Koji*; Uyama, Masao*; Sato, Shin*; Okuma, Fumiko*; Hayagane, Sayaka*; Matsui, Hiroya; Sato, Toshinori; Mikake, Shinichiro; Aoyagi, Yoshiaki

超深地層研究所計画における平成27年度の工学技術に関する検討のうち、「掘削影響の修復・軽減技術の開発」の研究の一環として、現在実施中の再冠水試験に伴う止水壁や冠水坑道周辺岩盤の挙動に関する詳細検討を行った。その結果、特に止水壁の温度変化については、解析結果と止水壁内の計測結果がよく一致しており、設計時に検討したクーリング対策工により温度応力によるひび割れの発生は防止できたと考えられる。また、冠水に伴う止水壁と岩盤境界の挙動についても、水-応力連成解析結果と種々の計測結果との比較検討により、解析で設定したモデルは概ね適切との結論を得た。

The researches on engineering technology in the Mizunami Underground Research Laboratory (MIU) project in FY2016, detailed investigations of the ( mechanical )behaviors of the plug and the rock mass around the reflood tunnel through ongoing reflood test were performed as part of (5) development of technologies for restoration and/or reduction of the excavation damage. As the result, particularly for the temperature change of the plug, its analytical results agree fairly well agree with the measurement ones. This means cracks induced by temperature stress can be prevented by the cooling countermeasure works reviewed in designing stage. In addition, for the behaviors of the plug and the bedrock boundary after reflooding the reflood tunnel, comparison between the results obtained by coupled hydro-mechanical analysis (stress-fluid coupled analysis ) with the ones by several measurements, concluded that the model established based on the analysis results is generally appropriated.

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.