Study on loss-of-cooling and loss-of-coolant accidents in spent fuel pool, 5; Investigation of cooling effects of SFP spray and alternate water injection with MAAP code

Nishimura, Satoshi*; Satake, Masaaki*; Nishi, Yoshihisa*; Nemoto, Yoshiyuki  ; Kaji, Yoshiyuki  

In this study, accident progression analyses in the SFP were performed to investigate cooling effects of the SFP spray and an alternate water injection in the loss-of-pool water accident with MAAP ver. 5.05 beta. Fuel cladding oxidation model which was created by JAEA based on their experimental data was selected and applied in the present calculations. In case of an assessment of SFP spray effects, decay heat, spray fraction going into the fuel assembly, spray droplet diameter, spray start time were selected as analytical parameters. When the SFP spray of 12.5 kg/s (200 GPM) starts 4 hours after the onset of the accident against the spent fuels with 4 months cooling and if the spray fraction going into the fuel assembly is greater than 30%, the maximum cladding temperature can be maintained under 727C (1000 K), resulting in avoiding the cladding failure.