検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年

プルトニウム燃料第三開発室解体前廃棄物一時保管設備3(FPG-03a,b,c)の解体撤去作業

Decommissioning of Pre-dismantling Temporary Waste Storage Facility 3 (FPG-03a,b,c) in Plutonium Fuel Production Facility

篠崎 雄; 會田 貴洋; 磯 貴人*; 小田倉 学*; 萩野谷 雅浩*; 門脇 弘幸*; 小林 真悟*; 稲川 拓夢*; 森元 大成*; 磯 秀敏 ; 久芳 明慈 

Shinozaki, Masaru; Aita, Takahiro; Iso, Takahito*; Odakura, Manabu*; Haginoya, Masahiro*; Kadowaki, Hiroyuki*; Kobayashi, Shingo*; Inagawa, Takumu*; Morimoto, Taisei*; Iso, Hidetoshi; Kuba, Meiji

核燃料サイクル工学研究所では、プルトニウム燃料技術開発センターのプルトニウム燃料第三開発室において、核燃料サイクル工学研究所内の廃止措置対象施設からのMOXを集約し、長期的に安定・安全に貯蔵することを計画している。このためには、施設内の核燃料物質をペレット化し集合体貯蔵庫に保管すること(以下、「保管体化作業」という)により、プルトニウム原料貯蔵庫の貯蔵スペースを確保する必要がある。この保管体化作業における安全性の向上及び万一の事故時のリスク低減のため、1設備あたりの処理バッチサイズを従来よりも下げることとし、処理バッチサイズを決める粉末秤量・均一化混合設備の新設を計画、その設置スペースを粉末調製室(1)(FP-101)に確保するため、本件の解体前廃棄物一時保管設備3(FPG-03a,b,c)を解体撤去した。今回の解体撤去対象は、平成5年1月に使用を開始した造粒・整粒設備、添加剤混合設備および受払搬送設備で構成され、平成24年2月3日に使用を終了し、廃棄施設となった設備である。その後、ホールドアップ量低減を図るため、試験第1課によりグローブ作業で内装設備の解体・撤去が進められ、本解体撤去前には内装設備が大型機械を除きほとんど無い状態にあった。本報告書では、本設備のグローブボックスと一部の内装設備及び周辺機器の解体撤去に係るグリーンハウスの設営方法、解体撤去手順、粉末工程設備の特有の課題(粉塵等)について報告する。

It is planned that the MOX (Mixed Oxide) from the decommissioned facilities in Nuclear Fuel Cycle Engineering Laboratories is going to be consolidated and stored stably and safely for a long term in Plutonium Fuel Production Facility of the Plutonium Fuel Development Center of Nuclear Fuel Cycle Engineering Laboratories. For this purpose, it is necessary to pelletize nuclear fuel materials in the facility and store them in the assembly storage (hereinafter referred to as "waste packaging work") to secure storage space in the plutonium material storage. As a countermeasure to reduce the facility risk in this waste packing work, it was decided to construct a new powder weighing and homogenization mixing facility to physically limit the amount (batch size) of nuclear fuel materials handled at the entrance of the process. In order to secure the installation space for the new facility in the powder preparation room (1) (FP-101), the pre-dismantling temporary waste storage facility 3 (FPG-03a, b, c) was dismantled and removed. This facility consists of a granulating and sizing facility, an additive mixing facility, and a receiving and delivering guided facility, which started to be used from January 1993, and was discontinued on February 3, 2012 and became a waste facility. Subsequently, the dismantling and removal of the interior equipment was carried out by pellet fabrication section for glove operation to reduce the amount of hold-up, and before the main dismantling and removal, there was almost no interior equipment except for large machinery. This report describes the dismantling and removal of the glove box and some interior equipment and peripherals of the facility, as well as the Green House setup method, dismantling and removal procedures, and issues specific to powder process equipment (dust, etc.).

Access

:

- Accesses

InCites™

:

Altmetrics

:

[CLARIVATE ANALYTICS], [WEB OF SCIENCE], [HIGHLY CITED PAPER & CUP LOGO] and [HOT PAPER & FIRE LOGO] are trademarks of Clarivate Analytics, and/or its affiliated company or companies, and used herein by permission and/or license.