Measurement of fragments of a wall-impinging liquid jet in a shallow pool
Horiguchi, Naoki ; Yoshida, Hiroyuki ; Kaneko, Akiko*; Abe, Yutaka*
For safety evaluation of nuclear reactors in severe accidents, it is important to estimate physical quantities of fragments generated from the molten fuel jet, which falls in a pool and breaks up. The evaluation method has been developed for the behavior as liquid jet with hydrodynamic interaction including fuel coolant interaction (FCI). In case of a shallow pool assumed in ex-vessel, the molten fuel jet is assumed to behave as wall-impinging liquid jet and to form liquid film flow spreading on the floor with/without fragmentation. In our research, focusing on hydrodynamic interaction and the transient 3-dimensional spreading on the floor, we have developed the evaluation method by numerical simulation using the two-phase flow simulation code with interface tracking method (TPFIT) developed by JAEA and, the experimental method using the 3D-LIF method in liquid-liquid system for the validation data. In our previous studies, we investigated the wall-impinging liquid jet behavior with fragmentation and observed that the liquid film flow had some characteristic parts transiently. Since it indicates that the quantities change depending on the parts and affect the safety evaluation, it is important to measure the quantities of the fragments generated from each part. This paper explains the measurement of the physical quantities of the fragments generated from each part of the wall-impinging liquid jet in a shallow pool for the validation of the numerical simulation. We conducted an experiment with the 3D-LIF method and segmented the experimental data based on the fragmentation point over the liquid film flow using the dispersed phase tracking method, developed by JAEA. Then, we measured the diameter and amount of the fragments from the segmented experimental data and investigated their changing trend.