Study on optimization method for contamination inspection of vehicles in nuclear emergency, 1; Quick measurement by existent portable radiation portal monitors for vehicles

Hiraoka, Hirokazu  ; Kawasaki, Kohei*; Kimura, Masanori ; Togawa, Orihiko ; Saito, Shota ; Ezaki, Iwao*

When the nuclear emergency occurs, inhabitants take the contamination inspection to evacuate. A large number of vehicle will come to the inspection area and make there congested. To do the quick inspection, simultaneous measurement of tires and wipers using the portable radiation portal monitors for vehicles is a key point. Consequently, we attempted the count rates obtained from tires and wipers are discriminated. First, the vehicle was driven at 5 km/h and the -ray counts rate was measured by the monitor. Ba sources were attached around the tire or on the wiper and measurements were taken 30 times each. Next, discrimination conditions based on a linear function were applied to the normalized count rates, with the maximum count rate of the measured values (Net value) set to 1.0, to evaluate the discrimination accuracy between the tire and the wiper. The evaluation results showed that the pattern with the source attached around the tire correctly discriminated 29 out of 30 times, while the pattern with the source attached on the wiper correctly discriminated 20 out of 30 times. It was found that in order to improve the accuracy of discrimination, the measurement method must be improved so that there is a large difference between measured values of the tire and the wiper.