Cryogenic impact fracture behavior of a high-Mn austenitic steel using electron backscatter diffraction and neutron Bragg-edge transmission imaging

Wang, Y. W.*; Wang, H. H.*; Su, Y. H.  ; Xu, P. G.   ; Shinohara, Takenao   

A unique impact fracture behavior is found in a high-Mn austenitic steel (24Mn-4Cr-0.4C-0.3Cu) in this work. The steel exhibits concurrent twinning-induced plasticity (TWIP) effect and the transformation-induced plasticity (TRIP) effect. By analyzing the load-deflection curves recorded during Charpy impact testing, the resistance to crack initiation and propagation is quantified from the absorbed energy. The high-Mn steel demonstrates good resistance to crack initiation at 273 K and 77 K. However, as the temperature decreases from 273 K to 77 K, there is an accelerated transition from stable crack growth to unstable crack growth during impact, resulting in the deterioration of resistance to crack propagation. The plastic deformation of the impact-tested samples, especially in the region close to the crack-path profile was quantitatively analyzed using neutron Bragg-edge transmission (BET) imaging. The deformation zones, divided by using the width of the 200 Bragg edge, exhibit good agreement with the impact absorbed energy characteristics obtained from dynamic load-deflection curves. Moreover, the unstable growth transition point was roughly determined on the impact-tested sample. Then, the electron backscatter diffraction (EBSD) technique is employed to examine the deformation microstructure along the crack-path in the impact-tested samples. The results revealed the dual roles of TRIP effect in impact toughness of the high-Mn steel. On one hand, the TRIP effect plays a positive role in improving resistance to crack initiation and propagation. On the other hand, the excessive accumulation of brittle /'-martensite caused by the enhanced TRIP effect at 77 K leads to quasi-cleavage fracture, thereby playing a negative role. Finally, we discussed the prominent toughening mechanisms associated with the TWIP and TRIP effects, which greatly impact the impact fracture behavior.