Evaluation of radiation dose caused by bremsstrahlung photons generated by high-energy beta rays using the PHITS and GEANT4 simulation codes

Shikaze, Yoshiaki 

Among the radioactive nuclides inside the nuclear reactor buildings emitted by the Fukushima Daiichi nuclear reactor accident, high-energy beta-ray sources, such as strontium-90 and yttrium-90, generate bremsstrahlung photons in the building materials, comprising the wall, floor, and interior structure. Therefore, evaluating the radiation dose of the bremsstrahlung to the workers in the nuclear reactor building is crucial for radiation protection. The precision of the evaluation calculation of the bremsstrahlung dose was investigated by comparing the Particle and Heavy Ion Transport code System (PHITS) and the GEometry ANd Tracking (GEANT4) simulation code results. In the calculation, behind various shielding plates (lead, copper, aluminum, glass, and polyethylene, with thicknesses ranging from 1.0 to 40 mm), the water cylinder was set as the evaluated material, the absorbed dose and the deposited energy spectrum by the bremsstrahlung photons were obtained, and the characteristics and differences for both simulation codes were investigated. In the comparison results of the deposited energy spectrum, the spectral shapes have consistent trends. In the energy range below several tens of keV, a peak is seen in the PHITS spectrum for the lead shielding material. In comparing the absorbed dose under various conditions of the shielding plate for generating bremsstrahlung photons, most results for both codes correlate within an 10% difference for 2.280 MeV beta-ray sources and an 20% difference for 0.5459 MeV beta-ray sources, except for 30% for 20 mm thick lead. Although there were differences in some cases, the evaluation results of the two simulation codes were concluded to correlate well with the above precision.