Whole core analysis of BEAVRS benchmark for hot zero power condition using MVP3 with JENDL-5
JENDL-5とMVP3を用いた高温ゼロ出力条件に対するBEAVRSベンチマークの全炉心解析
鈴木 求*; 長家 康展

Suzuki, Motomu*; Nagaya, Yasunobu
最新版の日本の評価済み核データライブラリJENDL-5の公開とともに、高温ゼロ出力条件にBEAVRSベンチマークの核特性パラメータに対するJENDL-5の予測精度を評価した。臨界性、制御棒バンク価値(CRW)、等温温度係数(ITC)、炉心内検出器信号を計算し、実験値と比較した。臨界性については、実験値に対する計算値の比(C/E値)が1.0001から1.0045であった。断面積データをJENDL-4.0u1からJENDL-5に置き換える感度解析により、
H,
U,
U, and
Oが臨界性に大きな影響を与えることがわかった。個々のCRWは50pcm以内の差異で一致し、全CRWは100pcm以内で一致した。
=5.56Kとした場合のITCは実験値を負の方向に過大評価し、
=2.78Kとした場合のITCは1標準偏差以内で実験値と一致した。軸方向の検出器信号は、最大相対誤差が4.46%で、二乗平均平方根誤差が2.13%であった。JENDL-4.0u1とJENDL-5を用いた計算値の際についても調査した。
With the release of the latest Japanese evaluated nuclear data library JENDL-5, the prediction accuracy of JENDL-5 for neutronics parameters of the BEAVRS benchmark for the hot zero power condition was evaluated in this study. The criticality, control rod bank worth (CRW), isothermal temperature coefficient (ITC), and in-core detector signals were calculated and compared with the measured data for evaluation. For the criticality, the calculation-to-experimental (C/E) values varied between 1.0001 and 1.0045. Sensitivity analysis by replacing cross section data from the JENDL-4.0u1 with JENDL-5 revealed that
H,
U,
U, and
O significantly affected the criticality. The individual CRW agreed within 50 pcm, and total CRW also agreed within 100 pcm from the measured values. The ITC results calculated with a temperature deviation of 5.56 K case were negatively overestimated comparing with the measured values; whereas those of with 2.78 K were improved and agree with the measured values within a standard deviation. The axial detector signals indicated a maximum relative error of 4.46% and the root mean squared error (RMSE) of 2.13%. The differences between the previous version of JENDL-4.0u1 and JENDL-5 were also investigated.