Modeling the extraction of bound rubber from silica-filled styrene-butadiene rubber with toluene

田村 由起子*; 荒川 勝利*; 竹中 幹人*; 中西 洋平*; 藤波 想*; 柴田 基樹*; 山本 勝宏*; 宮田 登*; 山田 雅子*; 瀬戸 秀紀*; 山田 悟史*; 青木 裕之  ; 宮崎 司*

Tamura, Yukiko*; Arakawa, Masato*; Takenaka, Mikihito*; Nakanishi, Yohei*; Fujinami, So*; Shibata, Motoki*; Yamamoto, Katsuhiro*; Miyata, Noboru*; Yamada, Masako*; Seto, Hideki*; Yamada, Norifumi*; Aoki, Hiroyuki; Miyazaki, Tsukasa*

To investigate the relationship between the mechanical properties of silica-filled styrene-butadiene rubber (SBR) and the amount of bound rubber at the filler/rubber interface, the polymer matrix was extracted from silica-filled SBR using toluene at room temperature. In this study, this extraction process was reproduced by leaching a thermally annealed SBR layer deposited on a Si substrate in toluene at room temperature, where the adsorption layer of the SBR was grown at the interface with the substrate by thermal annealing. The SBR adsorption layer on the Si substrate has two-layer structures consisting of an inner and outer adsorption layers, which correspond to the tightly and loosely bound rubbers on the filler surface of the silica-filled SBR, respectively. For the sample annealed for less than 6 h, the outer adsorption layer, loosely bound to the substrate, was easily leached in toluene for 5 min, leaving only the inner adsorption layer on the substrate. For the samples annealed for more than 24 h, a large portion of the outer adsorption layer remained on top of the inner adsorption layer as a terrace structure. However, even for the sample annealed for 24 h, treating with toluene for 24 h completely leached the outer adsorption layer from the inner adsorption layer, although the inner adsorption layer remained on the substrate. It was found that the loosely bound rubber in the silica-filled SBR could be easily extracted from the filler surface, along with the free polymer chains in the polymer matrix during extraction with toluene at room temperature. In contrast, the tightly bound rubber was not leached by toluene at room temperature. This may be because the interfacial polymer chains within approximately 1 nm of the substrate surface were strongly constrained to the substrate, and even toluene molecules were excluded.