Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Endo, Kazuki*; Kobayashi, Shunsuke*; Jasmine, H.*; Sakai, Takaaki*; Matsushita, Kentaro; Ezure, Toshiki; Tanaka, Masaaki
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
Assuming gas entrainment (GE) to the main coolant circulation system from cover gas which is an inert gas to cover sodium coolant in a reactor vessel of the sodium cooled fast reactor, there is a concern that reactivity disturbance will occur when bubbles pass through the reactor core. Conventionally, an evaluation method based on static vortex extension theory has been employed for the GE prediction. However, it is known that the method gives rather overestimation for the GE occurrence from the unsteady traveling vortex dimple at the wide liquid surface. In order to contribute to understand the phenomena, experimental data have been accumulated by the basic water experiment. In this study, measurement was performed for the length of a gas cores that grew while moving on the free liquid surface by dynamic image processing, and the types of the GEs and the occurrence conditions were evaluated.
Kobayashi, Shunsuke*; Endo, Kazuki*; Jasmine, H.*; Sakai, Takaaki*; Matsushita, Kentaro; Ezure, Toshiki; Tanaka, Masaaki
Dai-27-Kai Doryoku, Enerugi Gijutsu Shimpojiumu Koen Rombunshu (Internet), 5 Pages, 2023/09
Assuming gas entrainment (GE) to the main coolant circulation system from cover gas which is an inert gas to cover sodium coolant in a reactor vessel of the sodium cooled fast reactor, there is a concern that reactivity disturbance will occur when bubbles pass through the reactor core. Conventionally, an evaluation method based on static vortex extension theory has been employed for the GE prediction. However, it is known that the method gives rather overestimation for the GE occurrence from the unsteady traveling vortex dimple at the wide liquid surface. In order to contribute to understand the phenomena, experimental data have been accumulated by the basic water experiment. In this study, the velocity distributions were measured under the conditions where GE occurs by particle image velocity (PIV) measurement in an experimental system to observe the gas cores that grow from the unsteady traveling vortex dimple.
/GaN interfaces with suppressed Ga-oxide interlayer via sputter deposition of SiOOnishi, Kentaro*; Kobayashi, Takuma*; Mizobata, Hidetoshi*; Nozaki, Mikito*; Yoshigoe, Akitaka; Shimura, Takayoshi*; Watanabe, Heiji*
Japanese Journal of Applied Physics, 62(5), p.050903_1 - 050903_4, 2023/05
Times Cited Count：2 Percentile：66.71(Physics, Applied)While the formation of an GaO
interlayer is key to achieving SiO/GaN interfaces with low defect density, it can affect the reliability and stability of metal-oxide-semiconductor (MOS) devices if the annealing conditions are not properly designed. In the present study, we aimed to minimize the growth of the GaO layer on the basis of the sputter deposition of SiO on GaN. Synchrotron radiation X-ray photoelectron spectrometry measurements confirmed the suppressed growth of the GaO layer compared with a SiO/GaN structure formed by plasma-enhanced chemical vapor deposition. Negligible GaO growth was also observed when subsequent oxygen annealing up to 600
C was performed. A MOS device with negligible capacitance-voltage hysteresis, nearly ideal flat-band voltage, and low leakage current was demonstrated by performing oxygen and forming gas annealing at temperatures of 600C and 400C, respectively.
Watanabe, Jin*; Araki, Yasufumi; Kobayashi, Koji*; Ozawa, Akihiro*; Nomura, Kentaro*
Journal of the Physical Society of Japan, 91(8), p.083702_1 - 083702_5, 2022/08
Times Cited Count：4 Percentile：63.40(Physics, Multidisciplinary)We investigate magnetic orderings on kagome lattice numerically from the tight-binding Hamiltonian of electrons, governed by the filling factor and spin-orbit coupling (SOC) of electrons. We find that even a simple kagome lattice model can host both ferromagnetic and noncollinear antiferromagnetic orderings depending on the electron filling, reflecting gap structures in the Dirac and flat bands characteristic to the kagome lattice. Kane-Mele- or Rashba-type SOC tends to stabilize noncollinear orderings, such a magnetic spirals and 120-degree antiferromagnetic orderings, due to the effective Dzyaloshinskii-Moriya interaction from SOC. The obtained phase structure helps qualitative understanding of magnetic orderings in various kagome-layered materials with Weyl or Dirac electrons.
Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.
Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07
This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.
Kimata, Tetsuya*; Kakitani, Kenta*; Yamamoto, Shunya*; Shimoyama, Iwao; Matsumura, Daiju; Iwase, Akihiro*; Mao, W.*; Kobayashi, Tomohiro*; Yamaki, Tetsuya*; Terai, Takayuki*
Physical Review Materials (Internet), 6(3), p.035801_1 - 035801_7, 2022/03
Times Cited Count：7 Percentile：67.05(Materials Science, Multidisciplinary)Sugita, Tsuyoshi; Kobayashi, Kentaro*; Yamazaki, Taiki*; Isaka, Mayu*; Itabashi, Hideyuki*; Mori, Masanobu*
Journal of Photochemistry and Photobiology A; Chemistry, 400, p.112662_1 - 112662_8, 2020/09
Times Cited Count：1 Percentile：2.37(Chemistry, Physical)In this study, we developed an in-line photocatalytic performance evaluation system in which a flow reactor was connected to the ion chromatography to accurately evaluate the performance of the photocatalyst. This system was used to evaluate the photocatalyst supported by the two-layer support method on the substrate, such as glass beads. The performance of the photocatalyst was evaluated using dimethyl sulfoxide (DMSO), and it was possible to monitor the decomposition of DMSO by UV and the formation of by-products, such as methane sulfonate (MSO) and sulfate (SA). This system can be expected to be useful not only for evaluating the decomposition performance of an object using a photocatalyst but also for evaluating the byproducts.
Hirahara, Toru*; Otrokov, M. M.*; Sasaki, Taisuke*; Sumida, Kazuki*; Tomohiro, Yuta*; Kusaka, Shotaro*; Okuyama, Yuma*; Ichinokura, Satoru*; Kobayashi, Masaki*; Takeda, Yukiharu; et al.
Nature Communications (Internet), 11, p.4821_1 - 4821_8, 2020/09
Times Cited Count：42 Percentile：93.04(Multidisciplinary Sciences)Kondo, Yasuhiro; Hirano, Koichiro; Ito, Takashi; Kikuzawa, Nobuhiro; Kitamura, Ryo; Morishita, Takatoshi; Oguri, Hidetomo; Okoshi, Kiyonori; Shinozaki, Shinichi; Shinto, Katsuhiro; et al.
Journal of Physics; Conference Series, 1350, p.012077_1 - 012077_7, 2019/12
Times Cited Count：1 Percentile：51.67(Physics, Particles & Fields)We have upgraded a 3-MeV linac at J-PARC. The ion source is same as the J-PARC linac's, and the old 30-mA RFQ is replaced by a spare 50-mA RFQ, therefore, the beam energy is 3 MeV and the nominal beam current is 50 mA. The main purpose of this system is to test the spare RFQ, but also used for testing of various components required in order to keep the stable operation of the J-PARC accelerator. The accelerator has been already commissioned, and measurement programs have been started. In this paper, present status of this 3-MeV linac is presented.
-coated wire mesh prepared via a double-layer coating methodMori, Masanobu*; Sugita, Tsuyoshi; Fujii, Kengo*; Yamazaki, Taiki*; Isaka, Mayu*; Kobayashi, Kentaro*; Iwamoto, Shinji*; Itabashi, Hideyuki*
Analytical Sciences, 34(12), p.1449 - 1453, 2018/12
Times Cited Count：2 Percentile：6.93(Chemistry, Analytical)The photocatalyst coating stainless-steel wire mesh (TiO-WM) was prepared by double-layer coating method. The TiO-WM was evaluated using flow analytical system, which included the reactor and conductimetric detector (FAS-CD). The DMSO decomposition test through the FAS-CD reveal that photocatalytst was stable coating on the stainless-steel wire mesh.
as anionic adsorptive photocatalystSugita, Tsuyoshi; Kobayashi, Kenichi*; Kobayashi, Kentaro*; Yamazaki, Taiki*; Fujii, Kengo*; Itabashi, Hideyuki*; Mori, Masanobu*
Journal of Photochemistry and Photobiology A; Chemistry, 356, p.71 - 80, 2018/04
Times Cited Count：5 Percentile：12.91(Chemistry, Physical)Photocatalysts shows high redox property only by light irradiation. However, the reaction performance is lowered in aqueous phase due to the low contact efficiency between catalyst and targets. In this study, to enhance aqueous adsorption and photodecomposition of anionic organic target, we developed an amino functional-based spacer (3-[2-(2- aminoethylamino)ethylamino]propyl-trimethoxysilane, DETA), and used it to modify TiO. The modified catalyst with positively charged amino groups could enhance the adsorption and photodecomposition of anionic organic targets.
Futatsukawa, Kenta*; Kobayashi, Tetsuya*; Sato, Yoshikatsu; Shinozaki, Shinichi; Fang, Z.*; Fukui, Yuji*; Mizobata, Satoshi; Michizono, Shinichiro*
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.327 - 331, 2016/11
In the J-PARC linac, an intermediate-pulse with the comb-like structure is shaped by kicking an unwanted beam by the chopper cavity. Therefore, the cavities lying downstream of the RF-chopper have the beam loading with this beam shape. The present feedforward system which assumes the averaged beam current and not the comb-like beam was operated in the present LLRF, because the beam current in the linac was lower than the design value. However, it has been difficult that the required precision for the RF system is satisfied with increasing beam current. Thus, we performed the beam study of the beam loading compensation with the same shapes as the intermediate-pulses. The positive results for the cavities of SDTL and DTL with high Q values were obtained compared to the present system. On the other hand, when this compensation system was used in the case of ACS cavities, the neighbor modes were excited by the input RF. We have to improve the FF system for the operation against the real beam.
Naito, Fujio*; Anami, Shozo*; Ikegami, Kiyoshi*; Uota, Masahiko*; Ouchi, Toshikatsu*; Onishi, Takahiro*; Oba, Toshiyuki*; Obina, Takashi*; Kawamura, Masato*; Kumada, Hiroaki*; et al.
Proceedings of 13th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1244 - 1246, 2016/11
The proton linac installed in the Ibaraki Neutron Medical Research Center is used for production of the intense neutron flux for the Boron Neutron Capture Therapy (BNCT). The linac consists of the 3-MeV RFQ and the 8-MeV DTL. Design average beam current is 10mA. Target is made of Beryllium. First neutron production from the Beryllium target was observed at the end of 2015 with the low intensity beam as a demonstration. After the observation of neutron production, a lot of improvement s was carried out in order to increase the proton beam intensity for the real beam commissioning. The beam commissioning has been started on May 2016. The status of the commissioning is summarized in this report.
Ozu, Akira; Takase, Misao*; Haruyama, Mitsuo; Kurata, Noritaka*; Kobayashi, Nozomi*; Kureta, Masatoshi; Nakamura, Tatsuya; To, Kentaro; Sakasai, Kaoru; Suzuki, Hiroyuki; et al.
Nuclear Instruments and Methods in Physics Research A, 798, p.62 - 69, 2015/10
Times Cited Count：2 Percentile：17.42(Instruments & Instrumentation)The light transport properties of scintillator light inside alternative He-3 neutron detector modules using scintillator sheets have been investigated by a ray-tracing simulation code. The detector module consists of a light-reflecting tube, a thin rectangular ceramic scintillator sheet laminated on a glass plate, and two photo-multiplier tubes (PMTs) mounted at both ends of the detector tube. The light induced on the surface of the scintillator sheet via nuclear interaction between the scintillator and neutrons are detected by the two PMTs. The light output of various detector modules in which the scintillator sheets are installed with several different arrangements were examined and evaluated in comparison with experimental results. The results derived from the simulation reveal that the light transport property is strongly dependent on the arrangement of the scintillator sheet inside the tube and the shape of the tube.
Futatsukawa, Kenta*; Kobayashi, Tetsuya*; Sato, Fumiaki; Shinozaki, Shinichi; Chishiro, Etsuji; Hirano, Koichiro; Fang, Z.*; Fukui, Yuji*; Hori, Toshihiko; Michizono, Shinichiro*
Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1317 - 1320, 2015/09
In the J-PARC linac, an RF deflector installed in 3-MeV Medium Energy Beam Transport (MEBT1) is used to kick the unnecessary beam and the intermediate-pulse like a comb is created. The kicked beam leads to a scraper downstream the RF deflector and lose all kinetic energy. When the beam current increases to 50 mA of the design value, the heat load of a scraper to irradiate the kicked beam increases and its surface is predicted to be damaged. Therefore, we are preparing the tandem scrapers to reduce the damage. The half of the kicked beam leads to a scraper and the residual is to the other. The chopping operation is achieved by rotating the phase of the RF deflector in the periodic cycles by the LLRF system. We will introduce the phase rotation system and the test results.
Narita, Ayumi; Kaminaga, Kiichi; Yokoya, Akinari; Noguchi, Miho; Kobayashi, Katsumi*; Usami, Noriko*; Fujii, Kentaro
Radiation Protection Dosimetry, 166(1-4), p.192 - 196, 2015/09
Times Cited Count：3 Percentile：25.54(Environmental Sciences)For the knowledge about irradiation effects of mammalian cells depending on the cell cycle, most of them had been analyzed by statistical approches. Our purpose is to establish the method for real-time observation of irradiated cells under a microscope. Fluorescent ubiquitination-based cell cycle indicator (FUCCI) human cancer (HeLa) cells (red indicates G1; green, S/G2) were exposed to a synchrotron X-ray microbeam. Cells in either G1 or S/G2 were selectively irradiated according to cell color observed in the same microscopic field in a culture dish. Time-lapse micrographs of the irradiated cells were acquired for 24 h after irradiation. The cell cycle was strongly arrested by irradiation at S/G2 and never progressed to G1. In contrast, cells irradiated at G1 progress to S/G2 with a similar time course as non-irradiated control cells. These results show single FUCCI cell exposure and live cell imaging are powerful methods for studying radiation effects on the cell cycle.
Futatsukawa, Kenta*; Ito, Yuichi; Kikuzawa, Nobuhiro; Kobayashi, Tetsuya*; Sato, Fumiaki; Shinozaki, Shinichi; Suzuki, Takahiro*; Fang, Z.*; Fukui, Yuji*; Michizono, Shinichiro*
Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.1126 - 1129, 2014/06
no abstracts in English
Ozu, Akira; Takase, Misao*; Kurata, Noritaka*; Kobayashi, Nozomi*; Tobita, Hiroshi; Haruyama, Mitsuo; Kureta, Masatoshi; Nakamura, Tatsuya; Suzuki, Hiroyuki; To, Kentaro; et al.
Proceedings of 2014 IEEE Nuclear Science Symposium and Medical Imaging Conference; 21st International Symposium on Room-Temperature Semiconductor X-ray and 
-ray detectors (NSS/MIC 2014), 5 Pages, 2014/00
In Japan Atomic Energy Agency, the helium-3 alternative neutron detector using ceramic scintillators for nuclear safeguards is under development with the support of the government. The alternative detector module consists of four components: an aluminum regular square tube, a light reflecting foil put on the inner surface of the square tube, a rectangular scintillator sheet sintered on a glass plate, and two PMTs provided at both ends of the tube. The scintillator sheet is fit on the diagonal inside the square tube. The light transport property of scintillator lights inside the tube influences on the fundamental performance of the alternative detector. Therefore, the properties of the lights emitted on the surface of the scintillator sheet and scintillation lights passing through the glass plate to the PMTs in several arrangements of the scintillator in the tubes were investigated with a ray-tracing simulation. The results are described in comparison with the experimental results.
Ozu, Akira; Kureta, Masatoshi; Haruyama, Mitsuo; Takase, Misao; Kurata, Noritaka; Kobayashi, Nozomi; Soyama, Kazuhiko; Nakamura, Tatsuya; Sakasai, Kaoru; To, Kentaro; et al.
Kaku Busshitsu Kanri Gakkai (INMM) Nihon Shibu Dai-34-Kai Nenji Taikai Rombunshu (Internet), 9 Pages, 2013/10
no abstracts in English
Fukui, Yuji*; Kawamura, Masato*; Kobayashi, Tetsuya*; Fang, Z.*; Futatsukawa, Kenta*; Sato, Fumiaki; Shinozaki, Shinichi; Suzuki, Hiroyuki; Chishiro, Etsuji; Hori, Toshihiko; et al.
Proceedings of 9th Annual Meeting of Particle Accelerator Society of Japan (Internet), p.762 - 764, 2013/08
no abstracts in English
