Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Mitsuyasu, Yusuke*; Oka, Toshitaka; Takahashi, Atsushi*; Kino, Yasushi*; Okutsu, Kenichi*; Sekine, Tsutomu*; Yamashita, Takuma*; Shimizu, Yoshinaka*; Chiba, Mirei*; Suzuki, Toshihiko*; et al.
Radiation Protection Dosimetry, 199(14), p.1620 - 1625, 2023/09
Times Cited Count:0 Percentile:0.01(Environmental Sciences)We have been conducting dose assessments for Japanese macaques captured in Fukushima to reveal radiobiological effects on the low-dose expose animals. To accurately determine the external exposure dose, it is desirable to examine the analysis of the CO radical intensity. We examined ESR spectra of teeth of 10 macaques captured in Fukushima by two spectrum-decomposition algorithms.
Mitsuyasu, Yusuke*; Oka, Toshitaka; Takahashi, Atsushi*; Kino, Yasushi*; Okutsu, Kenichi*; Sekine, Tsutomu*; Yamashita, Takuma*; Shimizu, Yoshinaka*; Chiba, Mirei*; Suzuki, Toshihiko*; et al.
KEK Proceedings 2022-2, p.120 - 125, 2022/11
We investigate the effect of sample's anisotropy and measurement condition to obtain the higher reproducibility for the shape of the ESR spectrum and the intensity of CO radical.
Mitsuyasu, Yusuke*; Oka, Toshitaka; Takahashi, Atsushi*; Koarai, Kazuma; Kino, Yasushi*; Okutsu, Kenichi*; Sekine, Tsutomu*; Yamashita, Takuma*; Shimizu, Yoshinaka*; Chiba, Mirei*; et al.
KEK Proceedings 2021-2, p.91 - 96, 2021/12
We examined whether the ESR dose estimation method could be applied to wild Japanese macaque. In this work, we investigated the enamel preparation protocol and the analytical method of the ESR spectra.
Oka, Toshitaka; Takahashi, Atsushi*; Koarai, Kazuma; Mitsuyasu, Yusuke*; Kino, Yasushi*; Sekine, Tsutomu*; Shimizu, Yoshinaka*; Chiba, Mirei*; Suzuki, Toshihiko*; Osaka, Ken*; et al.
Radiation Measurements, 134, p.106315_1 - 106315_4, 2020/06
Times Cited Count:5 Percentile:52.06(Nuclear Science & Technology)The relationship between the CO radical intensity and the absorbed dose (dose response curve) of tooth enamel of Japanese macaque was observed by electron spin resonance and the detection limit of our system was estimated to be 33.5 mGy, which is comparable to the detection limit for human molar teeth. Using the dose response curve, external exposure dose for seven wild Japanese macaques captured in Fukushima prefecture were examined. The results suggest that the external exposure dose for the wild Japanese macaques were ranged between 45 mGy to 300 mGy.
Tanaka, Kosuke; Miwa, Shuhei; Sato, Isamu; Hirosawa, Takashi; Sekine, Shinichi; Osaka, Masahiko; Obayashi, Hiroshi; Koyama, Shinichi
Journal of Nuclear Science and Technology, 51(7-8), p.876 - 885, 2014/07
Times Cited Count:5 Percentile:36.65(Nuclear Science & Technology)As a first step for obtaining experimental data on the effects of high-temperature chemical interaction on fission product (FP) release behavior, we focused on the dissolution of irradiated uranium plutonium mixed oxide (MOX) fuel by molten zircaloy (Zry), and carried out a heating test under the reducing atmosphere. Pieces of an irradiated MOX fuel pellet and cladding were subjected to the heating test at 2373 K for 5 min. The fractional release rate of cesium (specifically Cs) was monitored during the test and its release behavior was evaluated. The observation of microstructures and measurements of elemental distribution in the heated specimen were also performed. We demonstrated experimentally that the fuel dissolution by molten Zry accelerated the release of Cs from the fuel pellets.
Fukazawa, Tomoko*; Ikeda, Naohiro*; Tabata, Mayu*; Hattori, Masataka*; Aizawa, Mamoru*; Yunoki, Shunji*; Sekine, Yurina
Journal of Polymer Science, Part B; Polymer Physics, 51(13), p.1017 - 1027, 2013/07
Times Cited Count:36 Percentile:75.63(Polymer Science)Osaka, Masahiko; Tanaka, Kosuke; Sekine, Shinichi; Akutsu, Yoko; Suzuki, Tatsuya*; Mimura, Hitoshi*
Journal of Nuclear Materials, 427(1-3), p.384 - 388, 2012/08
Times Cited Count:4 Percentile:31.65(Materials Science, Multidisciplinary)Morphology-controlled synthesis of Mo compounds from a nitric acid solution by microwave heating was investigated for effective utilizations of Mo fission product from a high level nuclear waste. The microwave heating method was revealed to greatly accelerate crystallization and crystal growth of the synthesized powder. Addition of a small amount of Zr stabilized synthesis of a hexagonal-MoO powder. Furthermore, the microwave heating with Zr-addition has synthesized a specific urchin-like shaped hexagonal-MoO
crystal having a good crystallinity. The present methods would be useful for effective utilization of Mo from high level nuclear waste in terms of their practicability and ability to the morphology control.
Sekine, Ayako*; Seko, Noriaki; Tamada, Masao; Suzuki, Yoshio*
Radiation Physics and Chemistry, 79(1), p.16 - 21, 2010/01
Times Cited Count:57 Percentile:95.82(Chemistry, Physical)A fibrous adsorbent for Hg ions was synthesized by radiation-induced emulsion graft polymerization of glycidyl methacrylate (GMA) onto a nonwoven cotton fabric and subsequent chemical modification. The optimal pre-irradiation dose for initiation of the graft polymerization of GMA, which minimized the effects of radiation damage on the mechanical strength of the nonwoven cotton fabric, was found to be 10 kGy. The GMA-grafted nonwoven cotton fabric was subsequently modified with ethylenediamine (EDA) or diethylenetriamine (DETA) to obtain a Hg adsorbent. The resulting amine-type adsorbents were evaluated for batch and continuous adsorption of Hg. In batch adsorption, the distribution coefficients of Hg reached 1.910
and 1.0
10
for EDA- and DETA-type adsorbents, respectively. A column packed with EDA-type adsorbent removed Hg from 1.8 ppm Hg solution at a space velocity of 100 h
, which corresponds to 16,000 times the volume of the packed adsorbent.
Sekine, Ayako*; Suzuki, Yoshio*; Seko, Noriaki; Tamada, Masao
JAEA-Review 2006-042, JAEA Takasaki Annual Report 2005, P. 42, 2007/02
no abstracts in English
Kimura, Nobuyuki; Hayashi, Kenji; Kamide, Hideki; Ito, Masami*; Sekine, Tadashi*
Nuclear Technology, 152(2), p.210 - 222, 2006/03
Times Cited Count:21 Percentile:78.88(Nuclear Science & Technology)An innovative sodium cooled fast reactor has been investigated on the feasibility study of FBR cycle system in Japan. A compact reactor vessel (R/V) and a column type upper inner structure (UIS) with a radial slit for an arm of a fuel-handling machine (FHM) are adopted. Dipped plates (D/P) are set in the R/V below the free surface to prevent gas entrainment. We performed an 1/10th scaled model water experiment for the upper plenum of the R/V. Gas entrainment was not observed in the experiment under the same velocity condition as the reactor. Three vortex cavitations were observed near the hot leg (H/L) inlet. A vertical rib on the R/V wall was found inlet to restrict the rotating flow near the H/L. The vortex cavitation between the R/V wall and the H/L was suppressed by the rib under the same cavitation factor condition as in the reactor. The cylindrical plug was installed through the hole in the D/P for FHM to reduce the flow toward the free surface. It was effective when the plug was submerged into the middle height in the upper plenum. This combination of two components had a possibility to optimize the flow in the compact R/V.
Miwa, Shuhei; Osaka, Masahiko; Yoshimochi, Hiroshi; Tanaka, Kenya; Seki, Takayuki*; Sekine, Shinichi*
JNC TN9400 2005-023, 43 Pages, 2005/04
The effect of oxygen potential on the sintering behavior of MOX fuel containing Am (Am-MOX) was investigated. Green pellets of Am-MOX were prepared by a conventional powder metallurgical technique. For Am-MOX fuel pellets sintered at various oxygen potential conditions, density measurement, microstructural observation and elements analyses by EPMA were performed High density pellets having good structure were obtained due to oxygen potential change of sintering atmosphere from high oxygen potential to low oxygen potential at 800C in the cooling process.For the pellets sintered at -520 kJ/mol, -390 kJ/mol and -340 kJ/mol, the sintered density increases with increase of oxygen potential up to -390 kJ/mol (threshold oxygen potential), then decreases above the threshold oxygen potential. This tendency is similar to that observed in the (U,Gd)O
system. The differences of sintering behavior for Am-MOX pellets which were observed by changing the oxygen potential were attributable to the difference of pore structure, which was supposed to be caused by the valence state of Am in the oxides. On the other hands, the grain size of Am-MOX pellet sintered at -520 kJ/mol was almost the same as that at -390 kJ/mol. Homogeneous distribution of U, Pu and Am was obtained at pellets sintered both -520 and -390 kJ/mol in these sintering conditions. For the pellets sintered at 1500
C , 1600
C , 1700
C , the high dense pellets are obtained, therefore This results shows the the possibility of fabrication of good fuel pellets at lower temperature than 1700
C
Nakayama, Oukatsu; Kimura, Nobuyuki; Kamide, Hideki; Ito, Masami*; Sekine, Tadashi*
JNC TN9400 2005-032, 103 Pages, 2005/03
On the FBR feasibility study, an innovative sodium cooled fast reactor has been investigated in Japan Nuclear Cycle Development Institute. In order to reduce the construction cost of reactor, the compact reactor vessel is designed. Gas entrainment at the free surface is one of issues to be solved because of high velocity in the upper plenum vessel. We performed an 1/10th scaled model water experiment for the upper plenum of reactor vessel and investigated flow fields in the plenum in order to optimize flow. In the last experiment, we established flow optimization structures for reduction of flow toward to the free surface and restraint on the vortex cavitations near H/L inlet, i.e., plug into the dipped plate hole to install a fuel handling mechanism (FHM) and a flow splitter at vessel wall. In this report, effects of double dipped plates (D/Ps) and outer shell of upper inner structure (UIS) are investigated. In the result, we could confirm that the double D/P structure set below the free surface is effective to reduce flow toward the free surface between reactor vessel wall and guide tube of fuel transfer machine. An FHM plug, which has a step structure at mid height between double D/Ps, showed that it reduced flow velocity through the gap between the plug and the D/P. A perforated outer shell was set around the UIS to reduce vortex strength developed from the cold legs to the hot leg intake and also to restrain the vortex cavitation. It was shown that the onset condition of vortex cavitation at reactor vessel wall was reduced and the cavitation occurred easily. At the cold leg the onset condition of the caviation was not advanced. The flow distribution through the perforated outer shell should be optimized.
Osaka, Masahiko; Miwa, Shuhei; Mondo, Kenji; Ozaki, Yoko; Ishi, Yohei; Yoshimochi, Hiroshi; Seki, Takayuki*; Sekine, Shinichi*; Ishida, Takashi*; Tanaka, Kenya
JNC TN9400 2005-002, 40 Pages, 2005/03
An experimental investigation for the phase relation of (U,Pu,Am)O was performed with XRD, ceramography and DTA. Although lattice parameter tended to increase with increases of Am content and O/M ratio, its slope differed from that of (U,Pu)O
. A drastic structural change was observed around O/M=1.98. Besides, many DTA peaks, which could never be seen in the case of (U,Pu)O
, were observed above O/M=1.98.These results were interpreted with a hypothesis that all Am were trivalent and equivalent amount of U became pentavalent. The dependence of lattice parameter on Am content could be expressed well by using a model with ionic radii of each element. Also the structural change around O/M=1.98 could be explained as caused by valence states of each element. It was concluded from these interpretation that all Am in (U,Pu,Am)O
were likely to exist as trivalent state.
Kurihara, Masayoshi*; Hirata, Masaru; Sekine, Rika*; Onoe, Jun*; Nakamatsu, Hirohide*
Journal of Nuclear Materials, 326(2-3), p.75 - 79, 2004/03
Times Cited Count:12 Percentile:61.35(Materials Science, Multidisciplinary)We have investigated the alloying behavior of g-uranium with 3d transition metals (TMs) using the relativistic discrete-variational Dirac-Fock-Slater (DV-DFS) method. The d-orbital energy (Md) as an alloying parameter well reproduces the alloying behavior of g- uranium metal with TMs: (1) in the case of a large Md value (Ti,V,Cr), the solubility of these TM elements in g-uranium becomes large; (2) in the case of a middle Md value (Mn,Fe,Co), the tendency to form a uranium intermetallic compound with these elements becomes stronger; (3) in the case of a small Md value (Cu), the alloying element is insoluble in g-uranium. The alloying behavior of g-uranium with TMs is also discussed in terms of other parameters such as electronegativity and metallic radius.
Kimura, Nobuyuki; Hayashi, Kenji; Ito, Masami*; Sekine, Tadashi*; Igarashi, Minoru; Sato, Hiroyuki; Kamide, Hideki
JNC TN9400 2003-032, 214 Pages, 2003/03
An innovative sodium cooled fast reactor has been investigated on the FBR feasibility study. The design of the reactor is undergoing in order to reduce the construction cost of the reactor. For example, thermal output is increased against the reactor size and an upper inner structure (UIS) has a slit for the arm of the fuel-handling machine to simplify the fuel exchanging system. The dipped plates (D/P) are set below the free surface to prevent gas entrainment at free surface. We performed an 1/10th scaled model water experiment for the upper plenum of reactor vessel and investigated flow fields in the plenum in order to optimize flow. In the upper plenum, all of main components were set up as well as the reactor design. In addition, the D/P has a hole in front of the slit of the UIS to insert the fuel handling machine(FHM). As the experimental parameters, the core outlet velocity was varied from the condition of the Froude number similarity to the same value as the real reactor. The local velocity was measured by the particle image velocimetry and the ultrasound Doppler velocimetry. In the experimental results, gas entrainment at the free surface was not observed in the range from the Froude number similarity condition to the same velocity condition as the real reactor. However, the free surface was bulged on a large scale in front of the UIS slit. At the neighborhood of the H/L intake, three vortex cavitations were observed. The vortex cavitations were broken out under the same cavitation coefficient condition based on the H/L velocity as that in the real reactor. A vertical rib was set on the reactor vessel wall near the H/L inlet to restrict the rotating flow at the neighborhood of the H/L. As the result, the vortex cavitation at the region between the reactor vessel wall and the H/L was supressed under the same cavitation factor condition as the real reactor. A vertical cylinder, named FHM plug, was installed to close the hole in the D/P fbr FHM.
Koyama, Shinichi; Osaka, Masahiko; Sekine, Takashi; Morozumi, Katsufumi; Namekawa, Takushi;
Journal of Nuclear Science and Technology, 40(2), p.998 - 1013, 2003/02
Times Cited Count:23 Percentile:80.59(Nuclear Science & Technology)None
Kimura, Nobuyuki; Hayashi, Kenji; Igarashi, Minoru; Kamide, Hideki; Ito, Masami*; Sekine, Tadashi*
Proceedings of 10th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-10), CD-RO, K0102 Pages, 2003/00
An innovative sodium cooled fast reactor has been investigated on the feasibility study of FBR cycle system in JNC. A compact reactor vessel (R/V) and a column type upper inner structure (UIS) with a radial slit for an arm of a fuel-handling machine (FHM) are adopted. Dipped plates (D/P) are set in the R/V below the free surface to prevent gas entrainment at free surface. We performed an 1/10th scaled model water experiment for the upper plenum of the R/V. Gas entrainment at the free surface was not observed in the experiment under the same velocity condition as the designed reactor. However, the free surface rose in front of the UIS slit due to upward flow through the gap between the D/P and the R/V wall. The upward flow will cause free surface vortex and also the gas entrainment. Three vortex cavitations were observed near the hot leg (H/L) inlet. The vortex cavitations were broken out under the same cavitation factor condition as the reactor. A vertical rib was set on the R/V wall
Watanabe, Satoshi; Ishioka, Noriko; Osa, Akihiko; Koizumi, Mitsuo; Sekine, Toshiaki; Kiyomiya, Shoichiro*; Nakanishi, Hiromi*; Mori, Satoshi*
Radiochimica Acta, 89(11-12), p.853 - 858, 2002/02
Times Cited Count:17 Percentile:74.75(Chemistry, Inorganic & Nuclear)no abstracts in English
Inoue, Masaki; ; ; ; Sekine, Takashi; Osaka, Masahiko
Journal of Nuclear Materials, 323(1), p.108 - 122, 2002/00
Times Cited Count:10 Percentile:56.31(Materials Science, Multidisciplinary)None
Bughio, N.*; Nakanishi, Hiromi*; Kiyomiya, Shoichiro*; Matsuhashi, Shimpei; Ishioka, Noriko; Watanabe, Satoshi; Uchida, Hiroshi*; Tsuji, Atsunori*; Osa, Akihiko; Kume, Tamikazu; et al.
Planta, 213(5), p.708 - 715, 2001/09
Times Cited Count:16 Percentile:36.71(Plant Sciences)[C]Methionine ([
C]Met) was supplied through barley roots and the
C signal was follwoed using a real-time imaging system (PETIS), with subsequent development of autoradiographic images of the whole plant. In all cases, [
C]Met was first translocated to the discrimination center, and this part was strongly labeled. Met absorbed by roots of the plants was subsequently translocated to other parts of the plant. In Fe-deficient (-Fe) barley plants, a drastic reduction in [
C]Met translocation from the roots to the shoot was observed, while a greater amount of
C was found in the leaves of Fe-sufficient or Met-pretreated -Fe plants. Treatment of -Fe plants with amiooxyacetic acid increased the translocation of [
C]Met to the shoot. The retention of exogenously supplied [
C]Met in the roots of -Fe barley indicates that the Met is used in the biosynthesis of mugineic acid (MA) in barley roots. This and the absence of Met movement from shoots to the roots suggest that the MA phytosiderophores precursor Met originates in the roots of plants.