Modeling the extraction of bound rubber from silica-filled styrene-butadiene rubber with toluene

Tamura, Yukiko*; Arakawa, Masato*; Takenaka, Mikihito*; Nakanishi, Yohei*; Fujinami, So*; Shibata, Motoki*; Yamamoto, Katsuhiro*; Miyata, Noboru*; Yamada, Masako*; Seto, Hideki*; et al.

Polymer, 333, p.128662_1 - 128662_8, 2025/08

https://doi.org/10.1016/j.polymer.2025.128662

Neutron reflectometry study on the interfacial layer of epoxy resin to improve adhesion strength

Liu, Y.*; Miyata, Noboru*; Miyazaki, Tsukasa*; Shundo, Atsuomi*; Kawaguchi, Daisuke*; Tanaka, Keiji*; Aoki, Hiroyuki

ACS Applied Materials & Interfaces, 17(25), p.37311 - 37318, 2025/06

https://dx.doi.org/10.1021/acsami.5c07863

Development of a bio-based adhesive by polymerization of Boc-protected vinyl catechol derived from caffeic acid

Tanizaki, Shiho*; Kubo, Tomohiro*; Bito, Yosuke*; Mori, Shigeki*; Aoki, Hiroyuki; Sato, Kotaro*

RSC Sustainability (Internet), 3(4), p.1714 - 1720, 2025/04

https://doi.org/10.1039/D4SU00629A

Surface depth analysis of chemical changes in random copolymer thin films composed of hydrophilic and hydrophobic silicon-based monomers induced by plasma treatment as studied by hard X-ray photoelectron spectroscopy and neutron reflectivity measurements

Yamamoto, Katsuhiro*; Imai, Tatsuya*; Kawai, Atsuki*; Ito, Eri*; Miyazaki, Tsukasa*; Miyata, Noboru*; Yamada, Norifumi*; Seto, Hideki*; Aoki, Hiroyuki

ACS Applied Materials & Interfaces, 16(48), p.66782 - 66791, 2024/11

https://doi.org/10.1021/acsami.4c17393

Stability enhancement by hydrophobic anchoring and a cross-linked structure of a phospholipid copolymer film for medical devices

Uchida, Kazuto*; Masuda, Tsukuru*; Hara, Shintaro*; Matsuo, Yoichi*; Liu, Y.*; Aoki, Hiroyuki; Asano, Yoshihiko*; Miyata, Kazuki*; Fukuma, Takeshi*; Ono, Toshiya*; et al.

ACS Applied Materials & Interfaces, 16(30), p.39104 - 39116, 2024/07

https://doi.org/10.1021/acsami.4c07752

In-plane movement of isolated poly(methacrylate) chains on a hydrophilic solid surface

Kawano, Masayuki*; Morimitsu, Yuma*; Liu, Y.*; Miyata, Noboru*; Miyazaki, Tsukasa*; Aoki, Hiroyuki; Kawaguchi, Daisuke*; Yamamoto, Satoru*; Tanaka, Keiji*

Macromolecules, 57(14), p.6625 - 6633, 2024/07

https://doi.org/10.1021/acs.macromol.4c00724

Hydrogenation of silicon-bearing hexagonal close-packed iron and its implications for density deficits in the inner core

Mori, Yuichiro*; Kagi, Hiroyuki*; Aoki, Katsutoshi*; Takano, Masahiro*; Kakizawa, Sho*; Sano, Asami; Funakoshi, Kenichi*

Earth and Planetary Science Letters, 634, p.118673_1 - 118673_8, 2024/05

https://doi.org/10.1016/j.epsl.2024.118673

To investigate silicon effects on the hydrogen-induced volume expansion of iron, neutron diffraction and X-ray diffraction experiments were conducted to examine hcp-FeSi under high pressures and high temperatures. Neutron diffraction experiments were performed on the deuterated hcp-FeSi at 13.5 GPa and 900 K, and at 12.1 GPa and 300 K. By combining the P-V-T equation of state of hcp-FeSi, present results indicate that the hydrogen-induced volume expansion of hcp-FeSi is 10% greater than that of pure hcp iron. Using the obtained values, we estimated the hydrogen content that would reproduce the density deficit in the inner core, which was 50% less than that without the effect of silicon. Possible hydrogen content, , in the inner core and the outer core was calculated to be 0.07 and 0.12-0.15, respectively, when reproducing the density deficit of the inner core with hcp-FeSiHx.

Low reactivity of stoichiometric FeS with hydrogen at high-pressure and high-temperature conditions

Takano, Masahiro*; Kagi, Hiroyuki*; Mori, Yuichiro*; Aoki, Katsutoshi*; Kakizawa, Sho*; Sano, Asami; Iizuka-Oku, Riko*; Tsuchiya, Taku*

Journal of Mineralogical and Petrological Sciences (Internet), 119(1), p.240122_1 - 240122_9, 2024/00

https://doi.org/10.2465/jmps.240122

Hydrogenation of iron sulfide (FeS) under high-pressure and high-temperature conditions has attracted attention because hydrogen and sulfur are promising candidates as light elements in the cores of the Earth and other terrestrial planets. In earlier reports describing the hydrogenation of FeS, the chemical compositions of starting materials were not fully clarified. This study reports in-situ neutron and X-ray diffraction measurements under high-pressure and high-temperature conditions of an Fe-S-H system using a stochiometric Fe1.000S (troilite) as a starting material. The occupancies determined were significantly lower than those reported from earlier studies, indicating that the hydrogenation of FeS can be affected strongly by the stoichiometry of iron sulfide.

Microphase separation of cationic homopolymers bearing alkyl ammonium salts into sub-4 nm lamellar materials with water intercalation channels

Sujita, Ryota*; Imai, Sahori*; Ouchi, Makoto*; Aoki, Hiroyuki; Terashima, Takaya*

Macromolecules, 56(23), p.9738 - 9749, 2023/12

https://doi.org/10.1021/acs.macromol.3c01722

Strain-induced crystallization and phase separation used for fabricating a tough and stiff slide-ring solid polymer electrolyte

Hashimoto, Kei*; Shiwaku, Toru*; Aoki, Hiroyuki; Yokoyama, Hideaki*; Mayumi, Koichi*; Ito, Kozo*

Science Advances (Internet), 9(47), p.eadi8505_1 - eadi8505_8, 2023/11

https://doi.org/10.1126/sciadv.adi8505