検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 18 件中 1件目~18件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys

Wei, D.*; Gong, W.; 都留 智仁; Lobzenko, I.; Li, X.*; Harjo, S.; 川崎 卓郎; Do, H.-S.*; Bae, J. W.*; Wagner, C.*; et al.

International Journal of Plasticity, 159, p.103443_1 - 103443_18, 2022/12

 被引用回数:12 パーセンタイル:98.45(Engineering, Mechanical)

Face-centered cubic single-phase high-entropy alloys (HEAs) containing multi-principal transition metals have attracted significant attention, exhibiting an unprecedented combination of strength and ductility owing to their low stacking fault energy (SFE) and large misfit parameter that creates severe local lattice distortion. Increasing both strength and ductility further is challenging. In the present study, we demonstrate via meticulous experiments that the CoCrFeNi HEA with the addition of the substitutional metalloid Si can retain a single-phase FCC structure while its yield strength (up to 65%), ultimate strength (up to 34%), and ductility (up to 15%) are simultaneously increased, owing to a synthetical effect of the enhanced solid solution strengthening and a reduced SFE. The dislocation behaviors and plastic deformation mechanisms were tuned by the addition of Si, which improves the strain hardening and tensile ductility. The present study provides new strategies for enhancing HEA performance by targeted metalloid additions.

論文

Metalloid substitution elevates simultaneously the strength and ductility of face-centered-cubic high-entropy alloys

Wei, D.*; Wang, L.*; Zhang, Y.*; Gong, W.; 都留 智仁; Lobzenko, I.; Jiang, J.*; Harjo, S.; 川崎 卓郎; Bae, J. W.*; et al.

Acta Materialia, 225, p.117571_1 - 117571_16, 2022/02

 被引用回数:46 パーセンタイル:99.77(Materials Science, Multidisciplinary)

Recently-developed high-entropy alloys (HEAs) containing multiple principal metallic elements have ex-tended the compositional space of solid solutions and the range of their mechanical properties. Here we show that the realm of possibilities can be further expanded through substituting the constituent metals with metalloids, which are desirable for tailoring strength/ductility because they have chemical interactions and atomic sizes distinctly different from the host metallic elements. Specifically, the metalloid substitution increases local lattice distortion and short-range chemical inhomogeneities to elevate strength, and in the meantime reduces the stacking fault energy to discourage dynamic recovery and encourage defect accumulation via partial-dislocation-mediated activities. These impart potent dislocation storage to improve the strain hardening capability, which is essential for sustaining large tensile elongation. As such, metalloid substitution into HEAs evades the normally expected strength-ductility trade-off, enabling an unusual synergy of high tensile strength and extraordinary ductility for these single-phase solid solutions.

論文

Effect of the difference in strength of hard and soft components on the synergetic strengthening of layered materials

Kim, J. G.*; Bae, J. W.*; Park, J. M.*; Woo, W.*; Harjo, S.; Lee, S.*; Kim, H. S.*

Metals and Materials International, 27(2), p.376 - 383, 2021/02

 被引用回数:6 パーセンタイル:47.92(Materials Science, Multidisciplinary)

Heterogeneous structured materials achieve a combination of high strength and extreme ductility due to synergetic strengthening driven by conditions in the interfacial region. Although the origin of synergetic strengthening has been revealed to be strain incompatibility in the interfacial region, the effect of the strength difference between hard and soft phases on strengthening has not been investigated well. In the work reported in the present paper, the effect of the difference in strength of the hard and soft phases on synergetic strengthening was investigated by conducting in situ neutron diffraction tensile tests. As a result, it was determined that the dislocation density in a layered sheet of high Mn (HMn) steel/interstitial free (IF) steel is higher than that in a layered sheet of HMn/low carbon steel. The big difference in mechanical properties between HMn steel and IF steel induces a high stress gradient and results in additional dislocations.

論文

On the phase transformation and dynamic stress-strain partitioning of ferrous medium-entropy alloy using experimentation and finite element method

Bae, J. W.*; Jung, J.*; Kim, J. G.*; Park, J. M.*; Harjo, S.; 川崎 卓郎; Woo, W.*; Kim, H. S.*

Materialia, 9, p.100619_1 - 100619_15, 2020/03

In the present study, an integrated experimental-numerical analysis on ferrous medium-entropy alloy (FMEA) was conducted to understand the micromechanical response of the constituent phases in the FMEA at -137$$^{circ}$$C. The initial face-centered cubic (FCC) single phase microstructure of the FMEA was transformed to body-centered cubic (BCC) martensite during tensile deformation at -137$$^{circ}$$C, resulting in improved low-temperature mechanical properties. The microstructure evolution due to deformation-induced phase transformation mechanism and strain partitioning behavior was analyzed using ${it ex situ}$ electron backscatter diffraction. The mechanical responses related to the stress partitioning between constituent phases and deformation-induced transformation rate were measured using ${it in situ}$ neutron diffraction in combination with the nanoindentation analysis.

論文

Synergetic strengthening of layered steel sheet investigated using an ${it in situ}$ neutron diffraction tensile test

Kim, J. G.*; Bae, J. W.*; Park, J. M.*; Woo, W.*; Harjo, S.; Chin, K.-G.*; Lee, S.*; Kim, H. S.*

Scientific Reports (Internet), 9, p.6829_1 - 6829_7, 2019/05

 被引用回数:10 パーセンタイル:49.14(Multidisciplinary Sciences)

Synergetic strengthening induced by plastic strain incompatibility at the interface, and the resulting extra geometrically necessary dislocations (GNDs) generated during plastic deformation, were investigated to understand the origin of extra strength in heterogeneous structured (Hs) materials. The mechanism of extra GND generation in twinning-induced plasticity (TWIP)-interstitial free (IF) steel layered sheet was quantitatively analyzed by conducting ${it in situ}$ neutron scattering tensile test. The extra GNDs can be correlated with the back-stress evolution of the HS materials, which contributes to the strength of layered materials. Because of the back-stress evolution caused by load partitioning, the strength of TWIP-IF layered steel is higher than the strength estimated by the rule-of-mixtures.

論文

${it In situ}$ neutron diffraction study of phase stress evolution in a ferrous medium-entropy alloy under low-temperature tensile loading

Bae, J. W.*; Kim, J. G.*; Park, J. M.*; Woo, W.*; Harjo, S.; Kim, H. S.*

Scripta Materialia, 165, p.60 - 63, 2019/05

 被引用回数:20 パーセンタイル:80.06(Nanoscience & Nanotechnology)

Phase stress evolution of face-centered cubic (FCC) and deformation-induced body-centered cubic (BCC) phases was measured in recently developed ferrous medium-entropy alloy. This was done during tensile deformation at -137$$^{circ}$$C using ${it in situ}$ neutron diffraction measurement for the quantitative interpretation of the role of martensitic transformation on the improved low-temperature tensile properties. The strain-hardening rate curve exhibits two-stage hardening behavior, and the phase stress and stress contribution from the BCC phase increases significantly while that from FCC phase decreases during plastic deformation. This is a direct demonstration that BCC phase contributes significantly to the increase in strength and strain hardening.

論文

Characteristics of global energy confinement in KSTAR L- and H-mode plasmas

Kim, H.-S.*; Jeon, Y. M.*; Na, Y.-S.*; Ghim, Y.-C.*; Ahn, J.-W.*; Yoon, S. W.*; Bak, J. G.*; Bae, Y. S.*; Kim, J. S.*; Joung, M.*; et al.

Nuclear Fusion, 54(8), p.083012_1 - 083012_11, 2014/08

 被引用回数:8 パーセンタイル:37.82(Physics, Fluids & Plasmas)

KSTARのLモードおよびHモードプラズマにおいてエネルギー閉じ込め特性を定量的に評価し、多変数回帰解析を行い多装置スケーリング則と比較した。解析したKSTARプラズマのエネルギー閉じ込め時間はLモードで0.04-0.16秒、Hモードで0.06-0.19秒の範囲にある。多変数回帰解析によると、閉じ込め時間は多装置スケーリング則と比較して損失パワーに関しては同程度の、プラズマ電流に関してはわずかに強い依存性が見られた。一方で、非円形度に関しては多装置スケーリング則が正の冪乗依存性を示すのに対してKSTARでは負の冪乗依存性を示した(Lモードで-0.68乗、Hモードで-0.76乗)。KSTARでは非円形度の増加と共にダイバータ足位置が移動するため、不純物の混入量が増加して閉じ込めを劣化させているなどの原因が考えられる。

論文

Development of high voltage power supply for the KSTAR 170 GHz ECH and CD system

Jeong, J. H.*; Bae, Y. S.*; Joung, M.*; Kim, H. J.*; Park, S. I.*; Han, W. S.*; Kim, J. S.*; Yang, H. L.*; Kwak, J. G.*; 坂本 慶司; et al.

Fusion Engineering and Design, 88(5), p.380 - 387, 2013/06

 被引用回数:3 パーセンタイル:25.83(Nuclear Science & Technology)

A 3.6 MW DC power supply system was developed for the 170 GHz EC H&CD system in KSTAR. It consists of a cathode power supply (CPS), an anode power supply (APS) and a body power supply (BPS). The CPS is capable of supplying a voltage of -66 kV and a current of 55 A to the cathode with respect to the collector using pulse step modulation (PSM). The APS is a voltage divider system consisting of a fixed resistor and zener diode units with the capability of 60 kV stand-off voltage. For high frequency current modulation, the parallel discharge switch is introduced between the cathode and anode. The BPS is a DC power supply with 50 kV/160 mA. The series MOS-FET solid-state switch is used for on/off modulation in the body voltage sychronizing with anode voltage. The parallel discharge switch is also introduced between the body and collector for high frequency RF modulation. This paper describes the key features of the high voltage power supply system as well as the test results.

論文

First neutral beam injection experiments on KSTAR tokamak

Jeong, S. H.*; Chang, D. H.*; Kim, T. S.*; In, S. R.*; Lee, K. W.*; Jin, J. T.*; Chang, D. S.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Review of Scientific Instruments, 83(2), p.02B102_1 - 02B102_3, 2012/02

 被引用回数:22 パーセンタイル:68.17(Instruments & Instrumentation)

KSTAR用中性粒子入射装置全体の1/3が2010年に完成し、入射実験を行った。この装置のイオン源は、原子力機構のプラズマ源とKAERIの多孔型加速電極で構成されている。入射実験前にイオン源の特性を調べ、ビーム発散角が0.8度、イオン組成比D$$^{+}$$/D$$_{2}$$$$^{+}$$/D$$_{3}$$$$^{+}$$が75:20:5、アーク効率1.0A/kWと良好な特性を確認した。KSTARへの入射実験では、0.7-1.5MWを70-90keVのエネルギーで入射した。プラズマのLモードからHモードへの遷移を確認でき、D-D反応による中性子発生を観測し、イオン温度とプラズマ閉じ込めエネルギーの上昇を観測した。

論文

Characteristics of the first H-mode discharges in KSTAR

Yoon, S. W.*; Ahn, J.-W.*; Jeon, Y. M.*; 鈴木 隆博; Hahn, S. H.*; Ko, W. H.*; Lee, K. D.*; Chung, J. I.*; Nam, Y. U.*; Kim, J.*; et al.

Nuclear Fusion, 51(11), p.113009_1 - 113009_9, 2011/11

 被引用回数:33 パーセンタイル:79.19(Physics, Fluids & Plasmas)

中性粒子ビーム(NB)と電子サイクロトロン(EC)加熱を組合せることでKSTARトカマクにおいてELMを有する典型的なHモード放電を得た。2Tのトロイダル磁場では、Hモード遷移に必要な閾パワーは最小で1.1MWであり密度は1.4$$times$$10$$^{19}$$ m$$^{-3}$$であった。この密度以下では閾パワーは増加した。閉じ込め時間はスケーリング則より1.4-1.6倍高いが、NBの損失を考慮するとスケーリング則に近づく。Hモード時には電子温度とイオン温度がペデスタル部で明確に上昇したが、中心部のイオン温度は大きくは変化しなかった。他方、トロイダル回転はHモード時に全領域で増加した。ELM周波数は30-50HzでELM時の蓄積エネルギーの変化割合は5%以下であった。NBとEC加熱を組合せた場合には、大振幅のELM間に小振幅のELMが観測された。

論文

Arc discharge characteristics of a long pulse ion source for the KSTAR neutral beam injector

Chang, D. H.*; Jeong, S. H.*; Jin, J. T.*; Chang, D. S.*; Kim, T. S.*; Lee, K. W.*; In, S. R.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Journal of the Korean Physical Society, 59(2), p.275 - 280, 2011/08

 被引用回数:3 パーセンタイル:27.61(Physics, Multidisciplinary)

KSTARの中性粒子入射装置(NBI)に向けて長パルスイオン源を開発し、イオン源のアーク放電特性を調べた。イオン源は、多極磁場型バケットタイプのプラズマ源と多数の円孔を配置した4枚のビーム加速電極から成る加速器で構成されている。安定で効率の良いアーク放電プラズマをアーク電源の一定パワーモード運転にて70kWまで生成することに成功した。アーク放電の安定な運転領域について、フィラメント加熱電圧,アーク電力、そして導入重水素ガスの量の変化に関して調べた。

論文

Results of beam extraction performance for the KSTAR neutral beam injector

Chang, D. H.*; Jeong, S. H.*; Kim, T. S.*; Lee, K. W.*; In, S. R.*; Jin, J. T.*; Chang, D. S.*; Oh, B. H.*; Bae, Y. S.*; Kim, J. S.*; et al.

Japanese Journal of Applied Physics, 50(6), p.066302_1 - 066302_7, 2011/06

 被引用回数:10 パーセンタイル:44.1(Physics, Applied)

KSTARにおいて初めての中性粒子入射装置が据え付けられ運転された。85kVで32Aのビームを5秒間安定に引出すことができた。さらに80kV25Aでは14秒の長パルス運転が達成された。最適なパービアンスは1.15マイクロパービアンスであることが確認できた。中性化効率も偏向磁石を使用して熱的カロリメータで測定した。アーク効率は0.6$$sim$$1.1A/kWの高い値が得られた。中性粒子ビームパワーとしては80keVのエネルギーで1.0MWがKSTARプラズマに入射できた。

論文

Development of a plasma generator for a long pulse ion source for neutral beam injectors

渡邊 和弘; 大楽 正幸; 戸張 博之; 柏木 美恵子; 井上 多加志; 花田 磨砂也; Jeong, S. H.*; Chang, D. H.*; Kim, T. S.*; Kim, B. R.*; et al.

Review of Scientific Instruments, 82(6), p.063507_1 - 063507_6, 2011/06

 被引用回数:15 パーセンタイル:59.08(Instruments & Instrumentation)

中性粒子入射装置(NBI)のための長パルスイオン源用プラズマ源を開発した。このプラズマ源はビーム出力120keV, 65A出力を目標として設計したものであり、ビーム引出面12cm$$times$$46cmの大きな領域を有した多極磁場型プラズマ源である。プラズマ源の外側をサマリウムコバルト永久磁石で囲みカスプ磁場配位とした。本プラズマ源を日韓協力の下、韓国のKSTAR NBIテストスタンドに取付け長パルス試験を行った。その結果、ビーム電流65Aを生成できるアーク放電パワー70kWで200秒間のプラズマ生成運転に成功し、長パルス性能を実証した。ビーム引出部のプラズマの空間的一様性については、イオン飽和電流の平均値からのばらつきが$$pm$$8%以下であることを確認でき、大面積に一様なプラズマが生成できることを確認した。また、ビーム引き出し試験においては、73kV, 41A, 5秒までの生成に成功し、0.9-1.1A/kWの高いアーク効率を確認できた。これらによって本プラズマ源の長パルス性能を確認できた。

論文

Commissioning results of the KSTAR neutral beam system

Bae, Y. S.*; Park, Y. M.*; Kim, J. S.*; Han, W. S.*; Kwak, S. W.*; Chang, Y. B.*; Park, H. T.*; Song, N. H.*; Chang, D. H.*; Jeong, S. H.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 9 Pages, 2011/03

中性粒子入射(NBI)システムは、韓国超伝導トカマク先進研究装置(KSTAR)における高性能運転と長パルス運転のためのイオン加熱と電流駆動を行うように設計された。KSTAR用NBIは2つのビームラインで構成されている。各々のビームラインはイオン源1台あたり最大ビームエネルギー120keVで重水素中性粒子ビームパワー2.5MW以上を入射できるよう設計されたイオン源を3台内蔵している。したがって、KSTAR用NBIシステムの最終目標は2つのビームラインで重水素中性粒子ビームパワー14MW以上の入射を目指している。NBIシステムの計画に則り、各々のコンポーネントとサブシステムの試運転を含めた2010年活動においては、最初のNBIシステムにより、KSTARトカマク・プラズマへ1台のイオン源からビーム入射を行うことである。この論文では、1台のイオン源を用いた最初のNBIシステムの建設と調整運転について紹介する。

論文

Status and result of the KSTAR upgrade for the 2010's campaign

Yang, H. L.*; Kim, Y. S.*; Park, Y. M.*; Bae, Y. S.*; Kim, H. K.*; Kim, K. M.*; Lee, K. S.*; Kim, H. T.*; Bang, E. N.*; Joung, M.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2011/03

韓国超伝導トカマク先進研究装置(KSTAR)における高楕円度でダイバータ配位を有するプラズマ生成を目指した2010年の運転のため、プラズマ形状制御に不可欠なハードウェア・システムが新たに据え付けられ改良された。この論文では、改良されたシステムの一般的な構成の概要を述べる。さらに、システムにおいてキーとなる幾つかの性能と試験結果についても報告する。

論文

ECRH assisted plasma start-up with toroidally inclined launch; Multi-machine comparison and perspectives for ITER

Stober, J.*; Jackson, G. L.*; Ascasibar, E.*; Bae, Y.-S.*; Bucalossi, J.*; Cappa, A.*; Casper, T.*; Cho, M. H.*; Gribov, Y.*; Granucci, G.*; et al.

Proceedings of 23rd IAEA Fusion Energy Conference (FEC 2010) (CD-ROM), 8 Pages, 2010/10

ECRH assisted plasma breakdown is foreseen with full and half magnetic field in ITER. As reported earlier, the corresponding O1- and X2-schemes have been successfully used for pre-ionisation and breakdown assist in present day devices. This contribution reports on common experiments studying the effect of toroidal inclination of the ECR beam, which is $$ge 20^circ$$ in ITER. All devices could demonstrate successful breakdown assist also for this case, although in some experiments the necessary power was almost a factor of two higher compared to perpendicular launch. Differences between the devices with regard to the required power and vertical field are discussed and analysed. In contrast to most of these experiments, ITER will build up loop voltage prior to the formation of the field null due to the strong shielding by the vessel. Possible consequences of this difference are discussed.

論文

Status of KSTAR electron cyclotron heating system

Bae, Y. S.*; Na, Y. S.*; Oh, Y. K.*; Kwon, M.*; Bak, J. S.*; Lee, G. S.*; Jeong, J. H.*; Park, S. I.*; Cho, M. H.*; Namkung, W.*; et al.

Fusion Science and Technology, 52(2), p.321 - 333, 2007/08

 被引用回数:23 パーセンタイル:81.85(Nuclear Science & Technology)

84GHz, KSTAR電子サイクロトロン波加熱システムにおいてジャイロトロンの実験を開始し、これまでに20$$mu$$secのパルス発振に成功した。また、入射アンテナ(ランチャー)を設計製作し、KSTAR装置に取り付けプラズマ実験が行える状況にある。また、ITERを想定したNTM制御あるいは内部輸送障壁生成を目的とした170GHz電子サイクロトロン波加熱システム開発を行っているが、原子力機構がITER用に開発した170GHz, 1MWジャイロトロンを設置する予定となっている。本論文では、KSTARにおける84GHz及び170GHzジャイロトロンシステム開発を述べるとともに、それらを利用した電流駆動やXモード入射についても議論する。

口頭

Confinement characteristics of the extended operation regime of KSTAR toward advanced scenarios

Na, Y. S.*; 鈴木 隆博; 井手 俊介; Mueller, D.*; Kim, J. H.*; 宮田 良明; Kim, S. H.*; Kim, H. S.*; Jeon, Y. M.*; Bae, Y. S.*; et al.

no journal, , 

KSTARプロジェクトの重要な実験目標である先進シナリオ開発を開始した。プラズマ電流立ち上げ初期にダイバータ配位を形成し、その後に加熱を行いつつ電流を立ち上げることで先進シナリオに適した鋸歯状不安定性のないターゲットプラズマの生成に成功した。さらにこのプラズマに対して、高いポロイダルベータ値と自発電流割合を得て磁気シアを変化させるためにJET装置で用いられている「Ipオーバーシュート」法を適用した。これら一連のプラズマについて、平衡及び輸送と加熱・電流駆動を考慮した統合シミュレーションコードを用いて閉じ込めと輸送特性を調べた。プラズマ電流立ち上げ中の安全係数、電流立ち上げ後の閉じ込め特性、自発電流を含む非誘導駆動電流について議論する。また、これらのプラズマを他のトカマク装置で開発された先進シナリオと比較し、今後のKSTAR先進シナリオ開発の方向性も議論する。

18 件中 1件目~18件目を表示
  • 1