検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 3 件中 1件目~3件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

口頭

Strain measurement of aged duplex stainless steel using SR white X-ray

桐山 幸治; 菖蒲 敬久; 柴野 純一*; 藤城 智之; 金子 洋; 三浦 節男*

no journal, , 

Many X-ray reflections from a duplex stainless steel (DSS) have been measured for estimation of lattice strains under tensile loading using by the synchrotron radiation white X-ray. The results showed that some lattice strains were responded nonlinearly at around 1600 micro strain, and that an other some lattice strains were oscillated with increasing applied strain. Moreover, the lattice strains on a-phase fluctuated in comparison with those on r-phase. Some oscillated reflections correspond with slip planes, ${111}$, ${112}$, ${123}$ for a-Fe and ${111}$ for r-Fe. These suggest that, although the applied strains were under the range of elastic deformation, plastic deformation has probably got started on local grains which have specific reflections. Different tendency of lattice strains between a-phase and r-phase means that age hardening are more progressed on r-phase than a-phase of the DSS.

口頭

放射光を用いた高温高圧水中その場ひずみ分布測定

藤城 智之; 菖蒲 敬久; 寺澤 倫孝*; 山本 厚之*; 桐山 幸治*; 中東 重雄*; 長谷川 忠之*

no journal, , 

軽水炉の炉心シュラウドや再循環系配管では、応力腐食割れによる運転停止が幾度となく発生している。そのため、SCCに関する研究がさまざまな方面から行われてきているが、実環境下においてSCCき裂が進展する際のき裂先端部の応力,結晶粒方位などを明らかにすることはその機構解明に大変重要であると考えられる。そこで本研究では、原子力発電プラント雰囲気を模擬したオートクレーブ中の試験片のひずみの時間変化が十分な分解能で計測可能かどうかを検討した。試験片には、炉心シュラウドとして近年利用されているSUS316LよりもSCCが発生しやすいSUS316を使用し、原子力発電プラント雰囲気(288$$^{circ}$$C, 8.8MPa)を模擬したオートクレーブに試料降伏点以下の引張応力260Nを負荷した状態で設置した。その結果、オートクレーブを使用することにより、SUS316特有の応力腐食割れが発生していることをオフラインによるSEM観察で確認した。一方、高温高圧水中その場測定から、環境ごとの格子面間隔の変化を観測し、さらに時効効果と考えられるひずみ分布の観測に成功した。

口頭

Internal strain distribution of laser peened Ti-alloy rod studied by high energy synchrotron radiation X-rays

菖蒲 敬久; 秋田 貢一; 城 鮎美; 藤城 智之*; 桐山 幸治*; 熊谷 正芳*; 久森 紀之*

no journal, , 

Ti-6Al-4V has excellent corrosion resistance and specific strength, therefore it is widely used for mechanical components. In this study, laser peening was applied to the Ti-alloy rod to improve fatigue strength of the material and internal distributions of residual strain in the rod were measured non-destructively by synchrotron radiation X-ray diffraction technique. On the surface, strains of axial and radial directions were compressive and tensile, respectively. On the other hand, strain of axial direction was tensile and strain of radial direction was low around zero in central region, respectively. The depth introducing compressive strain of axial direction of two specimens was 1 mm. The axial tensile strain increased with a decrease of the diameter of specimen. This indicates that the probability of the internal cracking may be increased with decreasing the diameter of the fatigue specimen.

3 件中 1件目~3件目を表示
  • 1