検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 336 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

報告書

ホットラボ排気筒の基本設計

森田 寿; 大伍 史久; 佐谷戸 夏紀; 綿引 俊介; 小島 一樹; 中山 一彦; 井手 広史

JAEA-Technology 2021-030, 166 Pages, 2022/05

JAEA-Technology-2021-030.pdf:3.65MB

平成27年1月にJMTRホットラボ建家において雨漏れ補修を行っていたところ、ホットラボ排気筒の基礎部アンカーボルト1本に減肉が確認された。その後の排気筒における詳細調査により、複数のアンカーボルトの減肉及びフランジプレートとアンカーボルトのナットに間隙が確認されたことを受け、排気筒の倒壊が否定できない状態であると判断されたため、排気筒の撤去を行った。そのため、早急に当該排気筒の取替えを行う必要が生じた。新たな排気筒の設計を行うにあたり、詳細調査により判明したアンカーボルトの減肉等の原因である基礎部への雨水の浸入への対策に加え、東京電力福島第一原子力発電所の事故後に策定された新規制基準への対応を踏まえた設計とした。また、建築確認を受けなければならない建築物及び工作物に該当することから、建築基準法及び煙突構造設計指針に基づく地震力や風荷重に対する排気筒の健全性の評価を行った。本報告書はホットラボ排気筒の基本設計についてまとめたものである。

論文

Development of operation scenarios for plasma breakdown and current ramp-up phases in JT-60SA tokamak

浦野 創; 藤田 隆明*; 井手 俊介; 宮田 良明; 松永 剛; 松川 誠

Fusion Engineering and Design, 100, p.345 - 356, 2015/11

 被引用回数:14 パーセンタイル:79.67(Nuclear Science & Technology)

JT-60SAにおけるプラズマ着火及び電流立ち上げシナリオを開発した。真空容器や安定化板等の容器内導体構造物に発生する渦電流はプラズマ着火直後のプラズマ電流値($$sim600$$kA)程度にまで増加し、誤差磁場を強める働きをする。100%及び50%の初期励磁において着火条件を満足するシナリオを作成した。プラズマ位置制御のためには垂直磁場を生成する必要があるが、初期プラズマでは渦電流による逆方向の垂直磁場が大きいため、これを打ち消すための外側コイル電流の最適化を行った。プラズマ電流と鎖交磁束で決まるダイバータ配位への移行条件を検討し、初期励磁から着火、電流立ち上げ、ダイバータ移行をスムーズにつなぐ運転シナリオを作成した。

論文

In-vessel coils for magnetic error field correction in JT-60SA

松永 剛; 武智 学; 櫻井 真治; 鈴木 康浩*; 井手 俊介; 浦野 創

Fusion Engineering and Design, 98-99, p.1113 - 1117, 2015/10

 被引用回数:14 パーセンタイル:77.78(Nuclear Science & Technology)

JT-60SA is designed and under construction as fully superconducting tokamak under a combined project of the ITER satellite tokamak program of EU-JA (Broader Approach Activities) and the Japanese national program. One of the main purposes of JT-60SA is the steady-state high-beta operation above the ideal no-wall beta limit. To achieve this, we have designed in-vessel coils, thus error filed correction coils (EFCCs) for a correction of magnetic error fields that affect plasma initiation and induce magnetic island locking. We will report the design of the EFCC in JT-60SA from an engineering and a physics points of view.

論文

Integrated tokamak modelling with the fast-ion Fokker-Planck solver adapted for transient analyses

藤間 光徳; 濱松 清隆; 林 伸彦; 本多 充; 井手 俊介

Plasma Physics and Controlled Fusion, 57(9), p.095007_1 - 095007_9, 2015/09

 被引用回数:4 パーセンタイル:18.72(Physics, Fluids & Plasmas)

全放電時間を模擬するトカマク統合モデリングは先進トカマクプラズマ設計において必要不可欠である。我々は統合コードTOPICSの高速イオン解析部分を過渡解析により適したモデルに拡張した。高速イオンとバルクプラズマおよび平衡磁場が互いに整合性を持つ時間発展を実現するために、高速イオンのフォッカープランクソルバをTOPICSのバルク輸送ソルバと同レベルで統合化した。拡張した統合コードによるJT-60SAおよびITERのプラズマ立ち上げシミュレーションにより、過渡解析の可能性および有効性を確認した。その統合シミュレーションにおいて、高速イオン、プラズマ分布、平衡磁場の統合的発展を示した。

論文

Effects of toroidal rotation shear and magnetic shear on thermal and particle transport in plasmas with electron cyclotron heating on JT-60U

吉田 麻衣子; 本多 充; 成田 絵美*; 林 伸彦; 浦野 創; 仲田 資季; 宮戸 直亮; 竹永 秀信; 井手 俊介; 鎌田 裕

Nuclear Fusion, 55(7), p.073014_1 - 073014_9, 2015/07

 被引用回数:14 パーセンタイル:58(Physics, Fluids & Plasmas)

多くのトカマク装置では電子サイクロトロン加熱(ECH)時に熱や粒子の輸送が増大することが観測されており、ITERではECHを伴う運転シナリオの開発にとって重要な課題となっている。この課題を解決するために、JT-60Uの正磁気シアHモード放電、内部輸送障壁を伴う弱磁気シア放電と負磁気シア放電において、ECH印加時に熱及び粒子輸送が増加しない条件を調査した。その結果、トロイダル回転シアが負の大きい値をとる条件では、電子サイクロトロン加熱時のイオン熱輸送の上昇が抑えられることが分かった。この条件は、イオン温度対電子温度の比や、電子加熱パワーに寄らないことを明らかにした。磁気シアが負の値をとる条件では、その値の大きさに寄らず、電子熱輸送と粒子輸送が増加しないことが分かった。これらの結果は、ITERでのECH加熱シナリオの開発や電子加熱が主体となるITER及び原型炉でのプラズマ輸送特性の予知に重要な知見を与える。

論文

Integrated modelling of toroidal rotation with the 3D non-local drift-kinetic code and boundary models for JT-60U analyses and predictive simulations

本多 充; 佐竹 真介*; 鈴木 康浩*; 吉田 麻衣子; 林 伸彦; 神谷 健作; 松山 顕之; 篠原 孝司; 松永 剛; 仲田 資季; et al.

Nuclear Fusion, 55(7), p.073033_1 - 073033_11, 2015/07

 被引用回数:6 パーセンタイル:28.65(Physics, Fluids & Plasmas)

The integrated simulation framework for toroidal momentum transport is developed, which self-consistently calculates the neoclassical toroidal viscosity (NTV), the radial electric field $$E_r$$ and the resultant toroidal rotation $$V_phi$$ together with the scrape-off-layer(SOL)-physics based boundary model. The coupling of three codes, the 1.5D transport code, TOPICS, the 3D equilibrium code, VMEC and the 3D $$delta f$$ drift-kinetic equation solver, FORTEC-3D, makes it possible to calculate the NTV due to the non-axisymmetric perturbed magnetic field caused by toroidal field coils. Analyses reveal that the NTV significantly influences $$V_phi$$ in JT-60U and $$E_r$$ holds the key to determine the NTV profile. The sensitivity of the $$V_phi$$ profile to the boundary rotation necessitates a boundary condition modelling for toroidal momentum. Owing to the high-resolution measurement system in JT-60U, the $$E_r$$ gradient is found to be virtually zero at the separatrix regardless of toroidal rotation velocities. Focusing on $$E_r$$, the boundary model of toroidal momentum is developed in conjunction with the SOL/divertor plasma code D5PM. This modelling realizes self-consistent predictive simulations for operation scenario development in ITER.

論文

Assessment of the accuracy of plasma shape reconstruction by the Cauchy condition surface method in JT-60SA

宮田 良明; 鈴木 隆博; 武智 学; 浦野 創; 井手 俊介

Review of Scientific Instruments, 86(7), p.073511_1 - 073511_13, 2015/07

 被引用回数:5 パーセンタイル:24.25(Instruments & Instrumentation)

トカマク装置における安定したプラズマ平衡制御のためには正確にプラズマ境界を決定する必要がある。コーシー条件面(CCS)法はプラズマ外部に置かれた磁気計測器から、コーシー条件を持つ仮想面外部の磁束分布を計算し、プラズマ境界を再構築する数学的手法である。JT-60SAにおいて、プラズマ形状再構築誤差が最小となる最適なCCSの形状や未知数の数は、プラズマの大きさに比例することが分かり、この条件を用いることでプラズマ形状再構築精度が大幅に改善した。JT-60SAにおけるCCS法を用いたプラズマ形状再構築精度の評価を報告する。

論文

Advance in integrated modelling towards prediction and control of JT-60SA plasmas

林 伸彦; 本多 充; 白石 淳也; 宮田 良明; 若月 琢馬; 星野 一生; 藤間 光徳; 鈴木 隆博; 浦野 創; 清水 勝宏; et al.

Europhysics Conference Abstracts (Internet), 39E, p.P5.145_1 - P5.145_4, 2015/06

Towards prediction and control of JT-60SA plasmas, we are developing codes/models which can describe physics/engineering factors, and integrating them to one code TOPICS. Physics modelling: Coupling with MINERVA/RWMaC code showed that MHD equilibrium variation by centrifugal force largely affects RWM stability and the toroidal rotation shear stabilizes RWM. Coupling with OFMC code for NB torques, 3D MHD equilibrium code VMEC and drift-kinetic code FORTEC-3D for NTV torque, and toroidal momentum boundary model, predicted the core rotation of $$sim$$2% of Alfv$'e$n speed for a ITER hydrogen L-mode plasma. Coupling with core impurity transport code IMPACT showed the accumulation of Ar seeded to reduce the divertor heat load is so mild that plasma performance can be recovered by additional heating in JT-60SA steady-state (SS) scenario. Simulations coupled with MARG2D code showed that plasma current can be ramped-up to reach $$beta_N ge$$3 with MHD modes stabilized by ideal wall and with no additional flux consumption of central solenoid in JT-60SA. Engineering modelling: Coupling with integrated real-time controller showed that simultaneous control of $$beta_N$$ and $$V_{loop}$$ is possible at $$beta_N ge$$4 in JT-60SA SS scenarios. MHD equilibrium control simulator MECS demonstrated equilibrium control during heating phase and collapse induced events within power supply capability of PF coils in JT-60SA.

論文

Current ramp-up scenario with reduced central solenoid magnetic flux consumption in JT-60SA

若月 琢馬; 鈴木 隆博; 林 伸彦; 白石 淳也; 井手 俊介; 高瀬 雄一*

Europhysics Conference Abstracts (Internet), 39E, p.P5.144_1 - P5.144_4, 2015/06

We have investigated reduction of the CS flux required in the plasma current ramp-up phase using non-inductive current drive in JT-60SA with an integrated modeling code suite (TOPICS). JT-60SA will be equipped with various types of neutral beams different in the beam trajectories and energies (85 keV and 500 keV). We have made a scenario in which the plasma current is ramped up from 0.6 MA to 2.1 MA in 150 s with no additional CS flux consumption by overdriving the plasma current ($$I_{rm NI} > I_{rm p}$$, $$I_{rm NI}$$ : non-inductively driven current and $$I_{rm p}$$ : plasma current) with neutral-beam-driven and bootstrap current. In order to achieve the current overdrive condition from 0.6 MA, the current drive by the lower energy neutral beam injection (85 keV) is effective. The higher energy neutral beam injection (500 keV) cannot be utilized in this early phase with a low plasma density due to a large shine through loss, while it can effectively be utilized in the later phase. We have also investigated ideal MHD instabilities using a linear ideal MHD stability analysis code (MARG2D). External kink modes can be stabilized in most of the time during the current ramp-up if there is a perfect conducting wall.

論文

Simulation of plasma current ramp-up with reduced magnetic flux consumption in JT-60SA

若月 琢馬; 鈴木 隆博; 林 伸彦; 白石 淳也; 井手 俊介; 高瀬 雄一*

Plasma Physics and Controlled Fusion, 57(6), p.065005_1 - 065005_12, 2015/06

 被引用回数:9 パーセンタイル:41.4(Physics, Fluids & Plasmas)

Current ramp-up with reduced central solenoid (CS) flux consumption in JT-60SA has been investigated using an integrated modeling code suite (TOPICS) with a turbulent model (CDBM). The plasma current can be ramped-up from 0.6 MA to 2.1 MA with no additional CS flux consumption if the plasma current is overdriven by neutral-beam-driven and bootstrap current. The time duration required for the current ramp-up without CS flux consumption becomes as long as 150s. In order to achieve the current overdrive condition from 0.6 MA, the current drive by a lower energy neutral beam (85 keV) is effective. A higher energy neutral beam (500 keV) cannot be utilized in this early phase due to large shine through loss, while it can be effectively utilized in the later phase. Therefore, the main current driver should be switched from the lower energy neutral beam to the higher energy neutral beam during the current ramp-up phase. As a result of an intensive auxiliary heating needed to overdrive the plasma current, plasma beta becomes high. Ideal MHD stabilities of such high beta plasmas have been investigated using a linear ideal MHD stability analysis code (MARG2D). External kink modes can be stabilized in most of the time during the current ramp-up if there is a perfectly conducting wall at the location of the stabilizing plate and the vacuum vessel of JT-60SA and the plasma has a broader pressure profile.

論文

One-dimensional analysis of ECRH-assisted plasma start-up in JT-60SA

羽田 和慶*; 長崎 百伸*; 増田 開*; 小林 進二*; 井手 俊介; 諫山 明彦; 梶原 健

Fusion Science and Technology, 67(4), p.693 - 704, 2015/05

 被引用回数:10 パーセンタイル:64.82(Nuclear Science & Technology)

一般に、超伝導トカマクは常伝導トカマクに比べ印加可能なループ電圧が低いため、第一壁の状況によってはプラズマ着火が困難になる可能性がある。超伝導トカマクJT-60SAにおいても同様の状況であることから、プラズマ着火が行える条件を明らかにする必要がある。以前、著者らは、電子サイクロトロン共鳴加熱(ECRH)によるプラズマ着火に関する0次元モデルによる解析を行った。今回、ECRHパワーの吸収効率や、小半径方向の分布を考慮に入れた1次元モデルを開発した。このモデルの解析では電子および水素原子密度、電子およびイオン温度、プラズマ電流の時間発展に関する拡散型の連立偏微分方程式を解いている。解析の結果、初期中性粒子密度が3.0$$times$$10$$^{18}$$m$$^{-3}$$、誤差磁場が1mT、炭素・酸素不純物密度が電子密度に対してそれぞれ0.1%のとき、着火に必要なECRHパワーはおよそ1MW程度であり、JT-60SAの運転初期に装備されるECRHパワーの範囲内であることがわかった。また、着火に必要なECRHパワーは初期中性水素密度の0.6乗、誤差磁場強度の1乗で増加するという結果が得られ、中性水素密度や誤差磁場を低減することが重要であることがわかった。

論文

Gyrokinetic analyses of core heat transport in JT-60U plasmas with different toroidal rotation direction

成田 絵美*; 本多 充; 林 伸彦; 浦野 創; 井手 俊介; 福田 武司*

Plasma and Fusion Research (Internet), 10, p.1403019_1 - 1403019_11, 2015/03

The internal transport barriers (ITBs) formed in the tokamak plasmas with the weak magnetic shear and the weak radial electric field shear are often observed and the pressure gradient at the ITB is not very steep. In such plasmas the electron temperature ITB is steeper for co toroidal rotation cases than that for counter rotation cases. Clarifying the relationship between the rotation direction and heat transport in the ITB region, dominant instabilities are examined by the flux-tube gyrokinetic code GS2 to show that the linear growth rates $$gamma$$ for the co and counter rotation cases are comparable in magnitude, but the counter case shows the more trapped electron mode like frequency. The ratio of the electron heat diffusivity to the ion's is higher for the counter-rotation case. The difference in the ratio between the two cases agrees with the experiment. Investigating the flow shear effect on $$gamma$$ reveals that its effect is not so large as to change the aforementioned tendency.

論文

ITPA(国際トカマク物理活動)会合報告,47

諫山 明彦; 浦野 創; 宮戸 直亮; 井手 俊介; 朝倉 伸幸; 篠原 孝司

プラズマ・核融合学会誌, 90(12), p.830 - 833, 2014/12

2014年の秋季に国際トカマク物理活動(ITPA)に関する6つの会合(「ペデスタル物理」、「輸送と閉じ込め物理」、「統合運転シナリオ」、「スクレイプオフ層およびダイバータ物理」、「高エネルギー粒子物理」、「MHD安定性」)が開催された。各会合の概要をまとめて報告する。

論文

Experimental analyses and predictive simulations of toroidal rotation driven by the neoclassical toroidal viscosity in rippled tokamaks

本多 充; 佐竹 真介*; 鈴木 康浩*; 松永 剛; 篠原 孝司; 吉田 麻衣子; 松山 顕之; 井手 俊介; 浦野 創

Nuclear Fusion, 54(11), p.114005_1 - 114005_14, 2014/11

 被引用回数:15 パーセンタイル:59.37(Physics, Fluids & Plasmas)

A cooperation framework for analyses and predictions of the neoclassical toroidal viscosity (NTV) and the resultant toroidal flow is developed among the TOPICS, VMEC and FORTEC-3D codes. With the real geometry in JT-60U taken into account, it is found that the NTV is one of the cardinal torque sources especially in the edge region irrespective of the insertion of the ferritic steel tiles (FSTs) that reduce the toroidal field ripple amplitude and it is essential to numerically reproduce the measured toroidal rotation profile in the edge. The up-down asymmetric component of the NTV is damped due to the FSTs and the NTV profile correlates with the profile of the radial electric field $$E_r$$. Predictive simulations for JT-60SA H-mode scenarios are also performed to investigate the effects of the NTV on toroidal rotation. The NTV reversal is observed in the pedestal region where the steep pressure gradient is formed, due to the dependence of the NTV on $$E_r$$.

論文

Integrated modeling of toroidal rotation with the 3D non-local drift-kinetic code and boundary models for JT-60U analyses and predictive simulations

本多 充; 佐竹 真介*; 鈴木 康浩*; 吉田 麻衣子; 林 伸彦; 神谷 健作; 松山 顕之; 篠原 孝司; 松永 剛; 仲田 資季; et al.

Proceedings of 25th IAEA Fusion Energy Conference (FEC 2014) (CD-ROM), 8 Pages, 2014/10

The integrated framework for toroidal momentum transport is developed, which self-consistently calculates the neoclassical toroidal viscosity (NTV), the radial electric field $$E_r$$ and resultant toroidal rotation together with the scrape-off-layer (SOL) physics-based boundary model. The coupling of three codes, TOPICS, VMEC and FORTEC-3D, can calculate rotation caused by the NTV due to the non-axisymmetric perturbed magnetic field caused by toroidal field coils. It is found that the NTV influences toroidal rotation in JT-60U and $$E_r$$ holds the key to determine the NTV profile. The sensitivity of the toroidal rotation profile to the boundary rotation necessitates the boundary condition modeling. From the measurement in JT-60U, the $$E_r$$ gradient is found to be insensitive at the separatrix. Focusing on $$E_r$$, the boundary model of toroidal momentum is developed in conjunction with the SOL/divertor plasma code. This modeling realizes self-consistent predictive simulations for operation scenario development in ITER.

論文

Extension of kinetic-magnetohydrodynamic model to include toroidal rotation shear effect and its application to stability analysis of resistive wall modes

白石 淳也; 宮戸 直亮; 松永 剛; 本多 充; 林 伸彦; 井手 俊介

Proceedings of 25th IAEA Fusion Energy Conference (FEC 2014) (CD-ROM), 8 Pages, 2014/10

トカマクプラズマにおいて発生する電磁流体力学(MHD: Magnetohydrodynamics)モードに対する、トロイダル回転シア効果及び運動論的効果を解明するため、運動論的MHDモデルの拡張を行った。回転の効果を含む案内中心ラグランジアンを用いて、運動論的MHDモデルの再定式化を行った。その結果、案内中心の運動がコリオリ力と遠心力の効果を受けて、MHDモードと粒子運動の共鳴によるエネルギー項が拡張されることを示した。また、平衡の分布関数に回転の効果を入れることでも拡張を行った。これらの効果は、従来の運動論的MHDモデルでは見落とされてきた。この拡張された運動論的MHDモデルをトカマク配位における抵抗性壁モード(RWM: Resistive Wall Mode)解析コードMINERVA/RWMaCに実装し、ベンチマークに成功した。また、当コードをJT-60Uを模擬した平衡に応用し、回転シア効果によって、RWMが粒子運動と共鳴してエネルギーが減衰することが明らかになった。

論文

Physics comparison and modelling of the JET and JT-60U core and edge; Towards JT-60SA predictions

Garcia, J.*; 林 伸彦; Baiocchi, B.*; Giruzzi, G.*; 本多 充; 井手 俊介; Maget, P.*; 成田 絵美*; Schneider, M.*; 浦野 創; et al.

Nuclear Fusion, 54(9), p.093010_1 - 093010_13, 2014/09

 被引用回数:36 パーセンタイル:86.91(Physics, Fluids & Plasmas)

Extensive physics analysis and modelling has been undertaken for the typical operational regimes of the tokamak devices JET and JT-60U with the aim of extrapolating present day experiments to JT-60SA, which shares important characteristics with both tokamaks. A series of representative discharges of two operational scenarios, H-mode and hybrid, have been used for this purpose. Predictive simulations of core turbulence, particle transport, current diffusion and pedestal pressure have been carried out with different combinations of models. The ability of the models for reproducing the experimental data is analysed and scenario calculations for JT-60SA are performed following an optimum set of models.

論文

Development of the backflow model for simplified impurity exhaust in Monte-Carlo calculation

星野 一生; 清水 勝宏; 川島 寿人; 滝塚 知典*; 仲野 友英; 井手 俊介

Contributions to Plasma Physics, 54(4-6), p.404 - 408, 2014/06

 被引用回数:16 パーセンタイル:61.44(Physics, Fluids & Plasmas)

ダイバータプラズマシミュレーションにおいて不純物ガス輸送をモンテカルロ法で扱う場合、サブダイバータ領域における時定数が長いため、シミュレーションの収束に必要な計算時間が増加することが問題となる。そこで、サブダイバータからダイバータへの逆流量を事前に求めガスパフソースとして扱うことで、サブダイバータ領域における計算を省略することのできる逆流モデルを開発し、計算時間を大幅に短縮させた。開発したモデルを実装したダイバータコードSONICを用いて、JT-60SAの完全非誘導電流駆動シナリオの成立性について調べた。Arガスパフを行うことで、電子サイクロトロン電流駆動に必要な低密度(スクレイプオフ層の赤道面で1.2$$times$$10$$^{19}$$m$$^{-3}$$)と低ダイバータ熱負荷(10MW/m$$^2$$)が両立でき、完全非誘導電流駆動シナリオが成立することを示した。

論文

Analysis of JT-60SA scenarios on the basis of JET and JT-60U discharges

Garcia, J.*; 林 伸彦; Giruzzi, G.*; Schneider, M.*; Joffrin, E.*; 井手 俊介; 坂本 宜照; 鈴木 隆博; 浦野 創; JT-60チーム; et al.

Europhysics Conference Abstracts (Internet), 38F, p.P1.029_1 - P1.029_4, 2014/06

Creation of JT-60SA scenarios is necessary in order to make deeper analyses: Fast ions, heating schemes, MHD. Validation exercise: a series of representative discharges of the three main operational scenarios, H-mode, hybrid and steady-state have been selected for each device in order to extrapolate to JT-60SA. An extensive analysis of the main physics similarities and differences among the discharges has been carried out in order to explain results. Using integrated modelling codes CRONOS and TOPICS, benchmark of the codes is done. Predictive core turbulence simulations have been carried out with three transport models: Bohm-GyroBohm, CDBM and GLF23. Particle transport is analyzed with GLF23. Pressure pedestal predictions are simulated with Cordey MHD scaling. Fully predictive simulations of temperatures, density and pedestal have been performed with GLF23 and CDBM models for the temperatures and GLF23 for the density. Calculations for JT-60SA are performed following the best combination of models found.

論文

Study of plasma equilibrium control for JT-60SA using MECS

宮田 良明; 鈴木 隆博; 井手 俊介; 浦野 創

Plasma and Fusion Research (Internet), 9(Sp.2), p.3403045_1 - 3403045_5, 2014/05

精密なプラズマ位置制御は、安全かつ安定したプラズマ運転において重要な課題である。JT-60SAにおけるプラズマ平衡制御手法の研究のため、MHD平衡制御シミュレータ(MECS)の開発を進めている。今回、実機のプラズマ平衡制御を模擬するため、プラズマ断面形状再構成,コイル電源,ポロイダル磁場コイル,高速プラズマ位置制御コイルのモジュールをMECSに導入した。MECSを用いてコイル電源制限内でのプラズマ平衡制御の制御性を報告する。

336 件中 1件目~20件目を表示