検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 128 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Sodium-cooled Fast Reactors

大島 宏之; 森下 正樹*; 相澤 康介; 安藤 勝訓; 芦田 貴志; 近澤 佳隆; 堂田 哲広; 江沼 康弘; 江連 俊樹; 深野 義隆; et al.

Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07

ナトリウム冷却高速炉(SFR: Sodium-cooled Fast Reactor)の歴史や、利点、課題を踏まえた安全性、設計、運用、メンテナンスなどについて解説する。AIを利用した設計手法など、SFRの実用化に向けた設計や研究開発についても述べる。

論文

Structural phase transition in cobalt oxyfluoride Co$$_{3}$$Sb$$_{4}$$O$$_{6}$$F$$_{6}$$ observed by high-resolution synchrotron and neutron diffraction

下野 聖矢*; 石橋 広記*; 永吉 祐輔*; 池野 豪一*; 河口 彰吾*; 萩原 雅人; 鳥居 周輝*; 神山 崇*; 市橋 克哉*; 西原 禎文*; et al.

Journal of Physics and Chemistry of Solids, 163, p.110568_1 - 110568_7, 2022/04

 被引用回数:0 パーセンタイル:17.17(Chemistry, Multidisciplinary)

The structural phase transition from cubic ($$Ibar{4}3m$$) to a $$c > a$$ tetragonal ($$Ibar{4}$$) at $$T_{rm S}$$ $$sim$$ 180 K was found in non-centrosymmetric oxyfluoride Co$$_{3}$$Sb$$_{4}$$O$$_{6}$$F$$_{6}$$ by high-resolution neutron and synchrotron powder diffraction. To investigate this phase transition, specific heat, magnetization, and dielectric measurements were performed. Although the specific heat and dielectric constant showed anomalies at $$T_{rm S}$$, a phase transition to ferroelectricity was not observed in the polarization hysteresis loop down to 30 K. The rotation of the CoO$$_{2}$$F$$_{4}$$ octahedron was observed at $$T_{rm S}$$ from the structural analysis using synchrotron and neutron powder diffraction data. It was found that the magnetic phase transition from paramagnetic to G-type antiferromagnetic occurred at $$T_{rm N}$$ $$sim$$ 67 K, at which a peak was observed in the specific heat measurements, via magnetic structure analysis using neutron powder diffraction data. The magnetic moments of Co$$^{2+}$$ were aligned along the tetragonal $$c$$-axis direction with a Co$$^{2+}$$ moment of 2.80(1) $$mu_{rm B}$$ at 13 K.

論文

PSTEP: Project for solar-terrestrial environment prediction

草野 完也*; 一本 潔*; 石井 守*; 三好 由純*; 余田 成男*; 秋吉 英治*; 浅井 歩*; 海老原 祐輔*; 藤原 均*; 後藤 忠徳*; et al.

Earth, Planets and Space (Internet), 73(1), p.159_1 - 159_29, 2021/12

 被引用回数:6 パーセンタイル:52.8(Geosciences, Multidisciplinary)

PSTEPとは、2015年4月から2020年3月まで日本国内の太陽・地球惑星圏に携わる研究者が協力して実施した科研費新学術領域研究である。この研究枠組みから500以上の査読付き論文が発表され、様々なセミナーやサマースクールが実施された。本論文では、その成果をまとめて報告する。

論文

Optimum temperature for HIP bonding invar alloy and stainless steel

涌井 隆; 石井 秀亮*; 直江 崇; 粉川 広行; 羽賀 勝洋; 若井 栄一; 高田 弘; 二川 正敏

Materials Transactions, 60(6), p.1026 - 1033, 2019/06

 被引用回数:3 パーセンタイル:18.28(Materials Science, Multidisciplinary)

J-PARCの核破砕中性子源で使用する水銀ターゲット容器は、1.3$$times$$1.3$$times$$2.5m$$^{3}$$と大きいため、使用済み容器の廃棄量を低減する観点で、損傷量の大きい前半部を分割できる構造を検討している。分割部のフランジには、高いシール性能(1$$times$$10$$^{-6}$$Pa・m$$^{3}$$/s以下)が必要である。このフランジの材料として、ビーム運転時の熱変形を低減するために低熱膨張材であるインバー合金は有望であるが、弾性係数が低いためボルト締結時の変形が大きくなる。実用上はステンレス鋼で補強するが、HIP接合により広い面積を全面にわたって確実に接合する条件を見出すことが課題であった。そこで、接合温度が異なる試験片(973, 1173, 1373及び1473K)について、引張試験及び数値解析による残留応力評価を行った。973Kで接合した試験片は、拡散層厚さが殆どなく接合界面で破断した。引張強度は、接合温度の上昇とともに減少し、1473Kの場合、約10%低下した。接合面近傍の残留応力は最大50%増加した。これらの結果から、1173Kが最適な接合温度であることを結論付けた。

論文

Fine dispersion of Pt$$_{4-5}$$ subnanoclusters and Pt single atoms over porous carbon supports and their structural analyses with X-ray absorption spectroscopy

糸井 弘行*; 西原 洋知*; 小林 俊介*; Ittisanronnachai, S.*; 石井 孝文*; Berenguer, R.*; 伊藤 仁*; 松村 大樹; 京谷 隆*

Journal of Physical Chemistry C, 121(14), p.7892 - 7902, 2017/04

 被引用回数:30 パーセンタイル:72.07(Chemistry, Physical)

We demonstrate the fine dispersion of Pt$$_{4-5}$$ subnanoclusters or Pt single atoms on two types of porous carbon supports, Ketjen black (KB) and zeolite-templated carbon (ZTC). For the fine dispersion of Pt subnanoclusters, simply filling an organoplatinum complex, (COD)PtMe$$_{2}$$, as a Pt precursor into the micropores is found to be crucial to prevent agglomeration or sintering of Pt subnanoclusters. Moreover, it is possible to disperse Pt single atoms on ZTC, simply by decreasing the Pt loading amount down to ca. 0.9 wt%, owing to some stabilization effect by oxygen-containing functional groups. Extended X-ray absorption fine structure (EXAFS) analysis for Pt subnanoclusters reveals that the Pt-Pt bond is contracting to a large extent ($$sim$$2.8%) relative to balk values, and upon hydrogen chemisorption, the bond elongates more than the reported values for the 1.0 nm sized Pt nanoparticles.

論文

岩石利用セグメント支保工の力学特性と坑道の安定性に関する検討

多田 浩幸*; 熊坂 博夫*; 齋藤 亮*; 中谷 篤史*; 石井 卓*; 藤田 朝雄; 杉田 裕; 中間 茂雄; 真田 昌慶*

土木学会論文集,F2(地下空間研究)(インターネット), 73(1), p.11 - 28, 2017/03

本論文では、低アルカリ性モルタルを用いた岩石利用セグメント支保工の力学特性、支保工としての成立性について室内試験や要素試験を行い検討した。検討結果より、従来の吹付けコンクリートを主体とした支保工に対して、低アルカリ性モルタルを用いた岩石利用セグメント支保工は、セメント使用量を大幅に低減し、かつ低アルカリ性モルタルを利用することにより、セメント影響のさらなる低減化が期待できること、地層処分施設の支保工として地山の安定性を確保することが可能であることを示した。

報告書

第2期中期計画期間における研究成果取りまとめ報告書; 深地層の研究施設計画および地質環境の長期安定性に関する研究

濱 克宏; 水野 崇; 笹尾 英嗣; 岩月 輝希; 三枝 博光; 佐藤 稔紀; 藤田 朝雄; 笹本 広; 松岡 稔幸; 横田 秀晴; et al.

JAEA-Research 2015-007, 269 Pages, 2015/08

JAEA-Research-2015-007.pdf:68.65MB
JAEA-Research-2015-007(errata).pdf:0.07MB

日本原子力研究開発機構の第2期中期計画期間(平成22$$sim$$26年度)における、超深地層研究所計画および幌延深地層研究計画、地質環境の長期安定性に関する研究の成果を取りまとめた。研究成果については、地層処分事業におけるサイト選定から処分開始に関する意思決定ポイントまでに必要な技術情報を、事業者・規制機関が活用可能な形式で体系化し、所期の目標としていた精密調査(前半)の段階に必要となる技術基盤として整備した。

報告書

瑞浪超深地層研究所計画におけるクラックテンソル理論に基づく等価連続体モデル化手法の検討

真田 祐幸; 佐藤 稔紀; 丹野 剛男*; 引間 亮一*; 多田 浩幸*; 熊坂 博夫*; 石井 卓*; 櫻井 英行*

JAEA-Research 2014-006, 124 Pages, 2014/06

JAEA-Research-2014-006.pdf:11.26MB

日本原子力研究開発機構では、結晶質岩を対象とした深部地質環境の調査・解析・評価技術の基盤の整備と、深地層における工学技術の基盤の整備を目標として、岐阜県瑞浪市において超深地層研究所計画を進めている。超深地層研究所計画における岩盤力学分野では、地上からの調査段階において、研究坑道の掘削に伴い周辺岩盤中に生じる掘削影響の評価方法の構築を課題の一つとして設定している。本報告では、深度500mまでの立坑および水平坑道の研究坑道の壁面観察や力学試験データ等を使用してクラックテンソルの算定を行った。そして、深度500mにおけるクラックテンソルを用いて、換気立坑の深度500mおよび深度500m予備ステージの2次元掘削解析を行った。また、第1段階の調査(MIZ-1号孔)結果に基づいて算出した深度500mのクラックテンソルの検証を本報で算定したクラックテンソルを基に行った。さらに、換気立坑の深度170から500mおよび深度500m予備ステージを対象に、基準領域および観察領域を設定し、クラックテンソルの相対誤差を算出するとともに、観察領域の大きさに伴う相対誤差の変動の様子を調べた。

論文

Bipartite magnetic parent phases in the iron oxypnictide superconductor

平石 雅俊*; 飯村 壮史*; 小嶋 健児*; 山浦 淳一*; 平賀 晴弘*; 池田 一貴*; Miao, P.*; 石川 喜久*; 鳥居 周輝*; 宮崎 正範*; et al.

Nature Physics, 10(4), p.300 - 303, 2014/04

 被引用回数:101 パーセンタイル:95.53(Physics, Multidisciplinary)

High-temperature (high-$$T_{rm c}$$) superconductivity appears as a consequence of the carrier-doping of an undoped parent compound exhibiting antiferromagnetic order; thereby, ground-state properties of the parent compound are closely relevant to the superconducting state. On the basis of the concept, a spin-fluctuation has been addressed as an origin of pairing of the superconducting electrons in cuprates. Whereas, there is growing interest in the pairing mechanism such as an unconventional spin-fluctuation or an advanced orbital-fluctuation due to the characteristic multi-orbital system in iron-pnictides. Here, we report the discovery of an antiferromagnetic order as well as a unique structural transition in electron-overdoped LaFeAsO$$_{1-x}$$H$$_x$$ ($$x sim 0.5$$), whereby another parent phase was uncovered, albeit heavily doped. The unprecedented two-dome superconducting phases observed in this material can be interpreted as a consequence of the carrier-doping starting from the original at $$x sim 0$$ and advanced at $$x sim 0.5$$ parent phases toward the intermediate region. The bipartite parent phases with distinct physical properties in the second magnetic phase provide us with an interesting example to illustrate the intimate interplay among the magnetic interaction, structural change and orbital degree of freedom in iron-pnictides.

論文

Quantitative analysis of the initial transport of fixed nitrogen in nodulated soybean plants using $$^{15}$$N as a tracer

Hung, N. V. P.*; 渡部 詩織*; 石川 伸二*; 大竹 憲邦*; 末吉 邦*; 佐藤 孝*; 石井 里美; 藤巻 秀; 大山 卓爾*

Soil Science and Plant Nutrition, 59(6), p.888 - 895, 2013/12

 被引用回数:4 パーセンタイル:14.11(Plant Sciences)

The quantitative analysis of the initial transport of fixed $$^{15}$$N in intact nodulated soybean plants was investigated at the vegetative stage and pod-filling stage by the $$^{15}$$N pulse-chase experiment. The nodulated roots were exposed to N$$_{2}$$ gas labeled with a stable isotope $$^{15}$$N for 1 hour. Plant roots and shoots were separated into three sections with the same length of the main stem or primary root. Approximately 80% and 92% of fixed N was distributed in the basal part of the nodulated roots at vegetative and pod-filling stage the end of 1 hour of $$^{15}$$N$$_{2}$$ exposure, respectively. In addition, about 90% of fixed $$^{15}$$N was retained in the nodules and 10% was exported to root and shoot after 1 hour of $$^{15}$$N$$_{2}$$ exposure at pod-filling stage. The percentage distribution of $$^{15}$$N in the nodules at pod-filling stage decreased from 90% to 7% during the 7 hours of the chase-period, and increased in the roots (14%), stems (54%) leaves (12%), pods (10%), and seeds (4%). The $$^{15}$$N distribution was negligible in the distal root segment, suggesting that nitrogen fixation activity was negligible and recycling fixed N from the shoot to the roots was very low in the initially short time of the experiment.

論文

セメントの使用を極力抑えた岩石利用セグメント支保工の開発

多田 浩幸*; 熊坂 博夫*; 齋藤 亮*; 中谷 篤史*; 石井 卓*; 真田 昌慶; 野口 聡*; 岸 裕和*; 中間 茂雄; 藤田 朝雄

第13回岩の力学国内シンポジウム講演論文集(CD-ROM), p.133 - 138, 2013/01

高レベル放射性廃棄物の地層処分施設に関し、セメント系材料の使用を極力抑えた坑道の新しい構築方法の開発に取り組み、低アルカリ性モルタルを用いた岩石利用セグメント支保工の成立性や有効性を示すための研究開発を進めている。本研究では、低アルカリ性モルタルを用いた岩石利用セグメント支保工と裏込め材の力学特性値を室内試験により取得し、得られた物性値を用いて坑道の安定性に関する検討を実施した。検討結果より、従来の吹付けコンクリートを主体とした支保工に対して、セメント使用量を大幅に低減し、かつ低アルカリ性モルタル利用することにより、セメント影響のさらなる低減化を図った支保工の力学的な成立性,有効性を確認した。

論文

Electroplating of Ni microstructures on the cross section of Cu wire using PMMA mother fabricated by proton beam writing

田邊 祐介*; 岩本 隆志*; 高橋 潤一*; 西川 宏之*; 佐藤 隆博; 石井 保行; 神谷 富裕

JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 129, 2013/01

In this study, the Ni microstructures were attempted to be fabricated on a distal surface of Cu wires with a diameter of 1.0 mm aiming at the use for imprint lithography. Firstly a PMMA master block was fabricated on the distal surface by exposing PB with beam size of 1.1 $$mu$$m at 3.0 MeV and developing it by IPA-water for electroplating. The master block was composed of the 4-$$mu$$m wide lines with pitches of 25 $$mu$$m and depths of 20 $$mu$$m. Secondly the electroplating was performed on the PMMA master block using a nickel sulfamate bath. Thirdly the electroplated Ni surface was mechanically polished easily to remove PMMA by smoothing its surface. Finally, the Ni microstructures with 20.5 $$mu$$m were fabricated by removing the PMMA after polishing. We additionally performed UV imprint lithography of the photosensitive polymer using the Ni microstructures as a mold. The observation result of SEM images of Ni microstructures and UV imprinted grooves showed that their imprinted grooves were successfully transferred by way of the Ni microstructures from the PMMA master block using the combination of the electroplating and imprinting.

論文

Tilted-foil technique for producing a spin-polarized radioactive isotope beam

平山 賀一*; 三原 基嗣*; 渡辺 裕*; Jeong, S. C.*; 宮武 宇也*; 百田 佐多夫*; 橋本 尚志*; 今井 伸明*; 松多 健策*; 石山 博恒*; et al.

European Physical Journal A, 48(5), p.54_1 - 54_10, 2012/05

 被引用回数:2 パーセンタイル:16.84(Physics, Nuclear)

The tilted-foil method for producing spin-polarized radioactive isotope beams has been studied for the application to nuclear physics and materials science, using the radioactive nucleus $$^8$$Li produced at the Tokai Radioactive Ion Accelerator Complex (TRIAC). We successfully produced polarization in a $$^8$$Li beam using 15 thin polystyrene foils fabricated especially for this purpose. A systematic study of the nuclear polarization as a function of the number of foils, beam energy, tilt angles and foil material has been performed, confirming the features of the tilted-foil technique experimentally. The contributions made to the nuclear polarization of $$^8$$Li nuclei by the atomic states was investigated.

論文

Spin-orbital short-range order on a honeycomb-based lattice

中辻 知*; 久我 健太郎*; 木村 健太*; 佐竹 隆太*; 片山 尚幸*; 西堀 英治*; 澤 博*; 石井 梨恵子*; 萩原 政幸*; Bridges, F.*; et al.

Science, 336(6081), p.559 - 563, 2012/05

 被引用回数:113 パーセンタイル:95.28(Multidisciplinary Sciences)

フラストレートした磁性体においても最低温度まで乱れが残る場合がある。その一例がBa$$_3$$CuSb$$_2$$O$$_9$$であり、微視的に見ると磁気的に非対称である一方、長さ,時間スケールともに平均的に見ると対称な状態にある。われわれは、この物質において静的なヤーンテラー歪を示すことなくCu$$^{2+}$$イオンのハニカム格子が、フラストレートした状態にあることを見いだした。このハニカム格子においては、スピン1/2同士が2次元的にランダムに結合しており、スピンダイマー的なブロードな励起があり、また低エネルギーのスピン自由度が残ることが見られた。

報告書

結晶質岩を対象としたクラックテンソルによる等価連続体モデル化手法に関する研究

丹野 剛男; 佐藤 稔紀; 真田 祐幸; 引間 亮一; 松井 裕哉; 多田 浩幸*; 郷家 光男*; 熊坂 博夫*; 石井 卓*

JAEA-Research 2012-002, 86 Pages, 2012/03

JAEA-Research-2012-002.pdf:8.48MB

日本原子力研究開発機構では、超深地層研究所計画(以下、MIU計画)の岩盤力学研究の一環として、結晶質岩を対象とし、坑道の掘削に伴って周辺岩盤中に生じる掘削影響の評価を地上からの調査段階で実施する方法の構築を課題の一つとして設定している。この課題を達成するために、岐阜県瑞浪市の瑞浪超深地層研究所において、割れ目の力学特性やその幾何学的分布が岩盤の変形に支配的な影響を及ぼす結晶質岩について、クラックテンソルモデル(等価連続体モデルの一つ)による研究を進めている。あわせて、クラックテンソルによる相対誤差に基づいたREV(Representative Elementary Volume: 代表要素体積,寸法効果を定量的に表現する指標であり、不連続体を等価な連続体とみなして解析・解釈する際の最小体積の意味)の検討を実施し、第3段階における試験計画の策定や、モデル化の際の要素の大きさの設定にREVの検討結果を適用することを試みている。2010年度は、クラックテンソルモデルに基づき、REVの検討を実施した。また、クラックテンソルのトレースと電中研式岩盤等級との関係を調査し、設計時に設定した岩盤等級に基づく物性分布評価の妥当性を検討した。

論文

Development of beam generation and irradiation technology for electrostatic accelerators

横山 彰人; 宇野 定則; 千葉 敦也; 山田 圭介; 齋藤 勇一; 石井 保行; 佐藤 隆博; 大久保 猛; 上松 敬

JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 158, 2012/01

TIARA静電加速器において平成22年度に行ったビーム発生及び照射技術の開発結果を報告する。タンデム加速器では、クラスターイオンの荷電変換ガスとの衝突による解離により、加速後のビーム電流量が単原子イオンのそれと比べて小さくなる。これを改善するために、クラスターイオンの荷電変換と解離機構を研究してきた。平成22年度は2.5MeVの炭素クラスターイオンと、ネオンガスとの衝突における解離断面積を調べた。その結果、解離断面積は10$$^{-15}$$cm$$^{-2}$$台であること、及びクラスターイオンの構成原子数に比例して大きくなることがわかった。イオン注入装置では、低エネルギー重イオンビームの形状をモニターする発光体に充分な発光強度,照射耐性を有するものがなかったため、ビーム調整が難しかった。そこで2次元のビーム強度分布を測定するために、マルチファラデーカップ(MFC)を開発し、ビーム電流量を正確に測定できるように改良を重ねてきた。平成22年度は性能試験を行い、30keVのフラーレンビームの強度分布を7.7秒の測定時間で得ることができた。シングルエンド加速器では、ナノビーム形成に必要な高輝度イオン源を開発するために、加速後のビームエミッタンスを発光体を利用して測定するエミッタンスモニターを開発したが、ビーム照射による発光体の劣化や発光量の飽和など問題があった。今後はワイヤー走査によるビーム電流値測定でエミッタンスを求め、発光体による測定結果と比較し、信頼性を確認する。

論文

Operation of the electrostatic accelerators

上松 敬; 宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 齋藤 勇一; 石井 保行; 佐藤 隆博; 大久保 猛; 横田 渉; et al.

JAEA-Review 2011-043, JAEA Takasaki Annual Report 2010, P. 173, 2012/01

平成22年度にTIARA3台の静電加速器は順調に稼動し、計画されたイオン照射実験はユーザーの都合で中止及び東日本大震災(2011年3月11日)の影響による中止を除いてすべて実施した。10月以降に国際原子力人材育成イニシアチブ事業による土曜日運転を実施したため、年間運転時間は平年並みで、タンデム加速器,シングルエンド加速器,イオン注入装置についてそれぞれ2116, 2367, 1800時間であった。整備では、シングルエンド加速器タンク内の高電圧ターミナルの発電機の交換を行った。また、イオン注入装置では新規ビームラインの増設を決定し、これに必要なビーム振分け電磁石を設置した。新ビーム開発においては、タンデム加速器でInイオンについて500nA程度の生成が可能となった。

論文

Effect of nitrate on nodulation and nitrogen fixation of soybean

大山 卓爾; 藤掛 浩行*; 八島 裕幸*; 七夕 小百合*; 石川 伸二*; 佐藤 孝*; 西脇 俊和*; 大竹 憲邦*; 末吉 邦*; 石井 里美; et al.

Soybean Physiology and Biochemistry, p.333 - 364, 2011/11

Soybean Physiology and Biochemistryの中の、ダイズ植物の根粒形成及び窒素固定に対する硝酸の影響という章で研究成果をまとめている。窒素固定について、$$^{13}$$N標識窒素ガスを製造し、非侵襲的にイメージングし、定量することができた。硝酸処理下で$$^{11}$$C標識二酸化炭素を投与して光合成産物の根への分配をPETISにより観察し、さらに根粒の成長との関連を調べた。ひとつの植物の根を、硝酸処理区と無処理区に分けて$$^{11}$$C標識光合成産物の根への移行を観察したところ、硝酸処理区の根への移行が早いことがわかった。$$^{13}$$N標識硝酸を根粒着生株と非着生株の根に与え、硝酸処理区,無処理区で吸収,移行の様子を観察したところ$$^{13}$$N標識硝酸の吸収,移行に差はなかった。このことから、根粒の着生は硝酸の吸収,移行に影響を与えないことがわかった。根粒の窒素固定や硝酸の影響に関してPETISを用いたデータが大きく貢献している。

論文

原子力機構TIARA施設の現状

山田 圭介; 奈良 孝幸; 石堀 郁夫; 倉島 俊; 吉田 健一; 湯山 貴裕; 石坂 知久; 上松 敬; 宇野 定則; 千葉 敦也; et al.

Proceedings of 8th Annual Meeting of Particle Accelerator Society of Japan (インターネット), 3 Pages, 2011/08

原子力機構のイオン照射研究施設TIARAが有するAVFサイクロトロン(K110),3MVタンデム加速器,3MVシングルエンド加速器,400kVイオン注入装置の2010年度の運転状況,保守・整備及び技術開発の概要を報告する。年間運転時間はサイクロトロン3343時間,タンデム加速器2115時間,シングルエンド加速器2367時間,イオン注入装置1800時間であった。サイクロトロンについてはイオン種・エネルギー変更回数234回,加速モードの変更回数55回であった。東北地方太平洋沖地震後の運転を点検及び東京電力の計画停電の影響のために中止した。地震により、サイクロトロンでは遮蔽扉のロックピンが破損した他、入射系のターボ分子ポンプが故障した。全加速器について点検後の調整運転でビーム加速・輸送に問題がないことを確認した。技術開発では、多重極磁場による大面積均一照射技術の開発を進めるために専用の照射チャンバーをサイクロトロンのビームラインに設置した。また、2009年に設置したサイクロトロンのアクセプタンス測定装置の性能試験を開始するとともに、主磁場の迅速切替え技術の開発をほぼ完了した。イオン注入装置ではクラスターイオン専用のビームラインを増設するために偏向電磁石の入れ替えを行った。新ビーム開発では、サイクロトロンで190MeV $$^{14}$$N$$^{5+}$$, 490MeV $$^{129}$$Xe$$^{4+}$$を、タンデム加速器でIn$$^{3+}$$、イオン注入装置でGd$$^{+}$$及びC$$_{70}$$$$^{+}$$をそれぞれ加速した。

論文

TIARA静電加速器の現状

宇野 定則; 千葉 敦也; 山田 圭介; 横山 彰人; 上松 敬; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; et al.

第24回タンデム加速器及びその周辺技術の研究会報告集, p.125 - 128, 2011/07

高崎量子応用研究所イオン照射研究施設(TIARA)の3台の静電加速器の年間運転時間は、平成12年以降からタンデム加速器で約2000時間、イオン注入装置で約1900時間、シングルエンド加速器で約2500時間の水準を保っており、平成23年3月末までの総運転時間は、各32995時間,30675時間,39231時間である。2011年3月の東日本大震災では、3台の加速器に損傷はなかったが、その後の東京電力による計画停電により通常運転が不可能となったため、平成22年度のマシンタイムは約9日間を中止した。タンデム加速器では、インジウム(In)の加速試験を行い、500nAのビーム電流が安定に発生できることを確認した。また、イオン注入装置では、ガドリニウム(Gd)の生成試験を行い、最大400nAビーム電流が得られることを確認して実験利用を開始した。

128 件中 1件目~20件目を表示