検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 293 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

${it In situ}$ neutron diffraction revealing the achievement of excellent combination of strength and ductility in metastable austenitic steel by grain refinement

Mao, W.; Gong, W.; Harjo, S.; 諸岡 聡; Gao, S.*; 川崎 卓郎; 辻 伸泰*

Journal of Materials Science & Technology, 176, p.69 - 82, 2024/03

Fe-24Ni-0.3C(wt.%)準安定オーステナイト鋼の降伏応力は、平均結晶粒径が35$$mu$$m(粗粒[CG])から0.5$$mu$$m(超微細粒[UFG])に減少すると3.5倍(158$$rightarrow$$551MPa)に増加したが、引張伸びは大きく維持された(0.87$$rightarrow$$0.82)。結晶粒径が力学特性と変形機構に及ぼす影響を定量的に明らかにするため、室温での引張変形中にCGとUFG Fe-24Ni-0.3C鋼のその場中性子回折測定を行った。CGとUFG試料における塑性変形の初期段階は転位すべりによって支配され、変形後期には変形誘起マルテンサイト変態(DIMT)も生じた。結晶粒の微細化により、DIMTの開始応力が大きく増加し、ひずみに関するDIMTの速度が抑制されることがわかった。結果として、(i)結晶粒微細化によりオー ステナイトが安定化し、DIMTに対して最も安定な結晶粒である$$<$$111$$>$$//LD(LD:負荷方向)オーステナイト粒でのDIMTの開始が大幅に遅れた。その結果、UFG試験片の$$<$$111$$>$$//LDオーステナイト粒のほとんどはマルテンサイトに変態しなかった。(ii)結晶粒の微細化は、マルテンサイト変態の自己促進効果も抑制した。それにもかかわらず、UFG試験片の変態速度が低いDIMTは、CG試験片のより応力を増加させるのに効率がよく、変形中に均一な変形を維持するのに適していた。以上の現象は、UFG準安定オーステナイト鋼の優れた強度と延性の両立に相互に寄与している。

論文

Martensitic transformation behavior of Fe-Ni-C alloys monitored by ${it in-situ}$ neutron diffraction during cryogenic cooling

山下 享介*; Harjo, S.; 川崎 卓郎; 諸岡 聡; Gong, W.; 藤井 英俊*; 友田 陽*

ISIJ International, 64(2), p.192 - 201, 2024/01

${it In situ}$ neutron diffraction measurements were performed on Fe-33Ni-0.004C alloy (33Ni alloy) and Fe-27Ni-0.5C alloy (27Ni-0.5C alloy) during cooling from room temperature to the cryogenic temperature (4 K) to evaluate changes in the lattice constants of austenite and martensite, and changes in the tetragonality of martensite due to thermally induced martensitic transformation. As the martensitic transformation progressed, the lattice constants of austenite in both alloys deviated to smaller values than those predicted considering the thermal shrinkage, accompanied by an increase in the full width at half maximum of austenite. The fresh martensite formed in both alloys had a body-centered tetragonal (BCT) structure, regardless of the carbon content. The tetragonality of martensite decreased with progressive martensitic transformation during cooling in the 33Ni alloy, but was almost constant in the 27Ni-0.5C alloy. This suggests that carbon is necessary to maintain the tetragonality of martensite during cooling. The tetragonality of martensite in the 27Ni-0.5C alloy decreased during room temperature aging because of carbon mobility.

論文

Probing deformation behavior of a refractory high-entropy alloy using ${it in situ}$ neutron diffraction

Zhou, Y.*; Song, W.*; Zhang, F.*; Wu, Y.*; Lei, Z.*; Jiao, M.*; Zhang, X.*; Dong, J.*; Zhang, Y.*; Yang, M.*; et al.

Journal of Alloys and Compounds, 971, p.172635_1 - 172635_7, 2024/01

The grain orientation-dependent lattice strain evolution of a (TiZrHfNb)$$_{98}$$$$N_2$$ refractory high-entropy alloy (HEA) during tensile loading has been investigated using ${it in situ}$ neutron diffraction. The equivalent strain-hardening rate of each of the primary $$<hkl>$$-oriented grain families was found to be relatively low, manifesting the macroscopically weak work-hardening ability of such a body-centered cubic (BCC)-structured HEA. This finding is indicative of a dislocation planar slip mode that is confined in a few single-slip planes and leads to in-plane softening by high pile-up stresses.

論文

Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation; An in situ diffraction study

Liss, K.-D.*; Han, J.-K.*; Blankenburg, M.*; Lienert, U.*; Harjo, S.; 川崎 卓郎; 徐 平光; 行武 栄太郎*; Kawasaki, M.*

Journal of Materials Science, 23 Pages, 2024/00

The magnesium alloy AZ31, which has undergone high-pressure torsion processing, was subjected to in situ annealing micro-beam synchrotron high-energy X-ray diffraction and compared to the as-received rolled sheet material that was investigated through in situ neutron diffraction. While the latter only exhibits thermal expansion and minor recovery, the nanostructured specimen displays a complex evolution, including recovery, strong recrystallization, phase transformations, and various regimes of grain growth. Nanometer-scale grain sizes, determined using Williamson-Hall analysis, exhibit seamless growth, aligning with the transition to larger grains, as assessed through the occupancy of single grain reflections on the diffraction rings. The study uncovers strain anomalies resulting from thermal expansion, segregation of Al atoms, and the kinetics of vacancy creation and annihilation. Notably, a substantial number of excess vacancies were generated through high-pressure torsion, and maintained for driving the recrystallization and forming highly activated volumes for diffusion and phase precipitation during heating. The unsystematic scatter observed in the Williamson-Hall plot indicates high dislocation densities following severe plastic deformation, which significantly decreases during recrystallization. Subsequently, dislocations reappear during grain growth, likely in response to torque gradients in larger grains. It is worth noting that the characteristics of unsystematic scatter differ for dislocations created at high and low temperatures, underscoring the strong temperature dependence of slip system activation.

論文

Stress evaluation method by neutron diffraction for HCP-structured magnesium alloy

Harjo, S.; Gong, W.; 川崎 卓郎

Quantum Beam Science (Internet), 7(4), p.32_1 - 32_13, 2023/12

Tensile deformation in situ neutron diffraction of an extruded AZ31 alloy was performed to validate conventional procedures and to develop new procedures for stress evaluation from lattice strains by diffraction measurements of HCP-structured magnesium alloys. Increases in the lattice strains with respect to the applied true stress after yielding largely vary among [${it hk.l}$] grains. The newly proposed procedure of stress evaluation from the lattice strains shows very high accuracy and reliability by weighting the volume fraction of [${it hk.l}$] grains and evaluating them in many [${it hk.l}$] orientations in addition to multiplication by the diffraction elastic constant. When multiple ${it hk.l}$ peaks cannot be obtained simultaneously, we recommend to use the 12.1 peak for stress evaluation.

論文

Effects of dislocation arrangement and character on the work hardening of lath martensitic steels

段野下 宙志*; 長谷川 寛*; 樋口 翔*; 松田 広志*; Gong, W.; 川崎 卓郎; Harjo, S.; 梅澤 修*

Scripta Materialia, 236, p.115648_1 - 115648_5, 2023/11

 被引用回数:0 パーセンタイル:0

Work-hardening behavior of a lath martensitic Fe-18Ni alloy during tensile deformation is discussed based on the Taylor's equation. The dislocation characteristics are monitored using in situ neutron diffraction. In the specimens of as-quenched (AQ) and tempered at 573 K (T573), the dislocations are extremely dense and randomly arranged. The dislocations in AQ and T573 form dislocation cells as deformation progresses. Consequently, a composite condition comprising cell walls and cell interiors is formed, and the coefficient $$alpha$$ in the Taylor's equation increases. Cells are already present in the specimen tempered at 773 K (T773), which has a low dislocation density and a large fraction of edge-type dislocations. As deformation continues, the dislocation density of T773 increases, its cell size decreases, and its composite condition become stronger. Simultaneously, the edge-type dislocation fraction decreases, keeping $$alpha$$ unchanged. Thus, both the dislocation arrangement and character affected $$alpha$$, thereby affecting the work-hardening behavior.

論文

Measurement of mechanical behavior of $$^{11}$$B-enriched MgB$$_{2}$$ wire using a pulsed neutron source

町屋 修太郎*; 長村 光造*; 菱沼 良光*; 谷口 博康*; Harjo, S.; 川崎 卓郎

Quantum Beam Science (Internet), 7(4), p.34_1 - 34_17, 2023/10

Measuring the actual strain on the MgB$$_2$$ filaments are of paramount importance, since tensile stress and strain diminish the critical current. In this study, the strain measurement using neutron diffraction during tensile loading was established. We fabricated a MgB$$_2$$ wire enriched with boron-11, an isotope having a smaller neutron absorption cross- section than natural boron, and succeeded in obtaining changes in the lattice constant under tensile loading through Rietveld analysis.

論文

Quantitatively evaluating the huge L$"u$ders band deformation in an ultrafine grain stainless steel by combining ${it in situ}$ neutron diffraction and digital image correlation analysis

Mao, W.; Gao, S.*; Gong, W.; Harjo, S.; 川崎 卓郎; 辻 伸泰*

Scripta Materialia, 235, p.115642_1 - 115642_6, 2023/10

 被引用回数:0 パーセンタイル:0

本研究では、巨大なリューダースバンド変形を示す超微細粒(UFG)ステンレス鋼の引張その場中性子回折とデジタル画像相関測定を行い、バンド伝播中の歪硬化に対するオーステナイト母相と変形誘起マルテンサイトの個々の寄与を評価した。定量的解析の結果、UFG構造によって流動応力が大幅に増加した場合、オーステナイト母相のひずみ硬化は均一な変形を維持するには不十分であることがわかった。リューダースバンドの伝播に必要なひずみ硬化は、マルテンサイトの形成とその内部の高い内部応力によってもたらされた。

論文

Strengthening of $$alpha$$Mg and long-period stacking ordered phases in a Mg-Zn-Y alloy by hot-extrusion with low extrusion ratio

Harjo, S.; Gong, W.; 相澤 一也; 川崎 卓郎; 山崎 倫昭*

Acta Materialia, 255, p.119029_1 - 119029_12, 2023/08

 被引用回数:1 パーセンタイル:94.84(Materials Science, Multidisciplinary)

An as-cast sample and two hot-extruded samples with different extrusion ratios (R) of Mg$$_{97}$$Zn$$_{1}$$Y$$_{2}$$ alloy containing the HCP $$alpha$$ matrix ($$alpha$$Mg) and the long-period stacking ordered phase (LPSO) of about 25-vol%, were used in tensile deformation in situ neutron diffraction experiments, to elucidate the effects of uniquely different microstructural evolutions in $$alpha$$Mg and LPSO with varying the R value to the mechanical properties. $$alpha$$Mg behaved as the soft phase and LPSO as the hard phase, and hot-extrusion improved the strength of both. At the R value of 5.0, a bimodal microstructure was created in $$alpha$$Mg, increasing largely the yield strength of $$alpha$$Mg. With increasing the R value to 12.5, the bimodal microstructure of $$alpha$$Mg collapsed and the yield strength of $$alpha$$Mg decreased. However, the strength of LPSO increased monotonously with increasing the R value due to the developments of kink bands and texture.

論文

${it In situ}$ neutron diffraction study on the deformation behavior of the plastic inorganic semiconductor Ag$$_{2}$$S

Wang, Y.*; Gong, W.; 川崎 卓郎; Harjo, S.; Zhang, K.*; Zhang, Z. D.*; Li, B.*

Applied Physics Letters, 123(1), p.011903_1 - 011903_6, 2023/07

 被引用回数:0 パーセンタイル:59.51

Bulk Ag$$_{2}$$S is a plastic inorganic semiconductor at room temperature. It exhibits a compressive strain greater than 50%, which is highly different from brittle conventional counterparts, such as silicon. Here, we present the experimental investigation of the deformation behavior in a plastic inorganic semiconductor Ag$$_{2}$$S using ${it in situ}$ neutron diffraction during compressive deformation at room and elevated temperatures. At room temperature, the lattice strain partitioning among $$hkl$$-orientated grain families could be responsible for the significant work-hardening behavior in the bulk Ag$$_{2}$$S with a monoclinic structure. The rapid accumulation of lattice defects and remarkable development of the deformation texture suggest that dislocation slip promotes plasticity. At 453 K, a monoclinic phase transforms into a body-centered cubic phase. A stress plateau appears at $$sim$$-4.8 MPa, followed by a rehardening state. The deformation mode of bulk Ag$$_{2}$$S at the initial stage is likely attributable to the migration of silver ions, and as strain increases, it is closer to that of room temperature, leading to rehardening.

論文

Lattice parameters of austenite and martensite during transformation for Fe-18Ni alloy investigated through ${it in situ}$ neutron diffraction

Gong, W.; Harjo, S.; 友田 陽*; 諸岡 聡; 川崎 卓郎; 柴田 曉伸*; 辻 伸泰*

Acta Materialia, 250, p.118860_1 - 118860_16, 2023/05

 被引用回数:0 パーセンタイル:77.63(Materials Science, Multidisciplinary)

Martensitic transformation is accompanied by the generation of microscale and macroscale internal stresses during cooling below the martensitic transformation start temperature. These internal stresses have been determined through X-ray or neutron diffraction, but the reported results are not consistent, probably because the measured lattice parameter is influenced not only by the internal stress but also by several factors, including solute elements and crystal defects. Therefore, ${it in situ}$ neutron diffraction combined with dilatometry measurements during martensitic transformation and subsequent cyclic tempering were performed for an Fe-18Ni alloy. The phase strains calculated by lattice parameter variations show that a hydrostatic compressive strain in austenite and a tensile strain in martensite arose as the martensitic transformation progressed during continuous cooling or isothermal holding. However, the phase stresses of austenite and martensite estimated from these strains failed to hold stress balance law when dense crystal defects involved in the processes. After these crystal defects were removed by appropriate tempering, the stress balance law held well. Meanwhile, the phase stresses of austenite and martensite were changed to opposite, revealing their true identity. Various crystal defects in austenite and martensite, introduced by plastic accommodation, were suggested to affect their lattice parameters and then their phase stresses.

論文

Competitive strengthening between dislocation slip and twinning in cast-wrought and additively manufactured CrCoNi medium entropy alloys

Woo, W.*; Kim, Y. S.*; Chae, H. B.*; Lee, S. Y.*; Jeong, J. S.*; Lee, C. M.*; Won, J. W.*; Na, Y. S.*; 川崎 卓郎; Harjo, S.; et al.

Acta Materialia, 246, p.118699_1 - 118699_13, 2023/03

 被引用回数:4 パーセンタイル:97.51(Materials Science, Multidisciplinary)

In situ neutron diffraction experiments have been performed under loading in cast-wrought (CW) and additively manufactured (AM) equiatomic CoCrNi medium-entropy alloys. The diffraction line profile analysis correlated the faulting-embedded crystal structure to the dislocation density, stacking/twin fault probability, and stacking fault energy as a function of strain. The results showed the initial dislocation density of 1.8$$times$$10$$^{13}$$ m$$^{-2}$$ in CW and 1.3$$times$$10$$^{14}$$ m$$^{-2}$$ in AM. It significantly increased up to 1.3$$times$$10$$^{15}$$ m-$$^{-2}$$ in CW and 1.7$$times$$10$$^{15}$$ m$$^{-2}$$ in AM near fracture. The dislocation density contributed to the flow stress of 470 MPa in CW and 600 MPa in AM, respectively. Meanwhile, the twin fault probability of CW (2.7%) was about two times higher than AM (1.3%) and the stacking fault probability showed the similar tendency. The twinning provided strengthening of 360 MPa in CW and 180 MPa in AM. Such a favorable strengthening via deformation twinning in CW and dislocation slip in AM was attributed to the stacking fault energy. It was estimated as 18.6 mJ/m$$^{2}$$ in CW and 37.5 mJ/m$$^{2}$$ in AM by the strain field of dislocations incorporated model. Dense dislocations, deformation twinning, and atomic-scale stacking structure were examined by using electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM).

論文

Neutron stress measurement of W/Ti composite in cryogenic temperatures using time-of-flight method

西田 真之*; Harjo, S.; 川崎 卓郎; 山下 享介*; Gong, W.

Quantum Beam Science (Internet), 7(1), p.8_1 - 8_15, 2023/03

In this study, the thermal stress alterations generated in a tungsten fiber reinforced titanium composite (W/Ti composite) were evaluated by the neutron stress measurement method at cryogenic temperatures. The W/Ti composite thermal loads were repeated from room temperature to the cryogenic temperature (10 K), and alterations in thermal residual stress were evaluated using the neutron in situ stress measurement method. In this measurement, the stress alterations in the titanium matrix and the tungsten fibers were measured. This measurement was carried out by TAKUMI (MLF-BL19) of J-PARC, a neutron research facility in the Japan Atomic Agency. The measurement method of TAKUMI is the time-of-flight (TOF) method. Owing to this measurement method, the measurement time was significantly shortened compared to the angle-dispersion type measurement by a diffractometer. As a result of the measurement, large compressive stresses of about 1 GPa were generated in the tungsten fibers, and tensile stresses of about 100 MPa existed in the titanium matrix. The thermal stresses due to the temperature change between room temperature and cryogenic temperature is caused by the difference of thermal expansions between the tungsten fibers and the titanium matrix, and these stress values can be approximated by a simple elastic theory equation.

論文

Compressive deformation behavior of AZ31 alloy at 21K; An ${it In situ}$ neutron diffraction study

Gong, W.; 川崎 卓郎; Zheng, R.*; 眞山 剛*; Sun, B.*; 相澤 一也; Harjo, S.; 辻 伸泰*

Scripta Materialia, 225, p.115161_1 - 115161_5, 2023/03

 被引用回数:2 パーセンタイル:48.15(Nanoscience & Nanotechnology)

Deformation behavior during uniaxial compression at 21 K and 298 K in a commercial AZ31 magnesium alloy was studied by ${it in situ}$ neutron diffraction. Decreasing the deformation temperature resulted in a slight increase in yield stress (115 MPa $$rightarrow$$ 139 MPa), but a remarkable enhancement in both the fracture stress (365 MPa $$rightarrow$$ 551 MPa) and fracture strain (12.8% $$rightarrow$$ 16.5%). The low temperature sensitivity of the {10$$overline{1}$$2} extension twinning which governed the macroscopic yielding led to the slight increase in yield stress. At 21K, basal slip was suppressed, while the extension twinning was promoted resulted in higher twin volume fraction. In the late stage of deformation, the {10$$overline{1}$$1}-{10$$overline{1}$$2} double twinning was suppressed, which is considered to be the reason to delay the fracture at 21 K.

論文

Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy

Lam, T.-N.*; Chin, H.-H.*; Zhang, X.*; Feng, R.*; Wang, H.*; Chiang, C.-Y.*; Lee, S. Y.*; 川崎 卓郎; Harjo, S.; Liaw, P. K.*; et al.

Acta Materialia, 245, p.118585_1 - 118585_9, 2023/02

 被引用回数:2 パーセンタイル:73.49(Materials Science, Multidisciplinary)

The present study investigates the crystallographic-texture effects on the improved fatigue resistance in the CoCrFeMnNi high-entropy alloys (HEAs) with the full-size geometry of the ASTM Standards E647-99. We exploited X-ray nano-diffraction mapping to characterize the crystal-deformation levels ahead of the crack tip after stress unloading under both constant- and tensile overloaded-fatigue conditions. The crack-tip blunting-induced much higher deformation level was concentrated surrounding the crack-tip which delays the fatigue-crack growth immediately after a tensile overload. The predominant deformation texture orientation in the Paris regime was investigated, using electron backscatter diffraction and orientation distribution function analyses. The twinning formation-driven shear deformation gave rise to the development of the Goss-type texture within the plastic deformation regime under a tensile-overloaded-fatigue condition, which was attributed to enhance the crack deflection and thus the tensile induced crack-growth-retardation period in the CoCrFeMnNi HEA.

論文

Effect of extrusion ratio in hot-extrusion on kink deformation during compressive deformation in an $$alpha$$Mg/LPSO dual-phase magnesium alloy monitored by ${it in situ}$ neutron diffraction

Harjo, S.; Gong, W.; 相澤 一也; 川崎 卓郎; 山崎 倫昭*; 眞山 剛*; 河村 能人*

Materials Transactions, 64(4), p.766 - 773, 2023/02

 被引用回数:1 パーセンタイル:87.31(Materials Science, Multidisciplinary)

To elucidate the effect of extrusion ratio in hot-extrusion on the deformation behavior during compression of Mg$$_{97}$$Zn$$_{1}$$Y$$_{2}$$ alloy containing about 25-vol% long-period stacking ordered phase (LPSO) in the HCP structured $$alpha$$ matrix ($$alpha$$Mg), ${it in situ}$ neutron diffraction measurements were performed under compressive loading using four types of samples: as-cast and after hot extrusion at 623 K with extrusion ratios of 5.0, 7.5 and 12.5. The macroscopic yielding was observed to appear by the occurrence of basal slip of $$alpha$$Mg in the as-cast sample and at the onset of twinning in the hot extruded samples. The applied stress to initiate slip, twinning, and kinking increased by hot extrusion and then decreased with increasing extrusion ratio. LPSO shared higher stress than $$alpha$$Mg and the ratio to the strength increased as the extrusion ratio increased.

論文

Stress partitioning between bcc and cementite phases discussed from phase stress and dislocation density in martensite steels

土田 紀之*; 上路 林太郎*; Gong, W.; 川崎 卓郎; Harjo, S.

Scripta Materialia, 222, p.115002_1 - 115002_6, 2023/01

 被引用回数:4 パーセンタイル:67.13(Nanoscience & Nanotechnology)

The present study investigated the tensile deformation behavior of quenched and tempered martensite steels at various austenitization and tempering temperatures using in situ neutron diffraction experiments. Phase lattice strains in the bcc and cementite ($$theta$$) phases and dislocation structures in the bcc phase were analyzed. The phase lattice strain in bcc became almost stagnant after yielding as the tempering temperature increased. The phase lattice strain in $$theta$$ increased linearly with an increase in the flow stress, independent of the austenitization and tempering temperatures. The stress partitioning between bcc and $$theta$$ was confirmed after the yielding of bcc, which contributed to the work hardening. The phase stresses of bcc and $$theta$$ and their stress partitioning improve the mechanical properties of martensite steels, which can be summarized by the systematic changes in phase lattice strain and dislocation properties due to the austenitization and tempering temperatures.

論文

Rearrangement of hydrogen bonds in dehydrated raffinose tetrahydrate; A Time-of-flight neutron diffraction study

川崎 卓郎; 高橋 美和子*; 鬼柳 亮嗣; 大原 高志

Acta Crystallographica Section C; Structural Chemistry (Internet), 78(12), p.743 - 748, 2022/12

 被引用回数:0 パーセンタイル:0.01(Chemistry, Multidisciplinary)

Structural changes of the raffinose crystal on dehydration from the pentahydrate to the tetrahydrate were investigated by single-crystal time-of-flight neutron diffraction. It was revealed that during the dehydration, rearrangement occurs in the hydrogen bonds related to the lost water molecule, while the symmetry of the crystal structure is retained. The hydrogen-bonding status of raffinose pentahydrate and tetrahydrate were discussed comprehensively according to Jeffrey's hydrogen-bonding classification. It was shown that water molecules are hydrogen bonded to the surrounding molecules by ${it moderate}$ O-H...O hydrogen bonds and ${it weak}$ C-H...O hydrogen bonds, and the number of these two types of hydrogen bonds determines the water molecules that are removed by dehydration. The lattice constant c showed a significant decrease on dehydration and further dehydration leads to loss of crystallinity of the raffinose crystals.

論文

Si-addition contributes to overcoming the strength-ductility trade-off in high-entropy alloys

Wei, D.*; Gong, W.; 都留 智仁; Lobzenko, I.; Li, X.*; Harjo, S.; 川崎 卓郎; Do, H.-S.*; Bae, J. W.*; Wagner, C.*; et al.

International Journal of Plasticity, 159, p.103443_1 - 103443_18, 2022/12

 被引用回数:12 パーセンタイル:98.45(Engineering, Mechanical)

Face-centered cubic single-phase high-entropy alloys (HEAs) containing multi-principal transition metals have attracted significant attention, exhibiting an unprecedented combination of strength and ductility owing to their low stacking fault energy (SFE) and large misfit parameter that creates severe local lattice distortion. Increasing both strength and ductility further is challenging. In the present study, we demonstrate via meticulous experiments that the CoCrFeNi HEA with the addition of the substitutional metalloid Si can retain a single-phase FCC structure while its yield strength (up to 65%), ultimate strength (up to 34%), and ductility (up to 15%) are simultaneously increased, owing to a synthetical effect of the enhanced solid solution strengthening and a reduced SFE. The dislocation behaviors and plastic deformation mechanisms were tuned by the addition of Si, which improves the strain hardening and tensile ductility. The present study provides new strategies for enhancing HEA performance by targeted metalloid additions.

論文

${it In situ}$ observation of twinning and detwinning in AZ31 alloy

Gong, W.; Zheng, R.*; Harjo, S.; 川崎 卓郎; 相澤 一也; 辻 伸泰*

Journal of Magnesium and Alloys (Internet), 10(12), p.3418 - 3432, 2022/12

 被引用回数:12 パーセンタイル:93.63(Metallurgy & Metallurgical Engineering)

Twinning and detwinning behavior of a commercial AZ31 magnesium alloy during cyclic compression-tension deformation with a total strain amplitude of 4% ($$pm$$2%) was evaluated using the complementary techniques of ${it in situ}$ neutron diffraction, identical area electron backscatter diffraction, and transmission electron microscopy. In-situ neutron diffraction demonstrates that the compressive deformation was dominated by twin nucleation, twin growth, and basal slip, while detwinning dominated the unloading of compressive stresses and subsequent tension stage. A large number of $$<c>$$-component dislocations observed in twins and the detwinned regions were attributed to the dislocation transmutation during the twinning and detwinning. The accumulation of barriers including twin boundaries and various types of dislocations enhanced the interactions of migrating twin boundary with these barriers during twinning and detwinning, which is considered to be the origin for increasing the work hardening rate in cyclic deformation of the AZ31 alloy.

293 件中 1件目~20件目を表示