Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Niwa, Masakazu; Shimada, Akiomi; Asamori, Koichi; Sueoka, Shigeru; Komatsu, Tetsuya; Nakajima, Toru; Ogata, Manabu; Uchida, Mao; Nishiyama, Nariaki; Tanaka, Kiriha; et al.
JAEA-Review 2024-035, 29 Pages, 2024/09
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2024. The objectives and contents of this research are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Fujita, Natsuko; Yokoyama, Tatsunori; Ogita, Yasuhiro; Fukuda, Shoma; Nakajima, Toru; Kagami, Saya; Ogata, Manabu; et al.
JAEA-Review 2023-017, 27 Pages, 2023/10
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2023. The objectives and contents in fiscal year 2023 are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques.
Niwa, Masakazu; Shimada, Koji; Sueoka, Shigeru; Ishihara, Takanori; Ogawa, Hiroki; Hakoiwa, Hiroaki; Watanabe, Tsuyoshi; Nishiyama, Nariaki; Yokoyama, Tatsunori; Ogata, Manabu; et al.
JAEA-Research 2023-005, 78 Pages, 2023/10
This annual report documents the progress of research and development (R&D) in the 1st fiscal year of the Japan Atomic Energy Agency 4th Medium- and Long-term Plan (fiscal years 2022-2028) to provide the scientific base for assessing geosphere stability for long-term isolation of high-level radioactive waste. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques. The current status of R&D activities with previous scientific and technological progress is summarized.
Iwamoto, Osamu; Iwamoto, Nobuyuki; Kimura, Atsushi; Tada, Kenichi; Sugawara, Takanori; Yokoyama, Kenji
Kaku Deta Nyusu (Internet), (133), p.1 - 6, 2022/10
no abstracts in English
Sasao, Eiji; Ishimaru, Tsuneari; Niwa, Masakazu; Shimada, Akiomi; Shimada, Koji; Watanabe, Takahiro; Sueoka, Shigeru; Yokoyama, Tatsunori; Fujita, Natsuko; Ogita, Yasuhiro; et al.
JAEA-Review 2022-022, 29 Pages, 2022/09
This report is a plan of research and development (R&D) on geosphere stability for long-term isolation of high-level radioactive waste (HLW) in Japan Atomic Energy Agency (JAEA), in fiscal year 2022. The objectives and contents in fiscal year 2022 are described in detail based on the JAEA 4th Medium- and Long-term Plan (fiscal years 2022-2028). In addition, the background of this research is described from the necessity and the significance for site investigation and safety assessment, and the past progress. The plan framework is structured into the following categories: (1) Development and systematization of investigation techniques, (2) Development of models for long-term estimation and effective assessment, (3) Development of dating techniques
Tang, J.*; Seo, O.*; Rivera Rocabado, D. S.*; Koitaya, Takanori*; Yamamoto, Susumu*; Namba, Yusuke*; Song, C.*; Kim, J.*; Yoshigoe, Akitaka; Koyama, Michihisa*; et al.
Applied Surface Science, 587, p.152797_1 - 152797_8, 2022/06
Times Cited Count:7 Percentile:73.94(Chemistry, Physical)The hydrogen absorption and diffusion mechanisms on cube-shaped Pd nanoparticles (NPs) which are important hydrogen-storage materials were studied using X-ray photoelectron spectroscopy and DFT calculations. In the surface region, hydrogen absorption showed almost similar behavior regardless of the NPs size. It was found that the octahedral sites are more favorable than the tetrahedral sites for hydrogen occupation. We also clarified that the hydrogen atoms absorbing on the smaller-sized Pd NPs diffuse to the subsurface more actively because of the weakened Pd-H bond by the surface disordering, which plays an important role in hydrogen adsorption at a low H pressure.
Kobayashi, Takanori*; Matsuoka, Leo*; Yokoyama, Keiichi
Computational and Theoretical Chemistry, 1150, p.40 - 48, 2019/02
Times Cited Count:1 Percentile:1.96(Chemistry, Physical)One of important research targets in the development of cesium isotope separation system is design of recovery process of cesium atom. Relevant to this research target, the reaction cross section and reaction rate constant of a cesium exchange reaction through collision of the cesium iodide molecules with cesium atoms are calculated by a quasi-classical trajectory calculation based on a potential energy surface obtained by quantum chemistry calculations. Consequently, the rate constant is calculated to be 3.6 10 cmmolecules, as large as collision rate in the present condition. In addition, slightly positive temperature dependence is observed in the rate constant. This behavior is explained with the long-range attractive force and effect of subsequent dissociation process.
Yokoyama, Kenji; Kitada, Takanori*
Journal of Nuclear Science and Technology, 56(1), p.87 - 104, 2019/01
Times Cited Count:4 Percentile:40.00(Nuclear Science & Technology)no abstracts in English
Yokoyama, Kenji; Kitada, Takanori*
Proceedings of 2018 International Congress on Advances in Nuclear Power Plants (ICAPP 2018) (CD-ROM), p.1221 - 1230, 2018/04
no abstracts in English
Yokoyama, Kenji; Yamamoto, Akio*; Kitada, Takanori*
Journal of Nuclear Science and Technology, 55(3), p.319 - 334, 2018/03
Times Cited Count:8 Percentile:61.87(Nuclear Science & Technology)A new formulation of the cross-section adjustment methodology with the dimensionality reduction technique has been derived. This new formulation is proposed as the dimension reduced cross-section adjustment method (DRCA). Since the derivation of DRCA is based on the minimum variance unbiased estimation (MVUE), an assumption of normal distribution is not required. The result of DRCA depends on a user-defined matrix that determines the dimension reduced feature subspace. We have examine three variations of DRCA, namely DRCA1, DRCA2, and DRCA3. Mathematical investigation and numerical verification have revealed that DRCA2 is equivalent to the currently widely used cross-section adjustment method. Moreover, DRCA3 is found to be identical to the cross-section adjustment method based on MVUE, which has been proposed in the previous study.
Kobayashi, Takanori*; Matsuoka, Leo*; Yokoyama, Keiichi
Nihon Enerugi Gakkai-Shi, 96(10), p.441 - 444, 2017/10
To investigate the reaction cross section of the cesium exchange reaction of CsI (v = 0, j = 0) + Cs Cs + ICs, we performed quasi-classical trajectory calculations on the potential energy surface calculated by the ab initio molecular orbital theory. The potential energy surface shows that intermediate CsI is formed without entrance barrier and has two equivalent Cs-I bonds. The reaction cross sections decrease monotonically with increasing collision energy. The rate constant k (v = 0, j = 0) was estimated to be about 310cm molecules at temperatures ranging from 500 to 1200K and a slight negative temperature dependence was observed.
Kobayashi, Takanori; Yokoyama, Keiichi
Journal of Nuclear Science and Technology, 53(10), p.1489 - 1493, 2016/10
Times Cited Count:6 Percentile:48.81(Nuclear Science & Technology)Theoretical investigation for the adsorption of the cesium atom (Cs), the cesium iodide molecule (CsI), the iodine atom (I), the cesium cation (Cs), and the iodide anion (I) onto the surface of a single fullerene molecule (C) are reported. A hybrid exchange-correlation functional using the Coulomb-attenuating method (CAM-B3LYP) is employed. The adsorption energies, i.e., the opposite of enthalpy change through adsorption, are calculated to be 34, 3, 2, 11, and 12 kcal mol for Cs, CsI, I, Cs, and I, respectively. The equilibrium constant for Cs is calculated to be 710 atm at the temperature of 1000 K and is seven orders of magnitude higher than that for CsI, indicating that the C molecule adsorb the Cs atom highly selectively against the CsI molecule.
Kobayashi, Takanori; Hashimoto, Masashi; Yokoyama, Keiichi
JAEA-Research 2015-014, 7 Pages, 2015/12
To discuss the exchange reaction of Cs isotope by CsI + Cs' Cs + ICs', the structure and chemical properties of CsI intermediate and potential energy surface are calculated using M06/def2-TZVPPD density functional calculation. The calculation shows that the reaction to the intermediate has no barrier and the two Cs-I bonds of CsI are chemically equivalent. Thus, the collision of CsI + Cs' results in Cs exchange with the high probability.
Enoeda, Mikio; Tanigawa, Hisashi; Hirose, Takanori; Nakajima, Motoki; Sato, Satoshi; Ochiai, Kentaro; Konno, Chikara; Kawamura, Yoshinori; Hayashi, Takumi; Yamanishi, Toshihiko; et al.
Fusion Engineering and Design, 89(7-8), p.1131 - 1136, 2014/10
Times Cited Count:21 Percentile:83.69(Nuclear Science & Technology)The development of a Water Cooled Ceramic Breeder (WCCB) Test Blanket Module (TBM) is being performed as one of the most important steps toward DEMO blanket in Japan. Regarding the fabrication technology development using F82H, the fabrication of a real scale mockup of the back wall of TBM was completed. Also the assembling of the complete box structure of the TBM mockup and planning of the pressurization testing was studied. The development of advanced breeder and multiplier pebbles for higher chemical stability was performed for future DEMO blanket application. From the view point of TBM test result evaluation and DEMO blanket performance design, the development of the blanket tritium simulation technology, investigation of the TBM neutronics measurement technology and the evaluation of tritium production and recovery test using D-T neutron in the Fusion Neutronics Source (FNS) facility has been performed.
Hirose, Takanori; Tanigawa, Hisashi; Yoshikawa, Akira; Seki, Yohji; Tsuru, Daigo; Yokoyama, Kenji; Ezato, Koichiro; Suzuki, Satoshi; Enoeda, Mikio; Akiba, Masato
Fusion Engineering and Design, 86(9-11), p.2265 - 2268, 2011/10
Times Cited Count:5 Percentile:38.41(Nuclear Science & Technology)As one of the most important fabrication technologies of the WCCB TBM, Hot Isostatic Pressing (HIP) joining technology was selected to fabricate the first wall with built-in cooling channel structure made of reduced activation martensitic/ferritic steel, F82H. By using developed HIP technology, a real scale TBM first wall mockup was successfully fabricated. High heat flux test of the fabricated mockup showed the feasibility to with the equivalent conditions of the WCCB TBM operation. The breeder pebble box was successfully fabricated with thin wall cooling pipes and thin plate sleds by Laser welding. With respect to the side walls with built in cooling channels were also fabricated using drilling technology. Assembling of the first wall and side walls is one of the critical fabrication processes of the fabrication of the TBM structure. By using a F82H first wall mockup and side wall mockups, assembling process was demonstrated successfully by Electron Beam welding.
Seki, Yohji; Onishi, Yoichi*; Yoshikawa, Akira; Tanigawa, Hisashi; Hirose, Takanori; Ozu, Akira; Ezato, Koichiro; Tsuru, Daigo; Suzuki, Satoshi; Yokoyama, Kenji; et al.
Progress in Nuclear Science and Technology (Internet), 2, p.139 - 142, 2011/10
R&D of a test blanket module (TBM) with a water-cooled solid breeder has been performed for ITER. For our design, the temperature of a coolant pressurized up to 15 MPa is designed as 598 K in an outlet of the TBM, respectively. Establishment of estimation methods of the flow phenomena is important for designs of the channel network and predictions of the material corrosion and erosion. A purpose of our research is to establish and verify the method for the prediction of the flow phenomena. The Large-eddy simulation and Reynolds averaged Navier-Stokes simulation have been performed to predict the pressure drop and flow rates in the channels of the side wall. It results the inhomogeneous flow rates in each channel. At viewpoint of the heat removal capability, however, the smallest flow-rates near the first wall are evaluated with satisfying acceptance criteria. Moreover, the results of the numerical simulation correspond with those of experiment performed for the real size mock-up.
Ezato, Koichiro; Seki, Yohji; Tanigawa, Hisashi; Hirose, Takanori; Tsuru, Daigo; Nishi, Hiroshi; Dairaku, Masayuki; Yokoyama, Kenji; Suzuki, Satoshi; Enoeda, Mikio
Fusion Engineering and Design, 85(7-9), p.1255 - 1260, 2010/12
Times Cited Count:12 Percentile:62.11(Nuclear Science & Technology)no abstracts in English
Seki, Yohji; Onishi, Yoichi*; Yoshikawa, Akira; Tanigawa, Hisashi; Hirose, Takanori; Ozu, Akira; Ezato, Koichiro; Tsuru, Daigo; Suzuki, Satoshi; Yokoyama, Kenji; et al.
Proceedings of Joint International Conference of 7th Supercomputing in Nuclear Application and 3rd Monte Carlo (SNA + MC 2010) (USB Flash Drive), 4 Pages, 2010/10
R&D of a test blanket module (TBM) with a water-cooled solid breeder has been performed for ITER. For our design, the temperature of a coolant pressurized up to 15 MPa is designed as 598 K in an outlet of the TBM, respectively. Establishment of estimation methods of the flow phenomena is important for designs of the channel network and predictions of the material corrosion and erosion. A purpose of our research is to establish and verify the method for the prediction of the flow phenomena. The Large-eddy simulation and Reynolds averaged Navier-Stokes simulation have been performed to predict the pressure drop and flow rates in the channels of the side wall. It results the inhomogeneous flow rates in each channel. At viewpoint of the heat removal capability, however, the smallest flow-rates near the first wall are evaluated with satisfying acceptance criteria. Moreover, the results of the numerical simulation correspond with those of experiment performed for the real size mockup.
Enoeda, Mikio; Hirose, Takanori; Tanigawa, Hisashi; Tsuru, Daigo; Yoshikawa, Akira; Seki, Yohji; Nishi, Hiroshi; Yokoyama, Kenji; Ezato, Koichiro; Suzuki, Satoshi
Proceedings of 18th International Conference on Nuclear Engineering (ICONE-18) (CD-ROM), p.645 - 649, 2010/05
This paper overviews the research and development activity of Water Cooled Ceramic Breeder (WCCB) Blanket in Japan. Japan is performing development of WCCB Blanket as the primary candidate of the breeding blanket for the fusion DEMO reactor. Regarding the development of blanket module fabrication technology, a real scale First Wall (FW) was fabricated using Reduced Activation Ferritic Martensitic Steel (RAFMS) F82H. Using fabricated FW mockup, thermo-hydraulic performance and high heat flux tests were successfully performed with the heat flux equivalent to ITER TBM condition, 0.5 MW/m, 80 cycles with the coolant condition as DEMO, 15 MPa 300 C. Also, real scale Side Wall (SW) and real scale breeder pebble bed structure have been successfully fabricated. Furthermore, assembling of the real scale FW plate mockup and SW plate mockup was successfully performed. Development of major key technologies for the WCCB TBM structure fabrication has been almost completed.
Yoshikawa, Akira; Tanigawa, Hisashi; Seki, Yohji; Hirose, Takanori; Tsuru, Daigo; Ezato, Koichiro; Yokoyama, Kenji; Nishi, Hiroshi; Suzuki, Satoshi; Tanzawa, Sadamitsu; et al.
JAEA-Technology 2009-077, 23 Pages, 2010/03
In the side wall of TBM, parallel flow channels are considered. In the cooling channels structure, the flow distribution probably arises from the pressure drop in the channels. The purpose of this study is to clarify the water flow distribution in the side wall and design the cooling channels structure so that structural material of the side wall can be kept under the allowable temperature. The structural material for assumed flow rates and the flow distribution were estimated, and then the cooling channels structure was designed. The design was verified using the mockup made of the vinyl chloride pipe. For the verified design, the mockup made of F82H is manufactured, and the water flow distribution and the pressure drop were measured. It was found that the heat removal capability was sufficient in this design. From these results, the design for the cooling channels structure in the side wall is established so that enough water flow to cool the structural material is kept.