検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 28 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Visualization of radioactive substances using a freely moving gamma-ray imager based on Structure from Motion

佐藤 優樹; 峯本 浩二郎*; 根本 誠*; 鳥居 建男

Journal of Nuclear Engineering and Radiation Science, 7(4), p.042003_1 - 042003_12, 2021/10

Technology for measuring and identifying the positions and distributions of radioactive substances is important for decommissioning work sites at nuclear power stations. A three-dimensional (3D) image reconstruction method that locates radioactive substances by integrating Structure-from-Motion (SfM) with a Compton camera (a type of gamma-ray imager) has been developed. From the photographs captured while freely moving in an experimental environment, a 3D structural model of the experimental environment was created. By projecting the radioactive substance image acquired by the Compton camera on the 3D structural model, the positions of the radioactive substance were visualized in 3D space. In a demonstration study, the $$^{137}$$Cs-radiation source was successfully visualized in the experimental environment captured by the freely moving cameras. In addition, how the imaging accuracy is affected by uncertainty in the self-localization of the Compton camera processed by SfM, and by positional uncertainty in the gamma-ray incidence determined by the sensors of the Compton camera was investigated. The created map depicts the positions of radioactive substances inside radiation work environments, such as decommissioning work sites at nuclear power stations.

論文

3D position and radioactivity estimation of radiation source by a simple directional radiation detector combined with structure from motion

佐藤 優樹; 峯本 浩二郎*; 根本 誠*

Radiation Measurements, 142, p.106557_1 - 106557_6, 2021/03

 被引用回数:2 パーセンタイル:32.89(Nuclear Science & Technology)

It is important to visualize radioactive substances' position and distribution and estimate their radioactivity levels to reduce the exposure dose of workers in radioactive areas (such as decommissioning worksites of nuclear power stations) and improve nuclear security functions. To visualize the radioactive substance's three-dimensional (3D) location, a directional radiation detector with a cylindrical shield on a simple single-pixel gamma-ray detector was applied to the structure from motion (SfM) technology using an ordinary digital camera. Verification was performed by a system that combines SfM with a CdTe sensor probe having narrow directivity. $$^{241}$$Am radiation source's position was visualized by drawing the radiation source's image acquired by the gamma-ray detector on the work area 3D model reconstructed through SfM. Furthermore, as SfM is a simultaneous localization and mapping technology, the system measures the gamma rays while measuring the gamma-ray detector's dynamic position and posture information. The measurements can be acquired while the gamma-ray detector is freely moving in the work area. These methods visualized the radiation source's position and quantitatively estimated the radiation source's radioactivity.

論文

Automatic data acquisition for visualizing radioactive substances by combining a gamma-ray imager and an autonomous mobile robot

佐藤 優樹; 峯本 浩二郎*; 根本 誠*; 鳥居 建男

Journal of Instrumentation (Internet), 16(1), p.P01020_1 - P01020_18, 2021/01

 被引用回数:1 パーセンタイル:9.76(Instruments & Instrumentation)

To reduce the exposure doses of workers and to establish decontamination plans, it is important to understand and visualize the distribution of radioactive substances at the Fukushima Daiichi Nuclear Power Station in Japan, where an accident occurred on the 11th of March, 2011. In this decommissioning work environment, radioactive substances adhered to various objects, such as rubble and equipment, and it was necessary to visualize the distribution of these contaminants in all three dimensions. The technology used to automatically and remotely acquire data to visualize the distribution of radioactive substances in three dimensions was useful for reducing the exposure dose of the workers and to shorten the survey time. We constructed an automatic data acquisition system that consisted of a Compton camera and a 3D-light detection and ranging sensor mounted on an autonomously moving robot. We also evaluated the system feasibility using radiation sources and succeeded in automatically acquiring the data required for visualizing the radiation sources. For this data acquisition, the operator did not need to operate the system after the measurements were started. The effects of the imaging parameters of the Compton camera and the accuracy of the self-position estimation of the system on the radiation-imaging accuracy are also discussed.

論文

Construction of virtual reality system for radiation working environment reproduced by gamma-ray imagers combined with SLAM technologies

佐藤 優樹; 峯本 浩二郎*; 根本 誠*; 鳥居 建男

Nuclear Instruments and Methods in Physics Research A, 976, p.164286_1 - 164286_6, 2020/10

 被引用回数:12 パーセンタイル:88.35(Instruments & Instrumentation)

The Fukushima Daiichi Nuclear Power Station (FDNPS), operated by Tokyo Electric Power Company Holdings, Inc., experienced a meltdown as a result of a large tsunami caused by the Great East Japan Earthquake on March 11, 2011. At that time, it was necessary to understand the aspects of the decommissioning working environment inside the FDNPS, such as establishing how the radioactive substances were distributed across the site, for work to be done efficiently without exposure to large amounts of radiation. Therefore, virtual reality (VR) emerged as a solution. There have been previous reports done on a technique for visualizing the distribution of radioactive substances in three dimensions utilizing a freely moving gamma-ray imager combined with simultaneous localization and mapping (SLAM) technology. In this paper, we introduce imaging technologies for the acquisition of image data from radioactive substances and three-dimensional (3D) structural models of the working environment, using a freely moving gamma-ray imager combined with SLAM technology. For this research, we also constructed a VR system and displayed the 3D data in a VR space, which enables users to experience the actual working environment without radiation exposure. In creating the VR system, any user can implement this method by donning an inexpensive head-mounted display apparatus and using a free, or low-cost, application software.

論文

Remote detection of radioactive hotspot using a Compton camera mounted on a moving multi-copter drone above a contaminated area in Fukushima

佐藤 優樹; 小澤 慎吾*; 寺阪 祐太; 峯本 浩二郎*; 田村 智志*; 新宮 一駿*; 根本 誠*; 鳥居 建男

Journal of Nuclear Science and Technology, 57(6), p.734 - 744, 2020/06

 被引用回数:18 パーセンタイル:93.26(Nuclear Science & Technology)

The Fukushima Daiichi Nuclear Power Station, operated by Tokyo Electric Power Company Holdings, Inc., suffered a meltdown as a result of a large tsunami triggered by the Great East Japan Earthquake on March 11, 2011. To proceed with the environmental recovery by decontamination, drawing a radiation distribution map that can indicate the distribution of radioactive substances is extremely important to establish detailed decontamination plans. We developed a remote radiation imaging system consisting of a lightweight Compton camera and a multi-copter drone to remotely measure the distribution of the radioactive substances. This system can perform radiation imaging using a Compton camera while flying and moving. In addition, it is also possible to draw the distribution of radioactive substances three-dimensionally by projecting the radiation image measured with the Compton camera on a three-dimensional topography model separately acquired by a 3D-LiDAR. We conducted a survey of radioactive hotspots in difficult-to-return zone in the coastal area of Fukushima, Japan. The drone system succeeded in three-dimensional visualization of several hotspots deposited on the ground. Such remote technology would be useful not only for monitoring the difficult-to-return zone, but also for monitoring distribution of radioactive substances inside the site of the FDNPS where decommissioning work is ongoing.

論文

オーステナイト系ステンレス鋼の中性子照射による磁気特性変化に関する研究

根本 義之; 大石 誠; 伊藤 正泰; 加治 芳行; 欅田 理*

保全学, 14(4), p.83 - 90, 2016/01

これまで中性子照射したオーステナイトステンレス合金の照射誘起応力腐食割れ(IASCC)感受性と、渦電流法,交流磁化法で測定した磁気データの間に相関性があることを報告してきた。この相関性のメカニズムを検討するため、本研究では当該試験片の微細組織観察を行い、結晶粒界に沿った強磁性のパーマロイ(FeNi$$_{3}$$)の生成を確認した。この結果から照射による磁気特性変化の原因は結晶粒界での照射誘起の磁性相生成によるものであり、IASCC感受性と磁気データの相関に関連しているものと考えられる。また高感度,高位置分解能の新規センサープローブの開発を行い、SUS304オーステナイトステンレス鋼照射材の磁気測定に適用した。SUS304の試験片には照射前からフェライト相が存在していたため、照射後の材料の磁気測定に悪影響を及ぼす可能性が懸念されたが、実験結果においては照射量に依存した磁気データの上昇が捉えられた。そのため本研究で開発した磁気測定の技術は照射前からフェライト相を含むオーステナイトステンレス鋼照射材にも適用可能であることが示されたと考えられる。

論文

オーステナイトステンレス鋼の中性子照射による磁気特性変化に関する研究

根本 義之; 大石 誠; 伊藤 正泰; 加治 芳行

日本保全学会第12回学術講演会要旨集, p.105 - 112, 2015/07

これまで原子炉構造材として使用されるオーステナイトステンレス鋼の中性子照射に基づく材料劣化をき裂等の発生以前の予兆段階で渦電流法、交流磁化法等の磁気的手法により検知する技術開発に関連した研究成果を報告してきた。SUS304等の材料では照射以前から材料中に存在するフェライト相等の磁性相からの磁気信号が、照射による磁気変化の検知を阻害する可能性が考えられるため、本研究では、SUS304照射材の磁気測定を行い、照射量に依存した磁気変化が検知可能であることを確認した。また粒界割れ等の材料劣化と磁気データの相関に関与すると考えられる、照射材の結晶粒界での磁性相生成を透過型電子顕微鏡観察により確認した。以上の成果を報告する。

論文

5年間統計気象資料の年間平均地表空気中濃度への適用性について; JAEA大洗研究開発センターで観測された20年間の気象データの評価から

瀬谷 夏美; 橋本 周; 根本 浩司*; 清水 武彦; 高崎 浩司

保健物理, 49(1), p.29 - 38, 2014/03

気体廃棄物等の拡散計算から年間の平均的な気象条件を用いて試算する年間平均地表空気中濃度(以下、「年間平均濃度」)は原子炉等施設における平常運転時の線量評価の主要因子である。したがって線量評価は年間平均濃度の年変動の影響を受けるため、評価には敷地を代表する年間平均濃度の選定が必要である。原子力機構大洗研究開発センター(JAEA大洗)では、任意の連続する5年間の気象データを1年間に規格化した統計処理から年間平均濃度(以下、「5年平均濃度」)を評価している。これは年変動の相殺が期待されるためである。本報告では、5年平均濃度の代表性を確認するため、JAEA大洗にて同条件で継続観測した1991年$$sim$$2010年までの気象観測データをもとに平常運転時の解析に用いる年間平均濃度を1年平均濃度と5年平均濃度とで解析し、20年間の変動の範囲及びその濃度分布のなす一般的統計特性を評価した。結果は、いずれの5年平均濃度も1年平均濃度の変動より小さく、また5年平均濃度の分布は、20年間で不良標本検定(危険率5%のF検定)により棄却される濃度はなかった。平常運転時の安全評価に用いる上で、いずれの5年平均濃度もJAEA大洗を代表させる解析に適用し得ることが確認された。

論文

Proton generation and terahertz radiation from a thin-foil target with a high-intensity laser

匂坂 明人; Pirozhkov, A. S.; 森 道昭; 余語 覚文; 小倉 浩一; 織茂 聡; 西内 満美子; Ma, J.*; 桐山 博光; 金沢 修平; et al.

レーザー研究, 38(9), p.702 - 705, 2010/09

高強度レーザーと薄膜との相互作用により、高エネルギーの粒子,硬X線,高次高調波,テラヘルツ(THz)波などが発生する。特に高エネルギー陽子については、医療用としての小型加速器への利用が期待されている。本研究では、薄膜ターゲット照射による陽子ビームとTHz波の同時発生について調べた。原子力機構設置のチタンサファイアレーザー(J-KAREN)を用いて、薄膜ターゲットへの照射実験を行った。その結果、ターゲット裏面方向の陽子とレーザー反射方向のTHz波の同時発生を測定した。また、プリプラズマを抑制することで陽子の高エネルギー化を確認した。

報告書

HTTR第2次燃料体組立,貯蔵作業における燃料取扱い

富本 浩; 加藤 康; 大和田 博之; 佐藤 直; 島崎 洋祐; 小澤 太教; 篠原 正憲; 濱本 真平; 栃尾 大輔; 野尻 直喜; et al.

JAEA-Technology 2009-025, 29 Pages, 2009/06

JAEA-Technology-2009-025.pdf:21.78MB

高温工学試験研究炉(HTTR)は、1989年に初装荷燃料を装荷し、初臨界を達成してから、10年が過ぎ、現在も初装荷燃料にて運転を継続中である。燃料体組立は12種類の濃縮度がある燃料棒4770本を黒鉛ブロックに装荷する。第2次燃料体組立では150体の燃料体を組立てた。燃料棒は設計上、燃料棒の濃縮度誤装荷防止について考慮されているが、さらに確実な取扱いができるように作業上の誤装荷対策をあらかじめ検討した。燃料棒の受入れを2008年6月から開始し、原子炉建家内で組立作業を行い、新燃料貯蔵ラックへの貯蔵を行った。組立,貯蔵作業は、3回の期間に分けて実施し、各々の期間ごとに使用前検査を受検し、2008年9月にすべての作業を完了した。その後、同年11月に使用前検査合格証を受けた。本報告は第2次燃料体の組立,貯蔵作業における燃料取扱いについてまとめたものである。

報告書

HTTRの高温プレナム部温度計装用ナイクロシル・ナイシル熱電対の特性

齋藤 賢司; 清水 厚志; 平戸 洋次; 近藤 誠; 川俣 貴則; 根本 真澄; 茂木 利広

JAEA-Technology 2009-015, 52 Pages, 2009/05

JAEA-Technology-2009-015.pdf:10.17MB

HTTRの高温プレナム部温度計装は、原子炉運転中の炉心状態を監視するため、高温プレナムブロック内にN型熱電対を挿入して、高温プレナムブロックごとに1次冷却材温度を測定している。N型熱電対はHTTR原子炉圧力容器内で使用されるため、約1000$$^{circ}$$Cの高温環境下において長期間安定に動作することが要求される。このため、HTTRの運転・保守データから、これらの熱電対の特性変化を調査した。その結果、N型熱電対はHTTR原子炉圧力容器内で12000時間を越える使用実績があるが、N型熱電対の特性に有意な変化がないことを確認した。本報は、HTTRの高温プレナム部温度計装用熱電対の供用期間中の特性変化について、調査した結果を示す。

論文

Replacement of the criticality accident alarm system in the Tokai reprocessing plant

眞田 幸尚; 根本 誠*; 鈴木 敬*; 川井 啓一*; 百瀬 琢麿

Proceedings of 12th International Congress of the International Radiation Protection Association (IRPA-12) (CD-ROM), 7 Pages, 2008/10

東海再処理施設における臨界警報装置更新に際し、検出器の配置位置を再設計した。設計のための最小臨界事故時の線量評価の結果から、保守的な設計条件を設定した($$gamma$$線検出器; 機器からの距離10m以下、140cm以下のコンクリート遮へい; 中性子検出器; 機器からの距離15m以下、60cm以下のコンクリート及び鉄遮へい)結果的に検出器は7個所設置することとした。本設計を実際の更新工事に反映した。

論文

Observation of spontaneously excited waves in the ion cyclotron frequency range on JT-60U

市村 真*; 檜垣 浩之*; 柿本 真吾*; 山口 裕資*; 根本 健樹*; 片野 誠*; 石川 正男; 森山 伸一; 鈴木 隆博

Nuclear Fusion, 48(3), p.035012_1 - 035012_7, 2008/03

 被引用回数:40 パーセンタイル:83.4(Physics, Fluids & Plasmas)

本論文では、JT-60Uにおけるイオンサイクロトロン周波数帯の自発的励起波動の実験的観測に関して報告する。磁場閉じ込めプラズマ中では、非等方速度分布に起因して不安定性が駆動される。中性粒子入射による高エネルギーDイオンによる励起波動と核融合反応イオン($$^{3}$$He, T)による2つのタイプの揺動が観測されている。これらの揺動は、JET, TFTRで観測されるイオンサイクロトロン放射(ICE)と呼ばれるものと同じものと考えられる。本論文では、初めてこれらの励起波動の空間構造を明らかとした。ICRF加熱用のアンテナを磁気プローブとして用い、ポロイダル方向の空間構造を測定し、観測される波動が揺動磁場成分を持つことが明らかとなった。また、トロイダル方向の空間構造からDイオンに起因する揺動は磁場方向の波数が零付近、核融合反応イオンに起因する揺動は有限な波数を持つことが明らかとなった。さらに核融合反応イオンの$$^{3}$$HeとTに関しても異なる構造が観測され、異なるアルベン波動が不安定になることが示唆された。

論文

Wave excitation in magnetically confined plasmas with an anisotropic velocity distribution

市村 真*; 檜垣 浩之*; 柿本 真吾*; 山口 裕資*; 根本 健樹*; 片野 誠*; 小澤 功*; 室 大志*; 石川 正男; 森山 伸一; et al.

Fusion Science and Technology, 51(2T), p.150 - 153, 2007/02

 被引用回数:1 パーセンタイル:11.35(Nuclear Science & Technology)

磁場によって閉じ込められたプラズマ中では、非熱的エネルギーを持ったイオンの存在により、イオンサイクロトロン周波数帯の揺動が自発的に励起される。GAMMA10においては、磁力線方向と垂直に加熱されたプラズマの温度非等方性に起因するアルベンイオンサイクロトロン(AIC)波動が観測されている。一方、核燃焼プラズマにおいては、局所的なミラー磁場配位に捕捉される高温イオンの存在に起因すると考えられる静電波動の励起やイオンサイクロトロン放射(ICE)が観測されている。これらの不安定揺動を総合的に理解することを目的として実験的観測と波動励起の計算を行った。実験では、JT-60Uに設置されているICRFアンテナをピックアップループとして用い、ICRF領域の揺動の計測とその空間構造の測定を行った。垂直NBIに起因する揺動と核融合反応生成イオンに起因する揺動を観測し、その磁力線方向の波数測定から揺動の分散関係を明らかとした。AIC波動との関連を議論する。

論文

Intense femto-second laser-driven X-ray source coupled with multiple directional quantum beams for applications

大道 博行; 匂坂 明人; 小倉 浩一; 織茂 聡; 西内 満美子; 余語 覚文; 森 道昭; Li, Z.*; 桐山 博光; 金沢 修平; et al.

X-Ray Lasers 2006; Springer Proceedings in Physics, Vol.115, p.595 - 605, 2007/00

現在、関西光科学研究所に設置されている超短パルス高強度レーザーを用いた量子ビーム発生実験を行っている。すなわちレーザーを厚さ数ミクロンの薄膜に照射することにより、プロトン,X線,テラヘルツ波,電子線が発生する。これらは時間同期がきちんととれており、時間幅も1ピコ秒以下であり、するどい指向性を有し輝度も高い。これらを組合せることにより、極めて新しいポンプ-プローブ計測等が可能になると考えられる。これら研究の現状と今後の方向について報告する。

報告書

HTTR後備停止系不具合の調査報告書

濱本 真平; 飯垣 和彦; 清水 厚志; 澤畑 洋明; 近藤 誠; 小山 直; 河野 修一; 小林 正一; 川本 大樹; 鈴木 尚; et al.

JAEA-Technology 2006-030, 58 Pages, 2006/03

JAEA-Technology-2006-030.pdf:10.69MB

日本原子力研究開発機構が所有する高温工学試験研究炉(HTTR)の反応度制御設備は、制御棒系と後備停止系の、動作原理の異なる二つの独立した系統で構成されている。通常運転時、原子炉の反応度を制御するとともに、運転時の異常な過渡変化時及び事故時に安全かつ確実に原子炉を停止させるものである。後備停止系は、万一制御棒系のみで原子炉を停止できない場合に、中性子吸収材である炭化ホウ素ペレットを炉心内に重力落下させ、いかなる運転状態からも原子炉を停止する機能を有するものであり、炭化ホウ素ペレットと、ペレットを収めるホッパ,電動プラグ,後備停止系駆動機構,ガイドチューブ等で構成されている。HTTRでは、平成16年7月26日から平成17年3月4日までの計画で、施設定期検査を実施してきたところ、2月21日の後備停止系の作動試験時に、本装置の16基のうち1基が正常に動作しないことがわかった。調査の結果、後備停止系が正常に動作しなかった原因は、後備停止系を駆動するモータの上部のオイルシールが変形したことによってグリースから分離した油がブレーキに到達し、ブレーキの磨耗した粉と混合することによって粘着物となり、粘着物がブレーキの解除を阻害したことによって、モータの駆動を妨げたことがわかった。

報告書

耐熱セラミックス複合材料の照射試験,2; 第2次(98M-41A),第3次(99M-30A)予備照射試験中間報告

馬場 信一; 根本 誠*; 相沢 静男; 山地 雅俊*; 石原 正博; 沢 和弘

JAERI-Tech 2005-055, 157 Pages, 2005/09

JAERI-Tech-2005-055.pdf:19.06MB

高温工学試験研究炉(HTTR)を用いた高温工学に関する先端的基礎研究の課題の1つとして「耐熱セラミックス複合材料の照射損傷効果に関する研究」のため、材料試験炉を用いて一連の予備照射試験を進めている。本報告は、このうちの第2次及び第3次の照射試験について記載したものである。両試験の照射温度は973K-1173K及び1273K-1473K,高速中性子照射量1$$times$$10$$^{25}$$m$$^{-2}$$( E$$>$$1MeV)の照射条件のもとで行った試料について、直径寸法の基本統計値,寸法変化及び熱膨張率の結果について報告する。

論文

Neutron spectra and angular distributions of concrete-moderated neutron calibration fields at JAERI

吉澤 道夫; 谷村 嘉彦; 三枝 純; 根本 久*; 吉田 真

Radiation Protection Dosimetry, 110(1-4), p.81 - 84, 2004/09

 被引用回数:3 パーセンタイル:23.57(Environmental Sciences)

原研・放射線標準施設棟(FRS)にはコンクリート減速中性子校正場が整備されている。この場は、コンクリート壁及びブロックで囲まれた狭い空間の中にAm-Be線源を置き、散乱中性子により種々のスペクトルを作り出す場である。この場の中性子スペクトルをボナー球(BMS),球形反跳陽子比例計数管(RPC)及び液体シンチレーションカウンタ(NE-213)により測定した。BMSの結果とRPC及びNE-213による結果はよく一致した。そこで、BMSの結果から基準線量当量率を求めた。また、基準個人線量当量率を求めるために、中性子フルエンスの入射角度分布をMCNPモンテカルロコードを用いて評価した。その結果、散乱中性子はさまざまな角度で入射しており、これを考慮すると、基準個人線量当量率は、角度分布を考慮しない場合に比べて10-18%小さくなることがわかった。

論文

Fast particle experiments in JT-60U

Kramer, G. J.; 岩瀬 誠; 草間 義紀; 森岡 篤彦; 根本 正博; 西谷 健夫; 篠原 孝司; 竹治 智; 飛田 健次; 小関 隆久; et al.

Nuclear Fusion, 40(7), p.1383 - 1396, 2000/07

 被引用回数:46 パーセンタイル:77.8(Physics, Fluids & Plasmas)

JT-60UにおいてICRF加熱または、N-NBI加熱を用いて高速イオンの実験を行ってきた。両方の加熱手法でアルフヴェン固有(AE)モードの励起を観測した。ICRF加熱中のAEモードの解析から以下のことがわかった。(1)鋸歯状振動中にICRF加熱によって励起されたAEモードの情報からプラズマ中心領域の安全係数分布を評価をすることができた。これらの結果はMSE計測結果及び、鋸歯状振動の理論計算モデルと良く一致し、この解析手法の正当性を示した。(2)X-モード反射計を用いてTAEモードの径方向のモード構造がJT-60Uで初めて評価し、これらのモードがNOVA-Kコードで予測されたバルーニング構造を持つことを明らかにした。また、N-NBI加熱実験から以下の結果を得た。(1)N-NBI加熱によって鋸歯状振動周期が長期化できることがわかった。(2)N-NBI入射中にアルフヴェン周波数領域のモードを解析した結果、通常のTAEモード以外にバースト的な振る舞いをするモード、周波数捜引するモードが存在することを明らかにした。

論文

Characteristics of Alfv$'e$n eigenmodes, burst modes and chirping modes in the Alfv$'e$n frequency range driven by negative ion based neutral beam injection in JT-60U

草間 義紀; Kramer, G. J.; 木村 晴行; 三枝 幹雄*; 小関 隆久; 飛田 健次; 及川 聡洋; 篠原 孝司; 近藤 貴; 森山 伸一; et al.

Nuclear Fusion, 39(11Y), p.1837 - 1843, 1999/11

 被引用回数:66 パーセンタイル:87.09(Physics, Fluids & Plasmas)

JT-60Uにおいて、負イオン源ビーム(NNB)を用いて、ビームイオンが励起する不安定性の研究を行った。磁気シアが弱い場合には、ビームイオンの体積平均$$beta$$値が0.1%と低い領域においてもアルヴェン固有モードが励起されることが明らかとなった。しかし、このモードは強い負磁気シアを持つプラズマでは安定化できることがわかった。ビームイオン$$beta$$値が0.2%程度に上昇し、かつプラズマ中心の安全係数が1.4程度まで低下すると、アルヴェン周波数領域にバースト的に発生をくり返すモードが出現する。このモードにより、わずかではあるがビームイオンが損失することが明らかになった。

28 件中 1件目~20件目を表示