検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 45 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Development of transient behavior analysis code for metal fuel fast reactor during initiating phase of core disruptive accident

太田 宏一*; 尾形 孝成*; 山野 秀将; 二神 敏; 島田 貞衣*; 山田 由美*

Proceedings of 30th International Conference on Nuclear Engineering (ICONE30) (Internet), 8 Pages, 2023/05

The experimental analyses of the U-Pu-Zr fuel pin behavior during transient overpower (TOP) tests were performed by CANIS, and the residual cladding wall thickness and molten region of the fuel alloy after the tests, and the reactivity inserted by molten fuel extrusion before the fuel pin failure were compared with the experimental results. On the basis of these analysis results, detailed calculation models were developed for and implemented into CANIS to be made it possible to consider changes in the local properties of the fuel alloys due to redistribution of fuel constituents during steady-state irradiation and in the cladding thinning rate depending on the fuel-cladding interface temperature. The modified CANIS properly predicted fuel behavior and resulting reactivity changes before fuel pin failure in TOP events.

論文

溶融塩の密度・粘度測定

佐藤 理花*; 西 剛史*; 太田 弘道*; 林 博和; 菅原 隆徳; 西原 健司

第43回日本熱物性シンポジウム講演論文集(CD-ROM), 3 Pages, 2022/10

溶融塩の密度および粘度は溶融塩を用いた加速器駆動核変換システム等を検討する上で必要不可欠な物性値である。本研究では、溶融塩を用いた物性値測定の手始めとして塩化鉛および硝酸カリウムを対象とし、粘度を測定するための装置の整備を行い、粘度および密度を測定した。

論文

A Design study on a metal fuel fast reactor core for high efficiency minor actinide transmutation by loading silicon carbide composite material

大釜 和也; 原 俊治*; 太田 宏一*; 永沼 正行; 大木 繁夫; 飯塚 政利*

Journal of Nuclear Science and Technology, 59(6), p.735 - 747, 2022/06

 被引用回数:1 パーセンタイル:31.61(Nuclear Science & Technology)

A metal fuel fast reactor core for high efficiency minor actinide (MA) transmutation was designed by loading silicon carbide composite material (SiC/SiC) which can improve sodium cooled fast reactor (SFR) core safety characteristics such as sodium void reactivity worth and Doppler coefficient due to neutron moderation. Based on a 750 MWe metal fueled SFR core concept designed in a prior work, the reactor core loading fuel subassemblies with SiC/SiC wrapper tubes and moderator subassemblies was designed. To improve the reactor core safety characteristics efficiently, three layers of SiC/SiC moderator subassemblies were loaded in the core by replacing 108 out of 393 fuel subassemblies with the moderators. The reactor core with approximately 20 wt% MA-containing metal fuel satisfied all safety design criteria and achieved the MA transmutation amount as high as 420 kg/GWe-y which is twice as high as that of the axially heterogeneous core with inner blanket and upper sodium plenum, and two-thirds of that of the accelerator-driven system.

論文

Thermally altered subsurface material of asteroid (162173) Ryugu

北里 宏平*; Milliken, R. E.*; 岩田 隆浩*; 安部 正真*; 大竹 真紀子*; 松浦 周二*; 高木 靖彦*; 中村 智樹*; 廣井 孝弘*; 松岡 萌*; et al.

Nature Astronomy (Internet), 5(3), p.246 - 250, 2021/03

 被引用回数:43 パーセンタイル:96.93(Astronomy & Astrophysics)

2019年4月「はやぶさ2」ミッションは、地球に近い炭素質の小惑星(162173)リュウグウの人工衝撃実験を成功させた。これは露出した地下物質を調査し、放射加熱の潜在的な影響をテストする機会を提供した。はやぶさ2の近赤外線分光器(NIRS3)によるリュウグウの地下物質の観測結果を報告する。発掘された材料の反射スペクトルは、表面で観測されたものと比較して、わずかに強くピークがシフトした水酸基(OH)の吸収を示す。これは、宇宙風化や放射加熱が最上部の表面で微妙なスペクトル変化を引き起こしたことを示している。ただし、このOH吸収の強度と形状は、表面と同様に、地下物質が300$$^{circ}$$Cを超える加熱を経験したことを示している。一方、熱物理モデリングでは、軌道長半径が0.344AUに減少しても、推定される掘削深度1mでは放射加熱によって温度が200$$^{circ}$$Cを超えて上昇しないことが示されている。これは、リュウグウ母天体が放射加熱と衝撃加熱のいずれか、もしくは両方により熱変化が発生したという仮説を裏付けている。

論文

Study on eutectic melting behavior of control rod materials in core disruptive accidents of sodium-cooled fast reactors, 1; Project overview

山野 秀将; 高井 俊秀; 古川 智弘; 菊地 晋; 江村 優軌; 神山 健司; 福山 博之*; 東 英生*; 西 剛史*; 太田 弘道*; et al.

Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.418 - 427, 2019/09

制御棒材の炭化ホウ素(B$$_{4}$$C)とステンレス鋼(SS)の共晶溶融反応及び移動挙動は、ナトリウム冷却高速炉の炉心損傷事故(CDA)評価における重要な課題の一つである。CDAの数値解析では、このような挙動のシミュレーションはこれまで行われたことがないため、物理モデルを開発しそれをCDA解析コードに組み入れる必要がある。本研究では、B$$_{4}$$C-SS共晶溶融実験、共晶溶融の熱物性計測、共晶溶融反応の物理モデル開発に焦点を当てている。共晶実験では、可視化実験,反応速度実験,材料分析を行う。物性は液相から固相までの範囲で測定する。これらの反応速度や物性を基に、シビアアクシデント解析コードのための物理モデルを開発する。本発表はプロジェクト全体概要及び平成29年度までの進捗概要について報告する。この論文における具体的成果は、共晶溶融実験において固化したB$$_{4}$$C-SS共晶試料のホウ素濃度分布で、これはコンピュータコードに組み込まれた共晶物理特性の検証に用いられる。

論文

Verification of detailed core-bowing analysis code ARKAS_cellule with IAEA benchmark problems

太田 宏一*; 大釜 和也; 山野 秀将

Proceedings of International Nuclear Fuel Cycle Conference / Light Water Reactor Fuel Performance Conference (Global/Top Fuel 2019) (USB Flash Drive), p.30 - 39, 2019/09

A detailed core-bowing analysis code, ARKAS_cellule, has been developed. The detailed shell model applied to ARKAS_cellule was verified with a conventional beam model for the IAEA benchmark problems. As a result, ARKAS_cellule was properly verified for the thermal bowing analysis of the core. In addition, it was confirmed that ARKAS_cellule simulates the change in duct stiffness with the contact conditions.

論文

A Design study on a mixed oxide fuel sodium-cooled fast reactor core partially loading highly concentrated MA-containing metal fuel

大釜 和也; 太田 宏一*; 大木 繁夫; 飯塚 政利*

Proceedings of 2019 International Congress on Advances in Nuclear Power Plants (ICAPP 2019) (Internet), 9 Pages, 2019/05

A neutronics design study for a mixed oxide (MOX) fuel Sodium-cooled Fast Reactor (SFR) core partially loading highly concentrated Minor Actinide (MA) containing fuel was conducted. To analyze preferable loading positions of highly concentrated MA-containing metal fuel, the characteristics of heterogeneous MA loading cores were evaluated assuming the amount of MA loaded to heterogeneous cores were same as that of a reference homogeneous 3% MAcontaining MOX fuel core. The cores loading MA-containing metal fuel could meet the design limitation of the sodium void reactivity of the SFR except for the one loading MA-containing metal fuel in the core center region. Based on these results, the core design was modified to maximize amount of MA transmutation. The modified core loading 60 subassemblies of 16% MA-containing metal fuel in the outermost region could attain the largest amount of MA transmutation, which was larger by about 60% than that of the reference homogeneous MOX fuel core.

論文

Design study of a 750 MWe Japan sodium-cooled fast reactor with metal fuel

大釜 和也; 太田 宏一*; 生澤 佳久; 大木 繁夫; 尾形 孝成*

Proceedings of 2017 International Congress on Advances in Nuclear Power Plants (ICAPP 2017) (CD-ROM), 6 Pages, 2017/04

Under the collaborative research of Central Research Institute of Electric Power Industry (CRIEPI) and Japan Atomic Energy Agency (JAEA), the metal fuel core concept has been studied. In this study, a 750 MWe sodium-cooled fast reactor (SFR) with metal fuel designed in a past/precedent study was reevaluated considering the irradiation behaviors of metal fuel such as axial elongation and bond-sodium redistribution, which have significant impacts on the core characteristics such as the multiplication factor and sodium void reactivity worth. The result of reanalysis indicated that the sodium void reactivity worth of the core became higher than that evaluated in the past study, so the redesign of the core was performed to improve the sodium void reactivity worth. To redesign the core, correlations of the sodium void reactivity worth and the dimension of the core and fuel subassemblies was investigated by survey calculations. Based on the results, specifications of the redesigned core were selected. The characteristics of the redesign core were evaluated. To verify the deterministic calculation results, the core characteristics of the redesign core were compared with those by a contentious-energy Monte Carlo simulation with precise geometry modeling, which can provide reference solutions. The both calculations agreed well, and the improvements of core characteristics of the redesign core were verified.

報告書

幌延深地層研究計画における坑道掘削(地下施設建設)時の調査研究段階(第2段階:深度350mまで)研究成果報告書

佐藤 稔紀; 笹本 広; 石井 英一; 松岡 稔幸; 早野 明; 宮川 和也; 藤田 朝雄*; 棚井 憲治; 中山 雅; 武田 匡樹; et al.

JAEA-Research 2016-025, 313 Pages, 2017/03

JAEA-Research-2016-025.pdf:45.1MB

幌延深地層研究計画は、高レベル放射性廃棄物の地層処分技術に関わる研究開発の一環として、日本原子力研究開発機構が北海道幌延町で進めているプロジェクトである。本報告書は、深度350mの研究坑道掘削終了までの期間(2005年4月から2014年6月)に行われた第2段階における調査研究の成果を取りまとめたものである。第2段階における深地層の科学的研究では、「地質環境調査技術開発」、「深地層における工学的技術の基礎の開発」、「地質環境の長期安定性に関する研究」を、地層処分研究開発では、「処分技術の信頼性向上」、「安全手法の高度化」を実施し、これらに加えて「地下施設の建設」、「環境モニタリング」を実施し、当初の目標どおりの成果を得た。「地質環境調査技術開発」では、坑道掘削中の地質環境の変化を把握するとともに、第1段階で予測した結果の妥当性を確認した。「深地層における工学的技術の基礎の開発」においては、地下施設の建設に適用した工学的技術の有効性を確認した。「地質環境の長期安定性に関する研究」ならびに地層処分研究開発の「処分技術の信頼性向上」と「安全手法の高度化」では、この期間の研究成果をまとめた。「地下施設の建設」では坑道掘削の実績を整理した。「環境モニタリング」では、環境調査などを継続し、地上及び地下施設の建設に伴う影響の低減を図る措置が適切であることを確認した。

論文

Development of accident tolerant control rod for light water reactors

太田 宏一*; 中村 勤也*; 尾形 孝成*; 永瀬 文久

Proceedings of Annual Topical Meeting on LWR Fuels with Enhanced Safety and Performance (TopFuel 2016) (USB Flash Drive), p.159 - 168, 2016/09

軽水炉のシビアアクシデントにおいては、大規模な燃料破損に先行して制御棒の破損が生じ中性子吸収材が炉心領域から離脱して、制御不能な再臨界となる危険性がある。本研究では、(1)十分に高い融点および共晶反応温度を有する、(2)溶融、再固化燃料物質の高い混和性を有する、(3)十分な制御棒価値を有する事故耐性の高い制御棒(ATCR)の概念を検討している。今回、希土類酸化物が制御棒構造材の融点以上の高温まで鉄と高い共存性があること、Sm$$_{2}$$O$$_{3}$$やEu$$_{2}$$O$$_{3}$$、Gd$$_{2}$$O$$_{3}$$、Dy$$_{2}$$O$$_{3}$$及びそれらとHfO$$_{2}$$との混合物の利用により、現行のAg-In-Cd制御材と同等以上の制御棒価値が得られることを明らかにした。

論文

Dipole tracer migration and diffusion tests in fractured sedimentary rock at Horonobe URL

田中 真悟*; 横田 秀晴; 大野 宏和; 中山 雅; 藤田 朝雄; 瀧谷 啓晃*; 渡辺 直子*; 小崎 完*

Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 6 Pages, 2015/05

In-situ dipole tracer migration tests were conducted at the G.L.-250 m gallery of the Horonobe URL. Laboratory experiments were also conducted to determine the apparent diffusivity (${{it D$_{a}$}}$) and sorption coefficients (${{it K$_{d}$}}$) of cesium and water (HTO) in the rock taken at the gallery to evaluate the performance of Wakkanai formation as natural barrier. The breakthrough curves of non-sorbing tracer (Uranine) obtained at the in-situ dipole tracer migration tests were well described by a dual-channel model in which one-dimensional advection dispersion was taken in account. This suggests that the tracers migrate through at least two different pathways in the fracture. The breakthrough curves also indicated that the peak concentration of the sorbing tracer (cesium) was much smaller than that of the non-sorbing tracer (Uranine), suggesting that the Wakkanai Formation has a high sorptive and low diffusive properties for cesium. The ${{it D$_{a}$}}$ value obtained for cesium was about 3E-12 m$$^{2}$$/s, which is significantly smaller than that of water (3E-10 m$$^{2}$$/s), and the ${{it K$_{d}$}}$ value of cesium was determined to be about 5E-2 ml/g.

報告書

金属燃料高速炉の炉心・燃料設計に関する研究(4),(5)及び(6); 2009-2012年度共同研究報告書

植松 眞理 マリアンヌ; 杉野 和輝; 川島 克之; 岡野 靖; 山路 哲史; 永沼 正行; 大木 繁夫; 大久保 努; 太田 宏一*; 尾形 孝成*; et al.

JAEA-Research 2012-041, 126 Pages, 2013/02

JAEA-Research-2012-041.pdf:16.49MB

ナトリウム冷却金属燃料炉心はMOX燃料炉心に比べ重金属密度が高く中性子経済が良好である。こうした特徴を活かし、燃料仕様やナトリウムボイド反応度及びバンドル部圧力損失などの炉心設計条件を柔軟に持たせることで、高燃焼度化、増殖比の向上、燃料インベントリの低減などを目指した炉心設計が可能である。また、米国では実炉の装荷燃料として使用してきた経験が豊富であり、その実用性が実証されてきていることから、高速増殖炉サイクル実用化研究開発(FaCT)のなかで、MOX燃料炉心に続く副概念として概念検討が実施されている。一方、金属燃料サイクルの実用化に向けては、金属燃料の高温・高燃焼度条件における照射試験やマイナーアクチニド・希土類含有燃料の物性などのデータ拡充や、金属燃料炉心特有の安全特性の確認、過渡時解析手法の信頼性向上などの課題が残されている。本報では平成21年度から平成24年度に実施した日本原子力研究開発機構と電力中央研究所による共同研究「金属燃料高速炉の炉心・燃料設計に関する研究」の結果について報告する。

論文

Tilted-foil technique for producing a spin-polarized radioactive isotope beam

平山 賀一*; 三原 基嗣*; 渡辺 裕*; Jeong, S. C.*; 宮武 宇也*; 百田 佐多夫*; 橋本 尚志*; 今井 伸明*; 松多 健策*; 石山 博恒*; et al.

European Physical Journal A, 48(5), p.54_1 - 54_10, 2012/05

 被引用回数:2 パーセンタイル:16.82(Physics, Nuclear)

The tilted-foil method for producing spin-polarized radioactive isotope beams has been studied for the application to nuclear physics and materials science, using the radioactive nucleus $$^8$$Li produced at the Tokai Radioactive Ion Accelerator Complex (TRIAC). We successfully produced polarization in a $$^8$$Li beam using 15 thin polystyrene foils fabricated especially for this purpose. A systematic study of the nuclear polarization as a function of the number of foils, beam energy, tilt angles and foil material has been performed, confirming the features of the tilted-foil technique experimentally. The contributions made to the nuclear polarization of $$^8$$Li nuclei by the atomic states was investigated.

論文

Actinide-handling experience for training and education of future expert under J-ACTINET

逢坂 正彦; 小無 健司*; 林 博和; Li, D.*; 本間 佳哉*; 山村 朝雄*; 佐藤 勇; 三輪 周平; 関本 俊*; 窪田 卓見*; et al.

Proceedings of International Conference on Toward and Over the Fukushima Daiichi Accident (GLOBAL 2011) (CD-ROM), 5 Pages, 2011/12

将来アクチノイド研究・技術に従事することが期待される若手に向けたJ-ACTINET主催のサマースクールが成功裏に開催された。第1回のサマースクールは2009年8月茨城地区で開催され、2010年8月関西地区での開催が続いた。アクチノイド研究の入門コースとして、大学・大学院学生並びに若手研究者・エンジニアを対象として、実際のアクチノイド体験を主眼とした。3$$sim$$4日の短期間のスクールでアクチノイドの体験を行い、アクチノイドへの興味を引き出すために多くの努力が払われた。茨城地区でのサマースクールにおいてはアクチノイド取扱いの模擬体験が、また、関西地区でのサマースクールにおいては実際のアクチノイドを用いた実験が好評を博した。今後J-ACTINETサマースクールを毎年開催していく予定である。

論文

Relationship between hypocentral distribution and geological structure in the Horonobe area, northern Hokkaido, Japan

常盤 哲也; 浅森 浩一; 平賀 正人*; 山田 治; 森谷 祐一*; 堀田 光*; 北村 至*; 横田 秀晴

Proceedings of 13th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM 2010) (CD-ROM), p.117 - 122, 2010/10

地質環境の長期安定性を考えるうえで、地震・断層活動の特性を理解することが重要である。幌延地域は、北海道北部において地殻変動が活発な地域の一つと考えられている。そこで本研究では、北海道北部幌延地域における震源分布と地質構造の関係について検討を行った。震源分布の推定にあたっては、マルチプレット・クラスタリング解析手法を用いた。地震データは、2003年9月1日から2007年9月30日に観測された421イベントのデータを用いた。一方、地質構造は、反射法地震探査結果を用いたバランス断面図をもとに、三次元地質構造モデルを構築した。両者を比較した結果、深度の違いはあるが、震源は西から東に向かって深くなっていく分布や北北西-南南東方向に分布する傾向は、断層などの地質構造の形態の傾向と似通っていることがわかった。このことから、震源分布と地質構造とは相関関係があり、両者を比較することで、活動域の特定に関して有益な情報を得ることができると考えられる。

論文

J-PARC DTL・SDTL空洞トラブル報告

伊藤 崇; 浅野 博之; 田中 宏和*; 久保田 親*; 南茂 今朝雄*; 内藤 富士雄*

Proceedings of 6th Annual Meeting of Particle Accelerator Society of Japan (CD-ROM), p.690 - 692, 2010/03

J-PARCリニアック部を構成しているDTL及びSDTLは、加速器トンネル内へのインストール後2006年10月から運転を開始し、2009年6月まで3年弱運転を行ってきた。現在DTL及びSDTLはほぼ安定に稼働しビーム加速を行っているが、これまでトラブルが皆無だったわけではない。メンテナンス期間中に判明し対策を行ったトラブルもあるが、ビーム加速中に発生したトラブルもある。後者の場合ビーム加速を停止してしまうため、ユーザーへのビーム供給時間を奪い多大な迷惑をかけることになる。本稿では、これまでに起こったトラブルの中からおもにDTL・SDTL空洞本体、及びその付属機器に起因して発生したトラブルについて報告する。

論文

Momentum-resolved charge excitations in high-$$T$$$$_{rm c}$$ cuprates studied by resonant inelastic X-ray scattering

石井 賢司; Hoesch, M.*; 稲見 俊哉; 葛下 かおり*; 大和田 謙二; 坪田 雅己; 村上 洋一; 水木 純一郎; 遠藤 康夫; 筒井 健二*; et al.

Journal of Physics and Chemistry of Solids, 69(12), p.3118 - 3124, 2008/12

 被引用回数:3 パーセンタイル:18.13(Chemistry, Multidisciplinary)

Resonant inelastic X-ray scattering (RIXS) in the hard X-ray regime is a new spectroscopic technique to measure electronic excitations utilizing brilliant synchrotron radiation. It has the great advantage that the momentum dependence can be measured unlike conventional optical methods. As inelastic neutron scattering gives spin or lattice dynamics, inelastic X-ray scattering can be a tool to measure charge dynamics in solids through the coupling of photon to the charge of the electron. Here, I would like to present our RIXS studies on high-$$T_c$$ cuprates and related materials which were performed in close collaboration with theorists. In doped Mott insulators, an interband excitation across the Mott gap and an intraband excitation below the gap are observed in the low energy region of RIXS spectra. Momentum and carrier-doping dependence of the excitations will be discussed.

論文

J-PARCリニアックにおけるアライメント

森下 卓俊; 青 寛幸; 伊藤 崇; 上野 彰; 長谷川 和男; 池上 雅紀*; 久保田 親*; 高崎 栄一*; 田中 宏和*; 内藤 富士雄*; et al.

Proceedings of 2nd Annual Meeting of Particle Accelerator Society of Japan and 30th Linear Accelerator Meeting in Japan, p.266 - 268, 2005/07

J-PARC線形加速器において、加速器要素機器の正確なアライメントは高品質のビーム加速にとって不可欠である。インストール時の基準となる墨出しは、機器の搬入に先立ってすべてのフロアーで完了している。本発表では墨出しの結果とインストール時におけるアライメントターゲットの設置精度の評価とアライメント手順、及び建物の長期変動をモニターするセンサーとそのメンテナンス装置の開発状況について報告する。

論文

An Alignment of J-PARC linac

森下 卓俊; 青 寛幸; 伊藤 崇; 上野 彰; 長谷川 和男; 池上 雅紀*; 久保田 親*; 内藤 富士雄*; 高崎 栄一*; 田中 宏和*; et al.

Proceedings of 2005 Particle Accelerator Conference (PAC '05) (CD-ROM), p.2851 - 2853, 2005/00

J-PARC線形加速器において、加速器要素機器の正確なアライメントは高品質のビーム加速にとって不可欠である。インストール時の基準となる墨出しは、機器の搬入に先立ってすべてのフロアーで完了している。本発表では墨出しの結果とインストール時におけるアライメント手順、及び建物の長期変動をモニターするセンサーとそのメンテナンス装置の開発状況について報告する。

論文

J-PARCリニアックにおけるアラインメント

森下 卓俊; 青 寛幸; 伊藤 崇; 上野 彰; 長谷川 和男; 池上 雅紀*; 久保田 親*; 高崎 栄一*; 田中 宏和*; 内藤 富士雄*; et al.

Proceedings of 1st Annual Meeting of Particle Accelerator Society of Japan and 29th Linear Accelerator Meeting in Japan, p.671 - 673, 2004/08

J-PARCリニアックでは、イオン源からRCS入射点までの400m以上に渡り、高い精度でビーム軌道上に機器を配置する必要がある。本件では、J-PARCリニアックにおける機器アライメントの概要とともに、現在開発中の長期に渡る床変動を監視するための連通管を用いた計測システム,ワイヤーからの距離を感知するセンサーを用いたアライメントシステムについて報告する。

45 件中 1件目~20件目を表示