Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Novello, L.*; Gaio, E.*; Piovan, R.*; 武智 学; 井手 俊介; 松川 誠
Fusion Engineering and Design, 86(1), p.33 - 40, 2011/01
被引用回数:10 パーセンタイル:61.04(Nuclear Science & Technology)The identification of the maximum amplitude of the currents circulating in the circuits is a useful indication for the design both of magnet and power supply components in fusion experiments. This paper evaluates the maximum level of coil overcurrents in the poloidal superconducting magnets of JT-60SA. To derive these information, a complete model capable to take into account all the mutually coupled elements was worked out, including the poloidal superconducting coils, the plasma position control in-vessel coils, the vacuum vessel, the stabilizing plates and the plasma. The model was utilized to analyze plasma disruption and quench protection circuit intervention in a large variety of different conditions to identify the possible overcurrent levels. The paper describes the model and the analyses performed, and presents and discusses the results.
Gaio, E.*; Novello, L.*; Piovan, R.*; 島田 勝弘; 寺門 恒久; 栗原 研一; 松川 誠
Fusion Engineering and Design, 84(2-6), p.804 - 809, 2009/06
被引用回数:19 パーセンタイル:76.39(Nuclear Science & Technology)コイルクエンチ時に超電導コイルの蓄積エネルギーを高速に取り除かなければならないJT-60SAのクエンチ保護回路の概念設計について発表を行う。クエンチ保護回路の主要部は、高速にコイル消磁を行うためにコイル電流を抵抗に転流させる直流電流スイッチで構成される。本発表では、機械スイッチと半導体スイッチの一つであるIGCT(Integrated Gate Commutated Thyristor)の並列接続で構成されたハイブリッド型電流スイッチを提案し、検討した結果について述べる。また、クエンチ保護回路の主要部のほかに、電流スイッチで電流遮断失敗した場合のバックアップ回路として直列にパイロブレーカーを接続する。提案するハイブリッド型クエンチ保護回路は、半導体スイッチの特徴である高速遮断性能とメンテナンスフリーの利点と機械スイッチの特徴である低損失の利点の両方を併せ持つ回路構成となる。
松川 誠; 菊池 満; 藤井 常幸; 藤田 隆明; 林 孝夫; 東島 智; 細金 延幸; 池田 佳隆; 井手 俊介; 石田 真一; et al.
Fusion Engineering and Design, 83(7-9), p.795 - 803, 2008/12
被引用回数:17 パーセンタイル:72.99(Nuclear Science & Technology)JT-60SAは、日欧の幅広いアプローチの下で建設する完全超伝導トカマク装置で、ITERや原型炉への貢献を目指している。2007年の両極の国会批准後、実質的には既に建設段階に移行している。JT-60SAは、既存の建屋,電源,プラズマ加熱装置,計測装置などの、JT-60U設備の最大限の有効利用が前提であり、完全に新作する主たる機器は本体装置のみである。最大プラズマは電流5.5MAで、プラズマ主半径3.06m,アスペクト比2.65,非円形度1.76,三確度0.36である。最大プラズマ加熱入力41MW,プラズマ電流のフラットトップ時間は100秒間である。本論文では、トカマク装置本体だけでなく、プラズマ加熱装置や遠隔保守装置の設計などについても言及するとともに、EUとの技術的な議論を踏まえて行った超伝導導体に関する最近の設計変更案などを紹介し、装置の全体像を明らかにする。