Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
日下 翔太郎*; 佐々木 泰祐*; 角田 一樹; 一ノ倉 聖*; 出田 真一郎*; 田中 清尚*; 宝野 和博*; 平原 徹*
Applied Physics Letters, 120(17), p.173102_1 - 173102_5, 2022/04
被引用回数:2 パーセンタイル:34.67(Physics, Applied)We fabricated superlattice films composed of Bi bilayers (BLs) and BiTe quintuple layers (QLs) by annealing pure BiTe films. It was found that Te desorbs from the QL to form the BL with an activation energy of 2.7 eV. Eventually two distinct stoichiometric phases were formed, BiTe (QL-BL-QL) and BiTe (QL-BL), as evidenced by scanning transmission emission microscopy measurements. The surface-state dispersion was measured with angle-resolved photoemission spectroscopy and the topological nature of each sample is discussed. Our method offers a convenient and simple way to fabricate superlattice films with different topological properties.
平原 徹*; Otrokov, M. M.*; 佐々木 泰祐*; 角田 一樹*; 友弘 雄太*; 日下 翔太郎*; 奥山 裕磨*; 一ノ倉 聖*; 小林 正起*; 竹田 幸治; et al.
Nature Communications (Internet), 11, p.4821_1 - 4821_8, 2020/09
被引用回数:41 パーセンタイル:93.11(Multidisciplinary Sciences)We fabricate a novel magnetic topological heterostructure MnBiTe/BiTe where multiple magnetic layers are inserted into the topmost quintuple layer of the original topological insulator BiTe. A massive Dirac cone (DC) with a gap of 40-75 meV at 16 K is observed. By tracing the temperature evolution, this gap is shown to gradually decrease with increasing temperature and a blunt transition from a massive to a massless DC occurs around 200-250 K. Magnetic measurements show that there are two distinct Mn components in the system that corresponds to the two heterostructures; MnBiTe/BiTe is paramagnetic at 6 K while MnBiTe/BiTe is ferromagnetic with a negative hysteresis (critical temperature 20 K). This novel heterostructure is potentially important for future device applications.
坂中 章悟*; 吾郷 智紀*; 榎本 収志*; 福田 茂樹*; 古川 和朗*; 古屋 貴章*; 芳賀 開一*; 原田 健太郎*; 平松 成範*; 本田 融*; et al.
Proceedings of 11th European Particle Accelerator Conference (EPAC '08) (CD-ROM), p.205 - 207, 2008/06
コヒーレントX線,フェムト秒X線の発生が可能な次世代放射光源としてエネルギー回収型リニアック(ERL)が提案されており、その実現に向けた要素技術の研究開発が日本国内の複数研究機関の協力のもと進められている。本稿では、ERL放射光源の研究開発の現状を報告する。
酒井 宏典; 比嘉 野乃花; 服部 泰佑; 徳永 陽; 芳賀 芳範; 神戸 振作; 後藤 貴行*; 平田 倫啓*; 淡路 智*; 佐々木 孝彦*
no journal, ,
強相関電子系のウラン化合物URuSiの単結晶を用いて、軸方向に外部磁場を約24Tをかけて、Si核磁気共鳴(NMR)観測を行った。常磁性状態におけるNMRシフトの温度依存性は、外部磁場依存することがわかった。この磁場依存性は、パルス磁場で測定された帯磁率の磁場依存性に似ている。
阿部 陽介; 佐々木 泰祐*; 山下 真一郎; 大久保 成彰; 鵜飼 重治
no journal, ,
軽水炉の事故耐性燃料被覆管として開発中であるFe-Cr-Al合金は、比較的低温照射で生じ得るCrリッチ脆化相(相)の析出挙動を正確に予測することが課題となっている。しかし、照射炉の世界的制約により中性子照射下での相の形成挙動は十分に理解されていない。そこで本研究では、14種類の合金に対する3水準での損傷速度による系統的照射実験と重回帰分析を組み合わせることにより、相形成に及ぼす影響因子(Cr濃度・Al濃度・損傷速度)を定量評価するとともに、実機合金設計において重要なCr濃度とAl濃度に基づく/(+)相境界曲線の高精度化に寄与した。
阿部 陽介; 佐々木 泰佑*; 大久保 成彰; 山下 真一郎; 鵜飼 重治
no journal, ,
軽水炉の事故耐性燃料被覆管として開発中であるFe-Cr-Al(ODS)合金においては、比較的低い照射温度で生じるCrリッチ脆化相(相)の析出挙動と機械特性への影響を理解し予測することが課題となっている。そこで本研究では、照射影響評価の前段階として、CrとAlの組成を系統的に変化させたFe-Cr-Al合金を用いた熱時効実験と機械学習モデルを組み合わせることにより、温度や時効時間などの異なる条件での合金状態図上での相境界を合理的に定義した。また、3DAPデータベースに回帰モデルを適用し、推定されたビッカース硬さの増加量と相による硬化メカニズムとの関係を評価した結果、相による硬化は粒子切断機構で説明できることが示唆された。