検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 59 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

報告書

軟X線領域のXAFS測定によるホウケイ酸ガラスの構造評価,3(共同研究)

永井 崇之; 岡本 芳浩; 山岸 弘奈*; 柴田 大輔*; 小島 一男*; 長谷川 毅彦*; 佐藤 誠一*; 深谷 茜音*; 畠山 清司*

JAEA-Research 2023-004, 45 Pages, 2023/09

JAEA-Research-2023-004.pdf:6.07MB

ホウケイ酸ガラス中のガラス成分や廃棄物成分の局所構造は、その化学組成によって変化する。本研究は、ガラス固化体を模擬したガラス(以下、模擬廃棄物ガラス)を対象に軟X線領域のXAFS測定を実施し、原料ガラス成分のホウ素(B)やケイ素(Si)、廃棄物成分の鉄(Fe)やセシウム(Cs)の化学的状態等を評価した。模擬廃棄物ガラスの化学的安定性を把握するため、浸出試験に供したガラス表面を対象に、BのK吸収端、FeのL$$_{3}$$、L$$_{2}$$吸収端及びCsのM$$_{5}$$、M$$_{4}$$吸収端のXANESスペクトル測定を行った。その結果、浸出液に曝露されたガラス表面は変化し、明瞭なXANESスペクトルが得にくくなることが分かった。BのK吸収端XANESスペクトルから、浸出試験後の試料表面は未浸漬の試料表面と比較してB-Oの3配位構造(BO$$_{3}$$)が増加し、4配位構造(BO$$_{4}$$)が減少する傾向を確認した。FeのL$$_{3}$$、L$$_{2}$$吸収端及びCsのM$$_{5}$$、M$$_{4}$$吸収端のXANESスペクトルから、浸漬時間が長くなるに従って、ガラス表面に存在するCsが浸出液中へ溶出することを確認した。未浸漬の模擬廃棄物ガラスを対象に、SiのK吸収端XANESスペクトルを測定した結果、Na$$_{2}$$O濃度によるXANESスペクトルの変化が廃棄物成分濃度による変化より大きいことを確認した。

論文

Key factors controlling radiocesium sorption and fixation in river sediments around the Fukushima Daiichi Nuclear Power Plant, 1; Insights from sediment properties and radiocesium distributions

舘 幸男; 佐藤 智文*; 赤木 洋介*; 川村 淳*; 中根 秀二*; 寺島 元基; 藤原 健壮; 飯島 和毅

Science of the Total Environment, 724, p.138098_1 - 138098_11, 2020/07

 被引用回数:13 パーセンタイル:58.17(Environmental Sciences)

福島第一原子力発電所周辺の河川流域における放射性Csの環境動態評価に資するため、汚染レベルが高い請戸川と小高川から採取された河川堆積物の特性を、放射性Csの収着と固定を支配する粒径サイズ, 粘土鉱物, 有機物に着目して評価した。

論文

Characterization of the PTW 34031 ionization chamber (PMI) at RCNP with high energy neutrons ranging from 100 - 392 MeV

Theis, C.*; Carbonez, P.*; Feldbaumer, E.*; Forkel-Wirth, D.*; Jaegerhofer, L.*; Pangallo, M.*; Perrin, D.*; Urscheler, C.*; Roesler, S.*; Vincke, H.*; et al.

EPJ Web of Conferences, 153, p.08018_1 - 08018_5, 2017/09

 被引用回数:0 パーセンタイル:0.03

欧州原子核研究機構(CERN)の放射線モニタとして、中性子、陽子、$$gamma$$線等の様々な放射線に対して有感な空気入り電離箱PTW-34031(PMI)が使用されている。PMIの各放射線に対する応答関数の計算では、CERNが開発を支援している放射線輸送計算コードFLUKAが用いられている。本研究では、このうち高エネルギー中性子に対するPMIの応答関数の精度検証のため、大阪大学核物理研究センター(RCNP)の$$^{7}$$Li(p,n)反応を利用した準単色中性子照射場において、100-392MeVの準単色中性子に対するPMIの応答関数を測定した。その結果、200MeV以下の準単色中性子照射において、中性子エネルギースペクトルの測定値を線源としたFLUKAによる応答関数の計算値と実験値はよく一致しすることがわかった。一方、250及び392MeVの場合、中性子場に$$^{7}$$Li(p,n)反応から生成する$$pi$$$$^{0}$$の崩壊に伴う$$gamma$$線が混在するため、中性子のみを線源とした計算値は実験値を過小評価することがわかった。

論文

Applicability of the two-angle differential method to response measurement of neutron-sensitive devices at the RCNP high-energy neutron facility

増田 明彦*; 松本 哲郎*; 岩元 洋介; 萩原 雅之*; 佐藤 大樹; 佐藤 達彦; 岩瀬 広*; 八島 浩*; 中根 佳弘; 西山 潤*; et al.

Nuclear Instruments and Methods in Physics Research A, 849, p.94 - 101, 2017/03

 被引用回数:0 パーセンタイル:10.71(Instruments & Instrumentation)

大阪大学核物理研究センターRCNPの陽子-リチウム核反応を用いた高エネルギー準単色中性子場は、放射線測定器の特性試験や校正などに利用されている。この中性子場のエネルギースペクトルは、0度方向に放出される中性子によるピーク部とそれ以外の角度に放出される連続部からなる。このうち、各試験で対象とするエネルギーはピーク部であるが、われわれは、これまでに0度と他角度方向に設置した検出器応答から、連続部の寄与を差し引く二角度差分法を開発してきた。本研究では、高密度ポリエチレン(HDPE)減速材付属のボナー球検出器に対する本手法の適用性を、96-387MeVの準単色中性子を用いて調査した。その結果、様々な大きさのHDPEに対して本手法は適応可能であることを検証できた。一方で、小型のHDPEは、中性子場のコリメータ,壁等による低エネルギー散乱中性子に感度を有するため、二角度差分法の他に、検出器の設置角度毎に低エネルギー散乱中性子に対する検出器応答の補正が必要である等、本中性子場を利用するユーザーに対する有益な指針を示すことができた。

報告書

軽イオンマイクロビーム分析/加工システムの改良

江夏 昌志; 石井 保行; 山田 尚人; 大久保 猛; 加田 渉*; 喜多村 茜; 岩田 吉弘*; 神谷 富裕; 佐藤 隆博

JAEA-Technology 2016-006, 41 Pages, 2016/03

JAEA-Technology-2016-006.pdf:14.03MB

日本原子力研究開発機構原子力科学研究部門高崎量子応用研究所のイオン照射研究施設では、これまでに、3MVシングルエンド加速器におけるMeV級軽イオンマイクロビームによる高空間分解能な局所元素分析・加工システムの開発を行ってきた。ここでは、加速器、ビーム輸送ライン及びマイクロビーム形成装置などの主構成機器に加えて、マイクロPIXE/PIGE(Particle Induced X-ray/Gamma-ray Emission)分析、三次元元素分布分析(PIXE-CT: Computed Tomography)、イオン誘起発光分析(IBIL: Ion Beam Induced Luminescence)及び微細加工(PBW: Proton Beam Writing)への応用研究に用いるための付帯装置・治具類に関する技術的な改良について、これらの機器・装置等の概要とともに纏める。

論文

Particle induced X-ray emission-computed tomography analysis of an adsorbent for extraction chromatography

佐藤 隆博; 横山 彰人; 喜多村 茜; 大久保 猛; 石井 保行; 高畠 容子; 渡部 創; 駒 義和; 加田 渉*

Nuclear Instruments and Methods in Physics Research B, 371, p.419 - 423, 2016/03

 被引用回数:7 パーセンタイル:55.37(Instruments & Instrumentation)

The cross-sectional distribution of neodymium (Nd) simulating minor actinides (MA) in a minute globular adsorbent of less than 50 $$mu$$m in diameter was measured using PIXE (particle induced X-ray emission)-CT (computed tomography) with a 3-MeV proton microbeam for the investigation of residual MA in extraction chromatography of spent fast reactor fuel. The measurement area was 100 $$times$$ 100 $$mu$$m$$^2$$ corresponding to 128 $$times$$ 128 pixels of projection images. The adsorbent target was placed on an automatic rotation stage with 9$$^{circ}$$ step. Forty projections of the adsorbent were finally measured, and image reconstruction was carried out by the modified ML-EM (maximum likelihood expectation maximization) method. As a result, the cross-sectional distribution of Nd in the adsorbent was successfully observed, and it was first revealed that Nd remained in the region corresponding to internal cavities of the adsorbent even after an elution process. This fact implies that the internal structure of the adsorbent must be modified for the improvement of the recovery rate of MA.

論文

TIARA静電加速器の現状

薄井 絢; 千葉 敦也; 山田 圭介; 横山 彰人; 北野 敏彦*; 高山 輝充*; 織茂 貴雄*; 金井 信二*; 青木 勇希*; 橋爪 将司*; et al.

第28回タンデム加速器及びその周辺技術の研究会報告集, p.117 - 119, 2015/12

原子力機構高崎量子応用研究所のイオン照射施設(TIARA)の3MVタンデム加速器、400kVイオン注入装置、3MVシングルエンド加速器の平成26年度における運転と整備の状況を報告する。シングルエンド加速器は、昇圧系トラブルによる2日間の研究利用運転の中止があったが、他の2台は、平成26年度に続き100%の稼働率を維持した。また、タンデム加速器はCoイオン(~12MeV, 3価)を新たに利用可能イオン種に加えた。タンデム加速器では、ターミナルの電圧安定度が極端に低下(1E-4以下)する現象について対策を講じた。加速電圧は、高電圧ターミナルの電圧測定値と電圧設定値の差分をもとに、ターミナルに蓄積される電荷量を制御することで安定に保たれる。電圧安定度の低下は、加速器のグランドベース(フレーム)から電源アースやCAMAC電源筐体を経由して電圧設定値の信号に誘導される100Hzの電源高調波ノイズが原因であると分かった。そこで、絶縁シートを用いて電源筐体とフレームの電気的絶縁及び電源アースの切り離しを試みた。その結果、電圧設定値の信号に誘導されていた100Hzのノイズが減少し、電圧安定度は2E-5程度に回復した。

論文

原子力機構TIARA施設の現状

湯山 貴裕; 石堀 郁夫; 倉島 俊; 吉田 健一; 石坂 知久; 千葉 敦也; 山田 圭介; 横山 彰人; 薄井 絢; 宮脇 信正; et al.

Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.302 - 304, 2015/09

日本原子力研究開発機構のイオン照射施設TIARAでは4台の加速器により、材料・バイオ技術の研究開発への利用を主として、広範囲のエネルギー及び多様なイオン種のビームを提供している。本発表では2014年度のTIARAの稼働状況、保守・整備及び技術開発を報告する。保守・整備及び技術開発の主要な内容を以下に示す。サイクロトロンの高周波系において、ショート板用接触子に焼損が発生したため、接触子の交換及び焼損箇所の研磨を行うことで復旧させた。原因調査の結果、経年劣化によりフィードバックケーブルが断線しかかっていたため、不必要な高電圧が印加されたことが原因と判明した。サイクロトロン制御システムに関して、サポートが停止されたWindows XPをWindows 7に変更し、これに伴い制御システムを更新するとともに、トレンドグラフのログデータ保存機能、操作画面上の制御対象一括選択機能の付加など、各種機能を向上させた。C$$_{60}$$イオンビームの計測に関して、複雑な二次荷電粒子を生成するC$$_{60}$$イオンビームの正確な電流測定のために、サプレッサー電極の構造を改良することで二次荷電粒子を十分捕集するファラデーカップを開発した。

論文

Response measurement of various neutron dose equivalent monitors in 134-387 MeV neutron fields

中根 佳弘; 萩原 雅之*; 岩元 洋介; 岩瀬 広*; 佐藤 大樹; 佐藤 達彦; 八島 浩*; 松本 哲郎*; 増田 明彦*; 布宮 智也*; et al.

Progress in Nuclear Science and Technology (Internet), 4, p.704 - 708, 2014/04

J-PARCのような高エネルギー加速器施設における放射線安全管理において、高エネルギー中性子による被ばく線量評価は極めて重要であることから、高エネルギー領域中性子に対する中性子線量当量モニタの測定精度を詳しく調べることが重要である。本研究では、J-PARC施設の放射線安全管理のために開発した高エネルギー対応中性子モニタを含む、4種類の高エネルギー帯域中性子モニタと、おもに20MeV以下の中性子場において広く用いられている3種類の市販の中性子モニタのエネルギー応答特性を、大阪大学RCNPの134-387MeV準単色中性子場を用いて測定し、測定結果の比較を行うとともに、場の中性子スペクトルと線量換算係数から求めた場の線量率との比較を行った。その結果、高エネルギー帯域モニタによる測定結果は場の線量率を再現若しくはわずかに上回ったのに対し、従来型モニタでは高エネルギー帯域モニタの10-30%程度の線量率となり、場の線量を過小評価する結果となった。

論文

Modification of teflon surface by proton microbeam and nitrogen ion beam

喜多村 茜; 佐藤 隆博; 江夏 昌志; 神谷 富裕; 小林 知洋*

Nuclear Instruments and Methods in Physics Research B, 314, p.82 - 85, 2013/11

 被引用回数:7 パーセンタイル:49.41(Instruments & Instrumentation)

The morphology of the Teflon surface was studied after two different ion beams. Many voids were observed only inside of the Teflon sample after the focused 3-MeV proton microbeam scanning. Micro-protrusions were formed in dense after keV nitrogen ion beam irradiation at the surface. The surface was smooth after proton microbeam scanning and subsequent nitrogen ion beam irradiation, because of melting due to localized temperature-rise. The morphological design can be achieved at the surface of Teflon material by combination of different ion beam irradiation.

論文

Fabrication of micro-prominences on PTFE surface using proton beam writing

喜多村 茜; 佐藤 隆博; 江夏 昌志; 小林 知洋*; 神谷 富裕

Nuclear Instruments and Methods in Physics Research B, 306, p.288 - 291, 2013/07

 被引用回数:8 パーセンタイル:53.67(Instruments & Instrumentation)

The unique microstructures were created at PTFE surface using proton beam writing. A conical structure about 250 $$mu$$m high were formed, when 3 MeV proton microbeam scanned spirally from the center at 500-$$mu$$m-thick PTFE surface. The structure was porous and the shape of the bottom corresponded to the beam scan pattern. The formation was caused by the volume expansion of the sample induced by the temperature elevation and the gas generation during the proton beam irradiation. The conical structure was fabricated by the upward volume expansion gradually advanced along the beam scan path.

論文

Microfabrication on Teflon surface by MeV-proton-microbeam and keV-nitrogen-ion-beam irradiation

喜多村 茜; 佐藤 隆博; 江夏 昌志; 小林 知洋*; 神谷 富裕

Nuclear Instruments and Methods in Physics Research B, 307, p.610 - 613, 2013/07

 被引用回数:6 パーセンタイル:44.21(Instruments & Instrumentation)

The micropatterns were created at PTFE surfaces covered with micro-protorusions using proton beam writing (PBW) and subsequent ion beam irradiation. The density of the inner sample was decreased by PBW and their patterns appeared after the keV ion beam irradiation. Their surface was very flat because they were melted by beam heating. The best fluenences of these beams for creating the surface were also obtained.

論文

Morphological change of self-organized protrusions of fluoropolymer surface by ion beam irradiation

喜多村 茜; 小林 知洋*; 佐藤 隆博; 江夏 昌志; 神谷 富裕; 鈴木 晶大*; 寺井 隆幸*

Nuclear Instruments and Methods in Physics Research B, 307, p.614 - 617, 2013/07

 被引用回数:7 パーセンタイル:49.41(Instruments & Instrumentation)

A Teflon surface was covered with micro-protorusions after keV ion beam irradiation. The dense protrusions were formed by etching and subsequent self-organizing. Their formation depended on the ion energy because beam heating and the amount of the molecule scissions gave a significant effect on the density of protrusions. The ion energy had the specific range to create a surface covered with protrusions. In the low energy below 60 keV, the fluence required for get protrusions was very high. The surface was almost smooth with few protrusions while in the energies higher than 350 keV. When the ion energy was between 60 and 350 keV, the density of the protrusions became lower with increasing the energy.

論文

フッ素系高分子材料の新しい微細加工技術を開発、イオンビームで

喜多村 茜; 佐藤 隆博; 江夏 昌志; 小林 知洋*; 神谷 富裕

放射線と産業, (134), p.37 - 40, 2013/06

「放射線と産業」のニュース記事として、イオンビームを用いてテフロン表面に三次元微小構造を作る最新の技術を報告する。テフロンは極めて高い化学薬品耐性を持つために広く利用されているが、一方で、この特長は薬品による処理ができず微細な加工が困難であるという欠点になっている。筆者らは2010年に、keV級イオンを注入することによりテフロン表面に多数の突起物が芝生状に形成することを発見し、これを足掛かりとして、MeV級のプロトンビームライティング(PBW)により、表面に微小構造体を隆起させる手法、試料内部を空洞にして中空構造体を作製する手法を次々と確立した。さらに、keV級イオン注入で前処理すると、MeV級PBWしても突起ができず平滑な面になることも見いだした。現在は、これらを組合わせて大きさや密度を制御した突起物と平滑面を二次元的かつ任意に配置し、しかもその領域の性質が異なる表面加工ができるようになった。

論文

Fabrication of micropatterns on teflon by proton beam writing and nitrogen ion beam irradiation

喜多村 茜; 佐藤 隆博; 江夏 昌志; 神谷 富裕; 小林 知洋*

Transactions of the Materials Research Society of Japan, 38(1), p.101 - 104, 2013/03

The micropatterns were fabricated at the Teflon surface covered with dense micro-protrusions. At first, a 3 MeV proton beam was scanned along the pattern at the surface of the original 100-$$mu$$m thick sample. The pattern could be observed with an optical microscope, but the morphological change was not appeared at the surface. After the subsequent irradiation of the 250-keV nitrogen ion beam irradiation, the surface was covered with micro-protrusions and the groove-like depression were appeared along the micropattern scanned by the proton beam. The mechanism was that the sample along the proton beam path was melted during the subsequent ion beam irradiation because their density, especially near the Bragg peak, had decreased. The morphological design can be achieved at the surface of Teflon material by combination of different ion beam irradiation.

論文

Fabrication of microstructure at a fluoropolymer surface by ion microbeam

喜多村 茜; 佐藤 隆博; 江夏 昌志; 神谷 富裕; 小林 知洋*

JAEA-Review 2012-046, JAEA Takasaki Annual Report 2011, P. 128, 2013/01

The raised microstructures were created at PTFE surface using ion microbeam. When 3-MeV proton microbeam scanned along a circle, the scanned area was roundly swelled in the case of a 100-$$mu$$m-thick sample. However, the shape was jagged at a surface of a 500-$$mu$$m-thick sample. The difference was caused by a variation in the speed of volume expansion along the ion trajectories. A porous conical structure was formed by spiral scanning from the center. In the other scan paths such as a raster, however, no raised structure appeared. The reason was that the volume expansion was enhanced only during the spiral scanning of the beams.

論文

Morphological change of PTFE by ion micro beam irradiation

喜多村 茜; 佐藤 隆博; 江夏 昌志; 神谷 富裕; 小林 知洋*

Transactions of the Materials Research Society of Japan, 37(2), p.219 - 222, 2012/06

Polytetrafluoroethylene (PTFE) is one of the most important materials for micro electro mechanical system and bio-chemical and medical tools due to its excellent properties. To fabricate microstructures on the surface, synchrotron radiation and ion beam irradiation are effective because PTFE is extremely sensitive to ionization radiation. However, the effects of fast light ion on morphological changes at PTFE surface are not yet clear. In this study, we performed the irradiation of 2-3 MeV proton beam focused on 1 $$mu$$m in diameter and fabricated micro structures on the PTFE surfaces by scanning the beam. As the results, only the irradiated areas were expanded to a direction perpendicular to the original surface due to temperature elevation and gas generation by PTFE molecular degradation during the irradiation. Controlling the thickness of the PTFE sheets and the scanning rate, we could fabricate the several shapes of structure.

論文

Response measurement of a Bonner sphere spectrometer for high-energy neutrons

増田 明彦*; 松本 哲郎*; 原野 英樹*; 西山 潤*; 岩元 洋介; 萩原 雅之*; 佐藤 大樹; 岩瀬 広*; 八島 浩*; 中村 尚司*; et al.

IEEE Transactions on Nuclear Science, 59(1), p.161 - 166, 2012/02

 被引用回数:11 パーセンタイル:66.72(Engineering, Electrical & Electronic)

大阪大学核物理研究センター(RCNP)において、$$^{7}$$Li(p,n)反応によって得られる245MeV及び388MeVの準単色中性子を用いて、ボナー球スペクトロメータの高エネルギー中性子に対する応答測定を行った。使用したボナー球スペクトロメータは、ポリエチレン,鉛,銅の6種類の減速材の組合せと球形$$^{3}$$He比例計数管で構成されている。高エネルギー中性子に対する応答は、準単色場の低エネルギー成分の影響を差し引いて求められる。その解析手法と解析結果、モンテカルロシミュレーション計算コードによる応答関数の検証について発表する。

論文

Characterisation of quadi-monoenergetic neutron energy spectra using $$^{7}$$Li(p,n) reactions at 246-389 MeV

岩元 洋介; 萩原 雅之*; 佐藤 大樹; 岩瀬 広*; 八島 浩*; 糸賀 俊朗*; 佐藤 達彦; 中根 佳弘; 中島 宏; 坂本 幸夫; et al.

Proceedings of 10th Meeting of the Task Force on Shielding Aspects of Accelerators, Targets and Irradiation Facilities (SATIF-10), p.53 - 61, 2011/03

大阪大学核物理研究センター(RCNP)において、1cm厚さのリチウムターゲットへの陽子照射で得られる138, 243, 387MeVの準単色中性子を用いて、10cmから100cm厚さの鉄及び25cmから200cm厚さのコンクリートの遮蔽体に対して遮蔽実験を行い、透過後の中性子エネルギースペクトルを測定した。スペクトル測定には、直径及び厚さがともに12.7cm及び25.4cmの2種類の液体有機シンチレータNE213とボナーボール中性子スペクトルメータを用いた。また、NE213の応答関数と検出効率も測定した。ピーク部の中性子スペクトルの導出には飛行時間法(TOF)を用い、連続部の中性子スペクトルの導出にはアンフォールディング法を適用した。さらに、中性子源の0度から30度方向の中性子エネルギースペクトルもTOF法で測定した。138MeVの準単色中性子入射における遮蔽体透過後の中性子エネルギースペクトルの実験値は、PHITSによる計算結果をよく再現した。

論文

Quasi-monoenergetic neutron energy spectra for 246 and 389 MeV $$^{7}$$Li(p,n) reactions at angles from 0$$^{circ}$$ to 30$$^{circ}$$

岩元 洋介; 萩原 雅之*; 佐藤 大樹; 岩瀬 広*; 八島 浩*; 糸賀 俊朗*; 佐藤 達彦; 中根 佳弘; 中島 宏; 坂本 幸夫; et al.

Nuclear Instruments and Methods in Physics Research A, 629(1), p.43 - 49, 2011/02

 被引用回数:21 パーセンタイル:82.84(Instruments & Instrumentation)

大阪大学核物理研究センター(RCNP)において、陽子エネルギー246MeV及び389MeVの$$^{7}$$Li(p,n)反応を用いた準単色中性子の2MeV以上のエネルギースペクトルを飛行時間法により測定・評価した。検出器には円柱型で直径及び厚さがそれぞれ5.08, 12.7, 25.4cmの3種類の液体有機シンチレータNE213を用いた。測定角度は0度から30度までの7角度である。中性子スペクトルは高エネルギーの準単色中性子ピーク部と低エネルギーまでの連続部からなり、角度ごとのピーク部と連続部の系統性をそれぞれ調べた。ピーク部の中性子強度の角度分布は、Taddeucciの経験式とよく一致し、ピーク部と連続部の中性子フラックスの絶対量はほぼ同じであった。この準単色中性子場を用いた、高エネルギー中性子モニターのDARWINやWendi等のピーク部に対する応答を測定するには、20度付近に設置したおもに連続部からなる中性子モニターの応答を差し引くことで、ピーク部の応答関数導出の補正を行う必要があることを提案した。

59 件中 1件目~20件目を表示