検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 4 件中 1件目~4件目を表示
  • 1

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

リチウムイオン電池内部の温度・応力分布のオペランド計測

平野 辰巳*; 前田 壮宏*; 村田 徹行*; 山木 孝博*; 松原 英一郎*; 菖蒲 敬久; 城 鮎美*; 安田 良*; 高松 大郊*

SPring-8/SACLA利用研究成果集(インターネット), 11(5), p.345 - 353, 2023/10

車載用リチウムイオン二次電池(LIB)のサイクル時の劣化要因として、高い電流レートにおける電池内部の温度上昇、リチウムイオンの正負極間移動にともなう電極の膨張・収縮による応力などが指摘されている。そこで、18650型LIB内部における温度・応力分布を同時に評価した。電流:1Cでの充電時、リチウムイオンの挿入により負極が膨張するため、負極の集電体であるCuは半径方向に圧縮応力が発生する。表面から2mmにおける充電時の半径方向の応力変化は88MPa減少した(圧縮)。一方、放電時において応力変化は98MPa増加し可逆的な変化を示した。高レートな4Cのサイクル充放電により内部温度は表面より10度も高い60度程度まで上昇する現象が確認できた。さらに、表面から6mmにおけるCuに応力が発生しない現象を捉えることに成功した。本結果から、18650型LIB内部における温度・応力分布を同時に評価するオペランド計測技術を確立し、高レートなサイクル充放電が18650LIB中心部の温度上昇の要因であること、および無拘束による電極内周部における膨張収縮がサイクル劣化の要因であることを明らかにした。

論文

In-operando measurement of internal temperature and stress in lithium-ion batteries

平野 辰巳*; 前田 壮宏*; 村田 哲之*; 山木 孝弘*; 松原 英一郎*; 菖蒲 敬久; 城 鮎美*; 安田 良*; 高松 大郊*

SPring-8/SACLA利用研究成果集(インターネット), 11(1), p.49 - 57, 2023/02

The temperature rise due to high current/power operations and stress caused by the expansion or contraction of electrodes by lithium (de)-intercalation is known to be a degradation factor in lithium-ion batteries (LIBs). Therefore, in this study, a new technique is proposed to simultaneously measure the internal temperature and stress in the 18650-type LIB during its operation. The operando measurement involved retaining a constant gage volume using rotating spiral slits, obtaining X-ray diffraction images using a highly sensitive two-dimensional detector, and employing the sin$$^{2}$$ $$psi$$ method to separate the stress and change in temperature. During the charging process, at the 1C current rate, the anode expansion, owing to the lithium intercalation, induced the radial compressive stress in the Cu anode collector. The radial stress changes of the Cu anode collector were -31 MPa (compression) and 44 MPa (tensile) during the 1C charge and discharge processes, respectively. Moreover, the internal temperature, which was higher than the surface temperature, was calculated by considering the radial stress change during the battery operation. During the 4C cycle, the surface and internal temperatures rose by 26 degree and 42 degree, respectively. The results indicate that the internal temperature and stress in the 18650-LIB were successfully measured during battery operation.

論文

Electrochemical reaction mechanisms under various charge-discharge operating conditions for Li$$_{1.2}$$Ni$$_{0.13}$$Mn$$_{0.54}$$Co$$_{0.13}$$O$$_{2}$$ in a lithium-ion battery

小西 宏明*; 平野 辰巳*; 高松 大郊*; 軍司 章*; Feng, X.*; 古月 翔*; 奥村 壮文*; 寺田 尚平*; 田村 和久

Journal of Solid State Chemistry, 262, p.294 - 300, 2018/06

 被引用回数:9 パーセンタイル:49.54(Chemistry, Inorganic & Nuclear)

Li$$_{1.2}$$Ni$$_{0.13}$$Mn$$_{0.54}$$Co$$_{0.13}$$O$$_{2}$$正極の充電過程において、各SOCでの電極電位は、放電過程より高い。この機構を明らかにするために、様々なSOCにおいて電気化学測定、XRD, XAFS測定を行った。その結果、Li$$_{1.2}$$Ni$$_{0.13}$$Mn$$_{0.54}$$Co$$_{0.13}$$O$$_{2}$$の格子状数や遷移金属の酸化状態が異なっていることが分かった。また、Li$$_{1.2}$$Ni$$_{0.13}$$Mn$$_{0.54}$$Co$$_{0.13}$$O$$_{2}$$中に、LiNi$$_{0.33}$$Mn$$_{0.33}$$Co$$_{0.33}$$O$$_{2}$$やLi$$_{2}$$MnO$$_{3}$$に類似した構造が存在することも明らかになった。

論文

Mechanisms responsible for two possible electrochemical reactions in Li$$_{1.2}$$Ni$$_{0.13}$$Mn$$_{0.54}$$Co$$_{0.13}$$O$$_{2}$$ used for lithium ion batteries

小西 宏明*; 平野 辰巳*; 高松 大郊*; 軍司 章*; Feng, X.*; 古月 翔*; 奥村 壮文*; 寺田 尚平*; 田村 和久

Journal of Solid State Chemistry, 258, p.225 - 231, 2018/02

 被引用回数:8 パーセンタイル:45.21(Chemistry, Inorganic & Nuclear)

リチウムイオン電池の正極材料であるLi$$_{1.2}$$Ni$$_{0.13}$$Mn$$_{0.54}$$Co$$_{0.13}$$O$$_{2}$$について、充放電過程における構造変化について調べた。実験結果から、充電過程ではSOCが大きくなるとともに、Li$$_{2}$$MnO$$_{3}$$,LiNi$$_{0.33}$$Mn$$_{0.33}$$Co$$_{0.33}$$O$$_{2}$$,Li$$_{2}$$MnO$$_{3}$$の順に結構構造が変化するのに対して、放電過程では、Li$$_{2}$$MnO$$_{3}$$,LiNi$$_{0.33}$$Mn$$_{0.33}$$Co$$_{0.33}$$O$$_{2}$$の順に結晶構造が変化することが分かった。

4 件中 1件目~4件目を表示
  • 1