検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 32 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Improvement of neutron diffraction at compact accelerator-driven neutron source RANS using peak profile deconvolution and delayed neutron reduction for stress measurements

岩本 ちひろ*; 高村 正人*; 上野 孝太*; 片岡 美波*; 栗原 諒*; 徐 平光; 大竹 淑恵*

ISIJ International, 62(5), p.1013 - 1022, 2022/05

 被引用回数:1 パーセンタイル:34.75(Metallurgy & Metallurgical Engineering)

Neutron diffraction is a powerful non-destructive method for evaluating the microscopic structure and internal stress of metal plates as a bulk average. Precise neutron diffraction measurements with a high intensity neutron beam have already been carried out at large-scale neutron facilities. However, it is not easy to provide users with enough experimental opportunities. We are working on upgrading the neutron diffractometer with techniques of time-of-flight to enable stress measurements at RIKEN accelerator-driven compact neutron source (RANS). To improve neutron diffraction resolution, delayed neutrons, which expand neutron beam pulse width, should be suppressed. However, it is difficult to separate the delayed neutrons experimentally. In this study, a new analysis method has been proposed to deconvolute the diffraction peak from the delayed neutron component. Moreover, a new collimator system, called decoupled collimator system, has been developed to reduce the number of delayed neutrons. The diffraction patterns from a powder sample of pure body-centered cubic iron were measured with the decoupled collimator and the diffraction peak of {211} reflection was analyzed by the new analysis method using a model function of a single exponential decay function convoluted with a Gaussian function. By this method, the decoupled collimator system has been confirmed to achieve a smaller measurement limit of lattice strain $$Delta$$$$varepsilon$$ than a small-aperture polyethylene collimator system and a non-collimator system. The currently available $$Delta$$$$varepsilon$$ was 6.7$$times$$10$$^{-4}$$, this means that the internal stress up to 130 MPa can be well evaluated for steel materials with a Young's modulus of 200 GPa at RANS.

論文

小型加速器中性子源RANSを使用した鋼材特性の分析技術開発; ものづくり現場で中性子線を使った材料分析が可能に

徐 平光; 高村 正人*; 岩本 ちひろ*; 箱山 智之*; 大竹 淑恵*; 鈴木 裕士

Isotope News, (774), p.7 - 10, 2021/04

近年、地球温暖化対策として、自動車などの軽量化に求められている中、高張力鋼板の成形性向上は重要な開発課題となっている。破断まで優れた伸び特性を持たせた高張力鋼板の開発には、オーステナイト組織の相分率と各構成相の集合組織を正しく制御することは極めて重要である。透過能に優れた中性子回折法は、鋼材内部の結晶情報をバルク平均で得られる特徴を持つことから、相分率と集合組織を測定する上で有力な手段である。しかし、現状では中性子回折測定が可能な中性子源は、研究用原子炉や大型加速器施設などの大型実験施設に限られ、これらは共用施設のため利用者が頻繁に測定する機会を得ることは困難である。そこで、理化学研究所では、大学や企業の研究室、工場などの現場で手軽に使える小型中性子源として「理研小型加速器中性子源RANS」を構築し、日本原子力研究開発機構と協力しながら鋼材特性の分析技術に関する一連の研究開発を進めてきた。本解説論文では、大型実験施設と比べるとビーム強度の低い小型加速器中性子源を用いて実施した、中性子回折法による相分率と集合組織測定に関する共同研究成果と、今後の展望を紹介する。

論文

中性子イメージング技術を用いた鉄筋コンクリートの変形破壊挙動の評価

上野 一貴*; 鈴木 裕士; 高村 正人*; 西尾 悠平*; 兼松 学*

コンクリート構造物の補修,補強,アップグレード論文報告集(CD-ROM), 20, p.273 - 278, 2020/10

本研究では、鉄筋コンクリートの引張載荷時のコンクリート内部の変形を、中性子イメージング技術と画像相関法を組み合わせて評価する技術の確立を目的とした。コンクリート内部に散布したガドリニウムマーカの座標を中性子イメージング技術により取得し、その座標を基に画像相関法を用いてコンクリート内部の変位分布を算出する技術を開発した。本技術により、コンクリートに発生したひび割れに沿った変位分布が計測され、表面の画像解析と併用することで、載荷経過毎のコンクリート表面と内部の変形を同時に評価できることを示した。

論文

In-house texture measurement using a compact neutron source

徐 平光; 池田 義雅*; 箱山 智之*; 高村 正人*; 大竹 淑恵*; 鈴木 裕士

Journal of Applied Crystallography, 53(2), p.444 - 454, 2020/04

AA2019-0242.pdf:2.9MB

 被引用回数:7 パーセンタイル:66.23(Chemistry, Multidisciplinary)

In order to improve the instrumental accessibility of neutron diffraction technique, the emerging compact neutron sources and in-house neutron diffractometers as a good complementary way have caused wide attention while their analysis precision seems problematic for the practical application. As a challenging project, the RIKEN accelerator-driven compact neutron source (RANS) was employed to establish the technical environment for texture measurement, and the recalculated pole figures and the orientation distribution function (ODF) of an interstitial-free (IF) steel sheet obtained from RANS were compared with the results from another two neutron diffractometers well-established for texture measurement. Moreover, the parameter "square integration of ODF difference" originally for evaluating the numerical error between the measured and simulated textures was generalized here to examine the reliability of RANS texture measurement. These quantitative comparisons revealed that the precise neutron diffraction texture measurement at RANS has been realized successfully and the following technical optimizations are much valuable, including the thickness selection of polyethylene moderator, the sample-to-detector distance, the B$$_{4}$$C shielding sheets for the reduced background noise, and the fine region division of the neutron detector panel. Moreover, the Rietveld texture analysis improves the texture reliability through avoiding the unfavorable influence of the uncertain diffraction intensity involved in the low counting, long wavelength incident neutrons at large scattering angles. Above technical results may accelerate the development of other easily accessible engineering materials evaluation techniques using compact neutron source, and also help to improve the data-collecting efficiency for various time-sliced scattering experiments at large neutron facilities.

論文

Convergence behavior in line profile analysis using convolutional multiple whole-profile software

熊谷 正芳*; 内田 知宏*; 村澤 皓大*; 高村 正人*; 池田 義雅*; 鈴木 裕士; 大竹 淑恵*; 浜 孝之*; 鈴木 進補*

Materials Research Proceedings, Vol.6, p.57 - 62, 2018/10

 被引用回数:0 パーセンタイル:0.18

The convergence behavior of the parameters related to microstructural characteristics $$a$$-$$e$$ was studied during optimizations in a common line profile analysis software program based on the convolutional multiple whole profile (CMWP) method. The weighted sums of squared residual (WSSR) was a criterion of the optimization. The parameters $$b$$ and $$d$$, which are related to the dislocation density and to the crystallite size, respectively, strongly affect the line profile shape. Therefore, the distributions of WSSRs on the space parameters $$b$$ and $$d$$ were first observed. The variation trajectory of parameters $$b$$ and $$d$$ during iterative calculations with several values of parameter $$e$$ was then observed, along with the variations when all of the parameters were variable. In the case where only three parameters were variable, we found that a smaller initial value of $$e$$ should be chosen to ensure stability of the calculations. In the case where all parameters were variable, although all of the results converged to similar values, they did not precisely agree. To attain accurate optimum values, a two-step procedure is recommended.

論文

Determination approach of dislocation density and crystallite size using a convolutional multiple whole profile software

村澤 皓大*; 高村 正人*; 熊谷 正芳*; 池田 義雅*; 鈴木 裕士; 大竹 淑恵*; 浜 孝之*; 鈴木 進補*

Materials Transactions, 59(7), p.1135 - 1141, 2018/07

 被引用回数:7 パーセンタイル:37.12(Materials Science, Multidisciplinary)

Neutron diffraction profile analysis using the whole profile fitting method is useful for obtaining microscopic information on metallic materials. To determine an appropriate fitting approach for obtaining reasonable and non-arbitrary results, we applied diffraction line profile analyses using the Convolutional Multiple Whole Profile (CMWP) method to diffraction patterns obtained using the Engineering Materials Diffractometer (TAKUMI, BL19) at the Materials and Life Science Facility (MLF) of the Japan Proton Accelerator Research Complex (J-PARC). The tensile specimens of 780 MPa grade bainitic steel were uniaxially stretched until the plastic strain reached a value of 0.05. We performed CMWP analyses on the obtained diffraction patterns during tensile test with various initial parameters of dislocation density and crystallite size. These parameters were optimized in the fitting procedures to minimize the weighted sums of squared residuals (WSSRs). Following this approach, we found that unsuitable initial parameter values resulted in unreasonable convergence. Therefore, initial fitting parameters should be chosen to ensure that the initial profiles are as broad as possible. Reasonable results were obtained following this suggestive approach even when the strain anisotropy parameter is set to arbitrary values.

論文

小型中性子源の現場利用を目指した残留オーステナイト相分率測定手法の開発

池田 義雅*; 高村 正人*; 箱山 智之*; 大竹 淑恵*; 熊谷 正芳*; 鈴木 裕士

鉄と鋼, 104(3), p.138 - 144, 2018/03

 被引用回数:4 パーセンタイル:22.98(Metallurgy & Metallurgical Engineering)

得られる情報が材料表面に限られるX線回折法や電子線後方散乱回折法に比べて、中性子工学回折法は、鉄鋼材料のバルク平均の微視組織の評価が可能な優れた測定技術である。しかしながら、中性子回折法による測定は、原子炉や放射光といった大型実験施設で実施可能なものであり、これまでに小型中性子源が利用されることはなかった。われわれは、陽子線加速器駆動理研小型中性子源RANSを開発するとともに、それを利用することで鉄鋼材料の集合組織変化の実測に成功した。本研究では、RANSを用いて残留オーステナイトの体積率の測定に挑戦した。低フラックスの中性子によりできる限り多くの回折ピークを得るために、バックグランドノイズをできるだけ低減した。体積率はリートベルト解析によって求めた。J-PARCのMLFに設置された工学材料回折装置TAKUMIによって得られた結果と比較すると、RANSにて30分から300分の測定で得られた体積率は、1-2%の誤差で一致した。このように、RANSによる中性子回折を用いることにより、結晶相の体積率の定量解析に成功するなど、工場などにおける小型中性子源の実用化に可能性を示した。

論文

Prospect for application of compact accelerator-based neutron source to neutron engineering diffraction

池田 義雅*; 竹谷 篤*; 高村 正人*; 須長 秀行*; 熊谷 正芳*; 大場 洋次郎*; 大竹 淑恵*; 鈴木 裕士

Nuclear Instruments and Methods in Physics Research A, 833, p.61 - 67, 2016/10

 被引用回数:37 パーセンタイル:96.72(Instruments & Instrumentation)

小型中性子源を利用した透過イメージングや小角散乱、反射率測定など、小型中性子源による工学的応用に関する議論が広まるなか、小型中性子源のフラックスの低いゆえに回折実験に関する検討はなされてこなかった。そこで本研究では、理化学研究所の小型加速器中性子源RANSを用いることにより、中性子工学回折実験への応用の可能性について検討した。まず、光学系の最適化によるバックグラウンドノイズの低減により、10分間の測定でも十分に認識可能な回折パターンを得ることができた。110回折のプロファイルから計算した分解能は約2.5%であり、中性子回折によるひずみ測定には不十分である。RANSのモデレータによる減速時間が約30$$mu$$sと分解能の決定に最も支配的なパラメータであることから、モデレータの改良が分解能の向上につながる。一方で、回折パターンの変化から、塑性変形に伴う集合組織の変化をとらえることに成功するとともに、リートベルトコードによる回折パターンのフィッティングにより、オーステナイト相の体積率の評価にも成功した。RANSは、集合組織や残留オーステナイト量の測定を目的とした中性子工学回折の応用に有効と考えられる。

論文

Texture evaluation in ductile fracture process by neutron diffraction measurement

須長 秀行*; 高村 正人*; 池田 義雅*; 大竹 淑恵*; 浜 孝之*; 熊谷 正芳*; 鈴木 裕士; 鈴木 進補*

Journal of Physics; Conference Series, 734(Part B), p.032027_1 - 032027_4, 2016/09

 被引用回数:0 パーセンタイル:0.03

フェライト鋼における延性破壊のミクロ挙動を評価するために中性子回折実験を行った。引張試験の破断までの過程において、ネッキングにより体積減少する場所の回折パターンの連続的な変化を測定した。その結果、塑性変形の増加に伴い、引張方向に(110)方位の向く結晶粒の数が増加する様子が見られた。ネッキングの発生に伴い、その増加率の減少が見られることから、ネッキングの発生により集合組織の発達機構が変化すると考えられる。

論文

Non-destructive texture measurement of steel sheets with compact neutron source "RANS"

高村 正人*; 池田 義雅*; 須長 秀行*; 竹谷 篤*; 大竹 淑恵*; 鈴木 裕士; 熊谷 正芳*; 浜 孝之*; 大場 洋次郎*

Journal of Physics; Conference Series, 734(Part B), p.032047_1 - 032047_4, 2016/08

 被引用回数:4 パーセンタイル:86.54

中性子回折法は、中性子線の優れた透過能を活かすことで、金属材料のバルク集合組織を測定できる技術として知られている。しかしながら、この測定技術は、原子炉や加速器施設などの大型実験施設を必要とするため、あまり広く利用されていないのが現状である。一方、理研小型中性子源(RANS)は、実験室レベルで容易に利用できる中性子源として開発されている。本研究では、RANSを用いることにより、塑性変形した鋼板の集合組織の変化を捉えることに成功した。本結果は、金属材料のミクロ組織解析に対する小型中性子源の可能性を示すものであり、塑性変形挙動のより良い理解につながるものと期待される。

論文

ITPA(国際トカマク物理活動)会合報告,19

笹尾 真実子*; 草間 義紀; 河野 康則; 川端 一男*; 間瀬 淳*; 杉江 達夫; 藤田 隆明; 福田 武司*; 福山 淳*; 坂本 宜照; et al.

プラズマ・核融合学会誌, 83(9), p.779 - 782, 2007/09

2007年春季に開催された国際トカマク物理活動(ITPA)の7つのトピカルグループ(TG)会合の報告である。各会合では、国際熱核融合実験炉(ITER)等の燃焼プラズマ実験における重要度の高い物理課題に関して、議論・検討が行われた。日本からの参加者数は27人であった。以下に、TGごとの開催日程及び開催地を示す。(1)計測TG:3月26日-30日、プリンストン(米国),(2)輸送物理TG:5月7日-10日、ローザンヌ(スイス),(3)閉じ込めデータベースとモデリングTG:5月7日-10日、ローザンヌ(スイス),(4)周辺及びペデスタルの物理TG:5月7日-10日、ガルヒン(ドイツ),(5)定常運転TG:5月9日-11日、大田(韓国),(6)MHD TG:5月21日-24日、サンディエゴ(米国),(7)スクレイプオフ層及びダイバータ物理TG:5月7日-10日、ガルヒン(ドイツ)。

論文

カラー図解,プラズマエネルギーのすべて

高村 秀一*; 門 信一郎*; 藤井 隆*; 藤山 寛*; 高部 英明*; 足立 和郎*; 森宮 脩*; 藤森 直治*; 渡辺 隆行*; 林 泰明*; et al.

カラー図解,プラズマエネルギーのすべて, P. 164, 2007/03

核融合並びにプラズマに興味を持ってもらい、またその有用性,将来性を広く理解してもらうための一般向け解説書として、プラズマ・核融合学会の企画(日本実業出版社から出版予定)に共同執筆で出版するものである。読者の対象範囲は、理科に興味を持つ高校生,大学生・一般社会人,ある種のプラズマに仕事で関連している人で、他分野からのヒントを求める人など、広い層に読んでもらえることを想定している。(目次:はじめに/プラズマってなんだ?/プラズマ技術のひろがり/実験室の超先端プラズマ/核融合プラズマエネルギーとは?/プラズマエネルギーへの道/核融合プラズマエネルギー発電所を目指して/プラズマエネルギーと未来社会)

論文

ITPA(国際トカマク物理活動)会合報告,18

川端 一男*; 河野 康則; 草間 義紀; 間瀬 淳*; 笹尾 真実子*; 杉江 達夫; 藤田 隆明; 福田 武司*; 福山 淳*; 坂本 宜照; et al.

プラズマ・核融合学会誌, 83(2), p.195 - 198, 2007/02

2006年の秋季にITPA(国際トカマク物理活動)に関する7つの会合が開催された。「輸送物理」,「閉じ込めデータベースとモデリング」,「周辺及びペデスタルの物理」,「定常運転」,「MHD」の5会合は、中国の成都にて「第21回IAEA核融合エネルギー会議」に引き続いて行われ、トピカルグループ間の合同会合も多数開かれた。国際装置間比較実験の結果報告のほか、国際熱核融合実験炉(ITER)のデザインレビューに関して、現状の設計への問題提起と解決策の検討を整理するためまとめられているITER Issue Cardについて活発な議論が行われた。日本の参加者は27名に上った。また、「計測」の会合は、東北大学で、「スクレイプオフ層及びダイバータ物理」の会合は、カナダのトロント大学で行われた。

論文

ITPA(国際トカマク物理活動)会合報告,17

朝倉 伸幸; 加藤 隆子*; 仲野 友英; 高村 秀一*; 田辺 哲朗*; 飯尾 俊二*; 中島 徳嘉*; 小野 靖*; 小関 隆久; 武智 学; et al.

プラズマ・核融合学会誌, 82(7), p.448 - 450, 2006/07

2006年の1月から4月にかけて開催されたITPA(国際トカマク物理活動)の7つのトピカル物理グループ(「スクレイプオフ層及びダイバータ物理」,「MHD」,「周辺及びペデスタルの物理」,「定常運転」,「計測」,「輸送物理」,「閉じ込めデータベースとモデリング」)の会合に関する報告である。7つの会合を合わせて、原子力機構から担当委員12名が参加するとともに、委員外4名が発表を行った。磁場リップル低減のためのフェライト鋼装着後のプラズマ性能の向上等のJT-60の実験結果が報告された。

論文

ITPA(国際トカマク物理活動)会合報告,13

河野 康則; 川端 一男*; 草間 義紀; 笹尾 真実子*; 杉江 達夫; 間瀬 淳*; 朝倉 伸幸; 加藤 隆子*; 高村 秀一*; 田辺 哲朗*; et al.

プラズマ・核融合学会誌, 81(2), p.128 - 130, 2005/02

2004年の秋季に、ITPA(国際トカマク物理活動)に関する7つの会合が開催された。「計測」グループ会合は10月に中国で行われたが、その他の6つのグループ(スクレイプオフ層及びダイバータ物理,輸送物理,閉じ込めデータベースとモデリング,定常運転,MHD・ディスラプション・制御,周辺及びペデスタルの物理)会合は第20回IAEA核融合エネルギー会議(2004年11月1日$$sim$$6日,ポルトガル,ヴィラモウラ)の翌週にリスボンのリスボン工科大学に集中して開かれた。調整委員会議長の提案で開催された全体会合をはじめ、トピカルグループの合同会合も多数開かれ、国際装置間比較実験の結果報告と活発な議論が行われた。ITPA及び国際装置間比較実験へ日本側から多くの継続した寄与が望まれることから、本会合では初めて核融合フォーラムから滞在費・旅費の補助が大学及び研究機関の研究者9名に対し行われ、各グループの重要課題の解決及び国際研究活動の進展に貢献した。2005年の会合予定も併せて示した。

口頭

Neutron diffraction bulk texture measurement using compact neutron source

徐 平光; 角田 龍之介*; 高村 正人*; 大竹 淑恵*; 鈴木 裕士

no journal, , 

Neutron diffraction is a powerful probe to acquire the bulk averaged information for better bridging the microscopic crystal lattice with the macroscopic properties, in contrast with the X-ray and electron diffractions which are capable for investigating the surface/very limited local regions of polycrystalline materials. In Japan, the RIKEN compact accelerator-driven neutron source facility (RANS) has been developing to improve the instrumental accessibility of neutron diffraction experimental studies, which were mostly carried out on large-scale neutron source facilities. Here, our latest technical progress in RANS neutron diffraction bulk texture measurement will be reported. The comparable study between RANS and another large-scale neutron diffraction facility suggests that the high stereographic resolution realized through the proper fine division of neutron detector panel is valuable to improve the precision and reliability of texture measurement, together with the careful scattering intensity correction of neutron patterns.

口頭

Energy resolution evaluation of decoupled neutron moderator for stress measurements via neutron diffraction with compact neutron source

角田 龍之介*; 高村 正人*; 徐 平光; 岩本 ちひろ*; 高梨 宇宙*; 大竹 淑恵*; 栗原 諒*; 高橋 進*; 鈴木 裕士

no journal, , 

During the production of high-strength steel structural parts, the residual stress is necessary to be well controlled for the better dimensional accuracy and the longer service life. The neutron diffraction measurement is a good candidate to monitor the microscopic lattice strain of polycrystalline materials in bulk average. RANS (Riken Accelerator-driven Compact Neutron Source) has been developed and upgraded aiming at in-house, on-site and on-demand measurements to meet with industrial needs. Recently, the phase volume fractions and the bulk textures of steel materials have been measured successfully at RANS. In order to measure the lattice strain at RANS, it is required to improve the energy resolution to observe slight peak shift, and the decoupled moderator is thought as a good solution method for that. In this study, a new decoupled moderator consisting of polyethylene with 20 cmm thickness and B$$_{4}$$C rubber was designed and fabricated, and its neutron beam characteristic was investigated in order to improve the time energy resolution to realize in-house neutron stress measurement at RANS. Here, the preliminary results of the resolutions comparing between the new decoupled moderator and the traditional coupled moderators with 20 and 40 mm thickness polyethylene will be reported together with the scattering angle dependent instrumental resolution of the linear neutron position-sensitive detector.

口頭

鉄鋼材料の集合組織測定研究に関する大型中性子施設とRIKEN小型中性子源の連携

徐 平光; 高村 正人*; 池田 義雅*; 角田 龍之介*; 高橋 進*; 箱山 智之*; 岩本 ちひろ*; 大竹 淑恵*; 鈴木 裕士

no journal, , 

自動車の軽量化のために使用されている高張力薄鋼板は、プレス成形による加工性が低いことから、生産不良が多い。そのため、プレス成形性を向上させる手段の一つとして、鋼材の集合組織制御に期待が寄せられている。実用に供される金属材料の微視組織は不均一な集合組織を有している。圧延板の加工性など金属材料のマクロな特性を議論する際には、金属材料のバルク平均の集合組織を考慮することが適切だと考えられる。中性子線を用いた集合組織測定は、高い透過性と大きなゲージ体積という特徴を生かして、加工性に直結する金属材料のバルク平均情報を容易に測定することができる。しかしながら、日本国内に限らず、世界中には、集合組織が測定できる中性子回折装置が極めて少ない。そこで、我々は研究用原子炉施設(JRR-3)の定常中性子源と大強度陽子加速器施設(J-PARC)のパルス中性子源を用いた集合組織測定技術を確立し、世界トップレベルの測定精度を有する集合組織測定装置を開発した。近年、中性子評価技術をより広く普及するため、理化学研究所が"いつでも、どこでも、手軽に利用できる"をキャッチフレーズとした小型中性子源(RANS)の開発を進めており、我々がこれまでに培ってきたノウハウを最大限に生かして、RANSを用いた粉末回折技術や集合組織測定技術の開発に挑戦してきた。本発表では、JRR-3, J-PARCおよびRANSで開発した鉄鋼材料の集合組織測定技術を簡単に紹介するとともに、中性子回折による集合組織測定研究に関して大型中性子施設と小型中性子源との連携案について議論する。

口頭

Neutron diffraction with RANS for industrial "on-site" applications

高村 正人*; 岩本 ちひろ*; 徐 平光; 角田 龍之介*; 栗原 諒*; 箱山 智之*; 池田 義雅*; 鈴木 裕士; 大竹 淑恵*

no journal, , 

High strength steels are becoming more and more important in automotive body structures for good weight reduction, providing further requirement in the balance between strength and formability. Numerical models in forming simulations taking into account the texture evolution may accurately analyze macroscopic plastic behavior, through referring to local surface texture measurement using Electron backscatter diffraction or X-ray diffraction. In contrast, neutron diffraction may measure the microstructure factors including bulk-averaged texture, enable to more deeply understand the mechanisms of deformation behavior. Such neutron diffraction studies usually require large-scale experimental facilities like a reactor and a large accelerator, so meet certain difficulty in the instrumental accessibility. To solve these problems, Riken Accelerator-driven Compact Neutron Source (RANS) has been developed. On-site evaluation of microstructural factors enables us to analyze metal deformation processes more efficiently. Authors have recently succeeded in accurately measuring the texture evolution of an IF steel and also in determining the retained austenite volume fraction of multi-phase steels, by optimizing the beam condition and layout of collimators, samples, detectors, etc. These results show the possibility of practical use of an in-house compact neutron source in laboratories of universities, research institutes and industrial firms.

口頭

In-house texture measurement using RIKEN accelerator-driven compact neutron source

徐 平光; 高村 正人*; 池田 義雅*; 角田 龍之介*; 岩本 ちひろ*; 箱山 智之*; 大竹 淑恵*; 鈴木 裕士

no journal, , 

Neutron diffraction is known as a powerful probe to determine the bulk averaged microstructural factors of metals and alloys. Compact neutron sources are being paid much attention for providing wide instrumental accessibility towards many potential on-site neutron diffraction applications, because of less technical complexity compared with large-scale neutron facilities. Here, the RIKEN Accelerator-Driven Compact Neutron Source (RANS) has been developed to establish the in-house technical environment of engineering diffraction for texture measurements. The measured texture of an interstitial-free (IF) steel sheet at RANS was found well consistent with the corresponding result obtained from a large-scale high-resolution time-of-flight neutron diffractometer. Such comparison suggests that RANS may be used to evaluate the ex situ texture characteristics of steel materials. Moreover, the increment of the output power and the addition of the neutron detector will be carried out in near future to enable rapid microstructural factor measurement of other high value-added metallic materials.

32 件中 1件目~20件目を表示