検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 28 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

High density mapping systems for SRF cavities

不破 康裕; 岩下 芳久*; 栗山 靖敏*; 頓宮 拓*; 早野 仁司*; Geng, R. L.*

Proceedings of 20th International Conference on RF Superconductivity (SRF 2021) (Internet), p.323 - 325, 2022/05

超伝導空洞の性能評価のため、空洞温度、電解放出X線、捕獲磁束の分布を高い位置分解能で測定するマッピングシステムを開発している。高い位置分解能を有するシステムを構築するには数多くのセンサーが必要であるが、センサーの個数が増加するとそれに伴い配線の量も増加するため低温用器内の配線が複雑さが増すことや配線を通じた熱侵入も大きくなるなど効率的な実験を妨げる要因となる。そこで本研究では、空洞試験を行う低温用器内でセンサーと同一基板上に読み出し信号をスキャンするマルチプレクサーを設置した効率的なマッピングシステムを開発している。本発表では開発中のマッピングシステムの概要と試験結果を報告する。

論文

Design and development of superconducting spoke cavity for compact photon source

沢村 勝; 羽島 良一; 久保 毅幸*; 佐伯 学行*; 岩下 芳久*; 頓宮 拓*; 鉾之原 久雄*; Cenni, E.*

Proceedings of 17th International Conference on RF Superconductivity (SRF 2015) (Internet), p.1196 - 1199, 2015/12

スポーク空洞はレーザーコンプトン散乱を用いたX線源のためのコンパクトなERL加速器において利点が多いと期待される。製造方法を確立するため文部科学省の研究プログラムによりスポーク空洞の開発を行っている。高周波特性が良くなるように設計したためスポーク空洞形状が複雑になり、プレス加工手順も含めた金型の設計や真空耐圧のためのサポート部品の設計を機械設計シミュレーションにより行っている。ここではスポーク空洞製作の現状について報告する。

論文

ERL超伝導スポーク空洞製作の現状

沢村 勝; 羽島 良一; 西森 信行; 永井 良治; 岩下 芳久*; 頓宮 拓*; 久保 毅幸*; 佐伯 学行*

Proceedings of 12th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.583 - 586, 2015/09

スポーク空洞の利点を生かせば、ERL加速器を小型化できる可能性が期待できるため、光・量子融合連携研究開発プログラム「小型加速器による小型高輝度X線源とイメージング基盤技術開発」における小型加速器の候補として超伝導スポーク空洞の開発を進めている。スポーク空洞は形状が複雑であるため、プレス加工工程を含めた金型設計や強度計算による補強検討等を行っているので、スポーク空洞製作の現状について報告する。

論文

Development of superconducting spoke cavities for laser Compton scattered X-ray sources

羽島 良一; 沢村 勝; 久保 毅幸*; 佐伯 学行*; Cenni, E.*; 岩下 芳久*; 頓宮 拓*

Proceedings of 6th International Particle Accelerator Conference (IPAC '15) (Internet), p.2902 - 2904, 2015/06

レーザーコンプトン散乱X線源のための超伝導スポーク空洞の研究開発が、文部科学省の研究プログラムとして採択された。2013年度から5年間のプログラムでは、325MHz超伝導スポーク空洞の設計、製作、性能測定を実施する予定である。本論文では、電磁場解析、応力解析の結果を反映した空洞形状の最適化、プレス加工のための金型設計などについて報告する。

論文

Multipactor simulations in 325 MHz superconducting spoke cavity for an electron accelerator

久保 毅幸*; 佐伯 学行*; Cenni, E.*; 岩下 芳久*; 頓宮 拓*; 羽島 良一; 沢村 勝

Proceedings of 6th International Particle Accelerator Conference (IPAC '15) (Internet), p.2892 - 2894, 2015/06

レーザーコンプトン散乱を用いたコンパクトで産業利用可能なX線源を実現するために、4Kで運転できる325MHzの超伝導スポーク空洞の開発を行っている。空洞形状の最適化はほぼ終わったが、現在マルチパクターの評価計算を行っている。シミュレーションと解析の結果について報告する。

論文

Development of superconducting spoke cavity for electron accelerators

久保 毅幸*; 佐伯 学行*; Cenni, E.*; 藤澤 博*; 岩下 芳久*; 頓宮 拓*; 羽島 良一; 沢村 勝

Proceedings of 27th International Linear Accelerator Conference (LINAC 2014) (Internet), p.1030 - 1033, 2014/12

レーザーコンプトン散乱を用いた小型で産業利用可能なX線源を実現するため、電子加速器用の325MHz超伝導スポーク空洞の開発を行っている。空洞形状の最適化は遺伝的アルゴリズムを用いて行っており、詳細設計を行うためにマルチパクターの計算を現在行っている。さらに製作に向けての検討も行っているので、それらについて発表を行う。

論文

ERL超伝導スポーク空洞開発の現状

沢村 勝; 永井 良治; 西森 信行; 羽島 良一; 岩下 芳久*; 藤澤 博*; 頓宮 拓*; 久保 毅幸*; 佐伯 学行*

Proceedings of 11th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.618 - 620, 2014/10

スポーク空洞は、空洞間隔を短くできることや、マイクロフォニックスによる空洞周波数の変動も小さいこと、セル間のカップリングが強く電界分布調整が容易なことなどERL加速器として用いる場合に利点が大きい。光・量子融合連携研究開発プログラム「小型加速器による小型高輝度X線源とイメージング基盤技術開発」における小型加速器の候補として4Kで高電界加速運転可能な325MHz超伝導スポーク空洞の開発を進めている。これまで行ってきた空洞形状の最適化結果をもとに、空洞製作工程の検討を行っている。スポーク部分は形状が複雑であり、スプリングバック等による成型誤差等を考慮しながら金型設計を進めており、それらを含めスポーク空洞開発の現状について報告する。

論文

Ultralow emittance beam production based on Doppler laser cooling and coupling resonance

野田 章*; 中尾 政夫*; 岡本 宏巳*; 大崎 一哉*; 百合 庸介; 想田 光*; 頓宮 拓*; 神保 光一*; Grieser, M.*; He, Z.*; et al.

Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.28 - 33, 2014/07

Three-dimensional (3D) cooling of 40-keV $$^{24}$$Mg$$^+$$ ion beams with Doppler laser cooling and the coupling resonance has been demonstrated in the storage ring S-LSR of Kyoto University toward the production of ultralow-emittance beams, in other words, ultracold beams and so-called crystalline beams. So far, the transverse temperatures of 6 K and 2 K have been experimentally attained in the horizontal and vertical directions, respectively, at a low beam intensity of about $$10^4$$ ions in the ring. These temperatures are the lowest ever attained by laser cooling of ion beams. Systematic molecular dynamics simulations predict the realization of further lower temperatures, $$approx$$ 1 mK and $$approx$$ 0.1 K in the longitudinal and transverse directions, respectively, if the laser spot size and detuning are properly adjusted even with such a low laser power ($$approx$$ 10 mW) as utilized in the experiments at S-LSR. A 3D ordered state of the beam with 3D laser cooling is also predicted. Recent experimental achievements and latest simulation results are presented.

論文

Development of superconducting spoke cavity for laser Compton scattered photon sources

沢村 勝; 羽島 良一; 永井 良治; 久保 毅幸*; 藤澤 博*; 岩下 芳久*; 頓宮 拓*

Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.1946 - 1948, 2014/07

レーザーコンプトン散乱(LCS)光源のためにスポーク空洞を開発するプログラムが5か年の計画で立ち上がった。LCSからのX線・$$gamma$$線を産業・学術分野で幅広く利用していくために、電子加速器として325MHzスポーク空洞を採用した。スポーク空洞は元々イオンや陽子の加速器として発明されたが、スポーク空洞の特徴であるコンパクト性やセル間の結合が強いことによる製作誤差に対する安定性、カップラーを円筒側面に取り付けることによるパッキングファクターの向上などを最大に活かすことができる。現在の研究計画と空洞形状の最適化の結果を述べる。

論文

Multipactor simulation on superconducting spoke cavity for laser Compton scattered photon sources

岩下 芳久*; 藤澤 博*; 頓宮 拓*; 羽島 良一; 永井 良治; 沢村 勝; 久保 毅幸*

Proceedings of 5th International Particle Accelerator Conference (IPAC '14) (Internet), p.2543 - 2545, 2014/07

レーザーコンプトン散乱のための超伝導スポーク空洞の開発を行っている。電子加速のための空洞周波数は325MHzであり、同じ周波数の楕円空洞より小さくなる。空洞は複雑な構造のためマルチパクターの影響を受けることになる。現在行っているマルチパクターの解析について発表する。

論文

S-LSRにおける水平方向のレーザー冷却に関連したシンクロトロン振動

神保 光一*; 想田 光*; 中尾 政夫*; 百合 庸介; 頓宮 拓*; 野田 章*

Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.1057 - 1059, 2014/06

A bunched 40-keV Mg$$^+$$ beam at an ion storage/cooler ring, S-LSR, Kyoto University, was cooled transversely through synchro-betatron coupling by a co-propagating laser. The cooled ion beams were optically diagnosed with spontaneous emission in the experiment. As the number of ions is smaller in the beam, however, it is more difficult to observe light emitted from the beam. The synchrotron-oscillation signals induced on a parallel-plate pickup were, therefore, investigated spectroscopically to see whether they were useful for beam diagnostics. We discuss the space charge effect of the signals. It is expected that, if the beam temperature is decreased drastically, the space charge effect is enhanced and the peaks related to the synchrotron oscillation are consequently suppressed.

論文

イオン蓄積・冷却リングS-LSRでのMgイオンビームのレーザー冷却

野田 章*; 中尾 政夫*; 想田 光*; 頓宮 拓*; 岡本 宏巳*; 大崎 一哉*; 百合 庸介; 神保 光一*; Grieser, M.*; He, Z.*

Proceedings of 10th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.143 - 145, 2014/06

We have experimentally demonstrated transverse indirect laser cooling utilizing synchro-betatron resonance coupling in the ion accumulation cooler ring S-LSR. However, its efficiency was rather poor for relatively high beam intensity of $$10^7$$ ions in the ring due to beam heating by intra-beam scattering and its cooling time was as long as 100 s. By application of beam scraping and optimization of laser detuning together with equilibrium deceleration with the use of an induction accelerator, we could reach the lowest transverse temperatures ever attained by laser cooling as 7.0 K and 2.1 K for the horizontal and vertical directions, respectively. The prospect of generating an ultra-low-temperature beam and realizing beam crystallization will be discussed on the basis of the present result.

論文

Simulation study on transverse laser cooling and crystallization of heavy-ion beams at the cooler storage ring S-LSR

百合 庸介; 大崎 一哉*; 岡本 宏巳*; He, Z.*; 想田 光*; 野田 章*; 中尾 政夫*; 頓宮 拓*; 神保 光一*

Proceedings of Workshop on Beam Cooling and Related Topics (COOL '13) (Internet), p.162 - 165, 2013/11

Efficient transverse laser cooling of a low-intensity heavy-ion beam has been recently accomplished experimentally by means of the resonant coupling method at the cooler storage ring S-LSR of Kyoto University. In parallel with the experimental effort, multi-dimensional laser cooling of the ion beam has been studied also numerically with the molecular dynamics (MD) simulation code in which the stochastic interaction between ions and laser photons is incorporated in order to search optimum laser-cooling conditions and verify the results of the experiment. The present MD result demonstrates that, in spite of the limited experimental conditions of the cooling laser such as low power, fixed frequency, and short cooling section, a three-dimensionally low-temperature beam of 40-keV $$^{24}$$Mg$$^+$$ can be obtained through resonant coupling at a low intensity of $$10^4$$ ions in the ring, which is consistent with the experimental result.

論文

Latest results of experimental approach to ultra-cold beam at S-LSR

野田 章*; 中尾 政夫*; 想田 光*; 頓宮 拓*; 岡本 宏巳*; 大崎 一哉*; 百合 庸介; 神保 光一*; Grieser, M.*; He, Z.*

Proceedings of Workshop on Beam Cooling and Related Topics (COOL '13) (Internet), p.157 - 161, 2013/11

We have tried to approach to the lowest attainable beam temperature with laser cooling of a 40-keV $$^{24}$$Mg$$^+$$ ion beam at a cooler storage ring S-LSR, which has a superperiodicity of six and is designed to be tough against resonant perturbation to the circulating beam. The capability of active indirect transverse laser cooling has been experimentally demonstrated with the use of the theoretically-proposed synchro-betatron resonance coupling scheme. For the reduction of beam heating due to intrabeam scattering, an additional scheme has been established to control the intensity of the circulating beam down to $$sim 10^4$$ ions by scraping the outskirt of the beam with the use of a horizontally-moving scraper, which could cool the horizontal and vertical beam temperature down to $$sim 20$$ K and $$sim 30$$ K, respectively, at an operation tune without horizontal-vertical (H-V) coupling. In the present paper, we would like to also present our recent results with H-V coupling in addition to longitudinal-horizontal coupling toward further reduction of the transverse beam temperature.

論文

Possible observation of transverse laser cooled ultimate cold ion beam in S-LSR

神保 光一*; 想田 光*; 百合 庸介; 頓宮 拓*; 中尾 政夫*; 白井 敏之*; 野田 章*

Proceedings of 25th North American Particle Accelerator Conference (NA-PAC '13) (Internet), p.886 - 888, 2013/09

The synchrotron-oscillation signals of 40-keV bunched Mg$$^+$$ ion beams were investigated for the diagnostics of the laser-cooled beams in an ion cooler storage ring, S-LSR, Kyoto University. The signals induced on a parallel-plate pickup were measured with a spectrum analyzer. The coherent and incoherent modes corresponding to the synchrotron tune were observed in the signals. The molecular dynamics simulation predicts, on the other hand, that the synchrotron oscillation of the strongly laser-cooled beam is suppressed by the space-charge force. We thus propose a possibility to detect the space-charge limit by the observation of the predicted suppression of the synchrotron oscillation.

論文

Efficiency enhancement of indirect transverse laser cooling with synchro-betatron resonant coupling by suppression of beam intensity

想田 光*; 中尾 政夫*; 頓宮 拓*; 神保 光一*; 大崎 一哉*; 岡本 宏巳*; 百合 庸介; He, Z.*; Grieser, M.*; 野田 章*

Japanese Journal of Applied Physics, 52(3), p.030202_1 - 030202_4, 2013/03

 被引用回数:5 パーセンタイル:22.9(Physics, Applied)

The efficiency of indirect transverse laser cooling of a heavy-ion beam using synchro-betatron resonant coupling (SBRC) was improved by the reduction of the beam intensity through scraping the tail part of the beam. In order to measure the beam size at low beam intensity, a new scheme was established where the beam profile was determined from the beam survival ratio by changing the insertion position of a beam scraper. At a beam intensity of $$10^4$$ particles in the ring, the transverse cooling time of the beam was reduced to 1.2 s, and horizontal and vertical minimum beam sizes were 0.2 mm and 0.6 mm, corresponding to the beam temperatures of 20 K and 29 K, respectively. The cooling time was much improved compared with that of our previous experiment, 100 s at $$10^7$$ particles (Nakao et al.). The transverse temperature was comparable to that in other work (Madsen et al.), in spite of the limitation in the experimental conditions such as low laser power and short laser-cooling section. This suggests that the present SBRC scheme has a potential capacity for attaining a lower-temperature beam or even Coulomb crystallization.

論文

Approach to the low temperature state oriented for crystalline beam

野田 章*; 中尾 政夫*; 想田 光*; 頓宮 拓*; 神保 光一*; 岡本 宏巳*; 大崎 一哉*; 百合 庸介; Meshkov, I.*; Smirnov, A.*; et al.

Proceedings of 23rd Russian Particle Accelerator Conference (RuPAC 2012) (Internet), p.48 - 52, 2012/09

Various approaches to attaining low-temperature beams have been continued in the cooler storage ring S-LSR at Kyoto University. One-dimensional ordering of electron-cooled 7-MeV protons was realized with an abrupt longitudinal temperature jump from 2 K to 0.3 K at a particle number of around 2000. Laser cooling has been applied to 40-keV $$^{24}$$Mg$$^+$$ beams toward the realization of crystalline beams. For a coasting beam, the lowest longitudinal temperature of 3.6 K was attained at $$4 times 10^4$$ ions. The temperature was limited due to intra-beam scattering (IBS). On the other hand, the transverse temperature of the beam indirectly cooled through IBS was saturated at 500 K for $$2 times 10^7$$ ions. In order to cool the transverse direction further, synchro-betatron resonance coupling has been applied to a bunched Mg beam. The transverse temperature has been reduced to the order of $$10^1$$ K at the beam intensity of $$10^4$$ ions by the reduction of the beam intensity using a scraper.

論文

スクレイパーを用いた横方向レーザー冷却効果の観測

想田 光*; 中尾 政夫*; 頓宮 拓*; 野田 章*; 神保 光一*; 大崎 一哉*; 岡本 宏巳*; 百合 庸介; Grieser, M.*; He, Z.*

Proceedings of 9th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.388 - 390, 2012/08

京都大学化学研究所のイオン蓄積・冷却リングS-LSRでは、シンクロ・ベータトロン共鳴によって重イオンビームの運動の進行方向と水平方向の振動を結合させ、レーザー冷却によって横方向を間接的に冷却する実験を進めている。冷却の過程において、粒子数が多い場合Intra-beam散乱による自己加熱作用によって冷却が阻害されるため、スクレイパーによってビーム外縁部の粒子を除去することによって冷却効率を高めている。このとき、2枚のスクレイパーを用い、1枚目のスクレイパーで粒子数を減らした後、2枚目のスクレイパーの挿入距離を変えてビームの残存率を測定することで、ビーム中心からの距離とその内側にある粒子の割合が得られ、この関係から冷却後のビームサイズを測定した。その結果、40keV $$^{24}$$Mg$$^+$$ビームについて、水平・鉛直ベータトロンチューン、及びシンクロトロンチューンがそれぞれ(2.074, 1.120, 0.072)、1枚目のスクレイパーをビーム中心から0.3mmまで挿入して粒子数を1$$times$$10$$^5$$まで減少させた条件で、水平方向ビームサイズが0.3mm、温度に換算して52Kまで冷却されていることを観測した。この時、ビームサイズが1/eになるまでの冷却時間は1.25秒であった。

論文

横方向間接レーザー冷却の効率化に向けた制御ビームスクレーピング

野田 章*; 中尾 政夫*; 想田 光*; 頓宮 拓*; 神保 光一*; 岡本 宏巳*; 大崎 一哉*; 百合 庸介; Grieser, M.*; He, Z.*

Proceedings of 9th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.72 - 74, 2012/08

Laser cooling of 40-keV Mg ion has been performed at S-LSR. Indirect transverse laser cooling of a bunched beam with the use of synchro-betatron resonance coupling (SBRC) has been experimentally indicated. However, it is not so efficient due to heating by intra-beam scattering for the ion number of 10$$^7$$. For attaining very low-temperature beam, it is inevitable to reduce the beam intensity without deterioration of beam detection signal. For this purpose, we have applied controlled scraping of a laser-cooled beam. After beam injection, the beam tail is cut off by a scraper moving in the horizontal direction and laser-cooled both in the longitudinal and horizontal directions with SBRC. Then, the horizontal beam size was measured with another scraper moving also in the horizontal direction. With this scheme, the beam intensity could be reduced from 10$$^7$$ to 10$$^5$$, which resulted in rather efficient indirect transverse laser cooling with the cooling time of about 1 sec.

論文

Observation of 2-component bunched beam signal with laser cooling

想田 光*; 中尾 政夫*; 野田 章*; 頓宮 拓*; 伊藤 清一*; 岡本 宏巳*; 百合 庸介; 神保 光一*; Grieser, M.*; He, Z.*

Proceedings of 3rd International Particle Accelerator Conference (IPAC '12) (Internet), p.397 - 399, 2012/05

The longitudinal temperature of 40 keV $$^{24}$$Mg$$^+$$ beams was measured through bunch length measurement during laser cooling at S-LSR. The bunch length was measured as time-domain signals from a pair of parallel-plate electrostatic pickups. Injected non-cooled beams gave a bunch length of 2.5 m and cooled beams had two components of broad and sharp distributions. The broad distribution had a longitudinal length of 2.2 m, which is close to that of the initial beam. The length of the sharp distribution shrunk to 0.25 m and is expected as a cooled part. The capture efficiency of cooling, which represents the ratio of particle numbers of the cooled part and the total particle number, varied with laser detuning. With a scanning range of 2 GHz, it was improved from 66% to 92%, while the bunch became longer by 10% with scanning. A new scheme for improving the capture efficiency will be applied to attain a strong signal from a low-current low-temperature beam.

28 件中 1件目~20件目を表示