検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 63 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Upgrade of the small-angle neutron scattering diffractometer SANS-J at JRR-3

熊田 高之; 元川 竜平; 大場 洋次郎; 中川 洋; 関根 由莉奈; Micheau, C.; 上田 祐生; 杉田 剛; 美留町 厚; 佐々木 未来; et al.

Journal of Applied Crystallography, 56(6), p.1776 - 1783, 2023/12

既存のメイン検出器および高位置分解能フォトマル検出器に加えて新規に導入した前面検出器を組み合わせることにより、波数0.002nm$$^{-1}$$から6nm$$^{-1}$$にわたる散乱を3つの光学機器配置により切れ目なく測定できるようになった。またグラフィカルユーザーインターフェースの導入と併せて装置のユーザビリティが大幅に向上した。

論文

Investigation of niobium surface roughness and hydrogen content with different polishing conditions for performance recovery of superconducting QWRs in JAEA Tokai-Tandem Accelerator

神谷 潤一郎; 仁井 啓介*; 株本 裕史; 近藤 恭弘; 田村 潤; 原田 寛之; 松井 泰; 松田 誠; 守屋 克洋; 井田 義明*; et al.

e-Journal of Surface Science and Nanotechnology (Internet), 21(4), p.344 - 349, 2023/05

原子力機構東海タンデム加速器には、40台の超伝導Quarter Wave Resonator(QWR)によって重イオンを10MeV/uまで加速するブースターリニアックがあるが、2011年の震災以降、運転を停止している。近年ウラン等のより重い核種を加速するため、タンデム加速器のアップグレードが精力的に検討され、QWR再稼働の必要性が高まっている。現在、運転時に必要な加速電圧とQ値を得るため、QWR内面荒さを低減するための電解研磨条件を検証している。一方で電解研磨はNb中水素を増加させ、水素病と呼ばれるQ値の減少を引き起こす可能性がある。真空中高温焼鈍で水素を放出させることで水素病を抑えることができるが、QWRのクラッド材を構成するNbとCuの熱膨張差による空洞破損の危険性がある。そのため表面粗さの低減とNbバルク中の水素の増加を最小限に抑えるため、研磨条件を最適化する必要がある。我々はこれまで水素吸蔵量および脱離機構を昇温脱離分析(TDS)により検証できることに着目し、研究を行ってきた。発表では異なる条件で研磨したNb材料のTDS結果、表面観察結果、表面粗さの相関について得られた成果を発表する。

論文

1/4波長型超伝導空洞の内面電解研磨の実施報告,2

仁井 啓介*; 井田 義明*; 上田 英貴*; 山口 隆宣*; 株本 裕史; 神谷 潤一郎; 近藤 恭弘; 田村 潤; 原田 寛之; 松井 泰; et al.

Proceedings of 19th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.601 - 604, 2023/01

マルイ鍍金工業では、日本原子力研究開発機構(JAEA)と共同で東海タンデム加速器後段の超伝導ブースター用1/4波長型超伝導空洞(QWR)について再表面処理の検討を行っている。この空洞はニオブ-銅のクラッド板で製作されており、底部に大きな開口があるため、再度の電解研磨処理等が可能な構造になっている。再表面処理では、内面ニオブに電解研磨(EP)を施工して表面粗さを小さくし、高い加速電界(5MV/m以上)を発生できるようにすることを目標としている。2020年度には、マルイ鍍金工業がニオブ9セル空洞EPの経験で得た各種パラメータとJAEA所有の電極、治具等を組み合わせて、予備の空洞に対してEPを施工した。しかし、EP後のニオブ表面は光沢が増すものの表面粗さが良好な状態とはならず、加速電界もEP前よりは改善したが、目標値には達していなかった。2021年度には空洞のニオブ表面粗さと加速電界の改善を目指して、EPのパラメータ(電極面積,電圧,流量と揺動)を変えての実験を行い、設備,条件,表面粗さ等の評価を行った。また、今回はこれまでに観察してこなかった中心導体のドリフトチューブ部内面などについても広く観察を行ったので、そちらの結果も併せて報告する。

論文

1/4波長型超伝導空洞の内面電解研磨の実施報告

仁井 啓介*; 井田 義明*; 上田 英貴*; 山口 隆宣*; 株本 裕史; 神谷 潤一郎; 近藤 恭弘; 田村 潤; 原田 寛之; 松井 泰; et al.

Proceedings of 18th Annual Meeting of Particle Accelerator Society of Japan (インターネット), p.334 - 337, 2021/10

原子力機構の東海タンデム加速器では重イオンビームを用いた核物理・核化学・材料照射などの研究が行われている。タンデム後段にはビームのエネルギーを2-3倍に増加させるための超伝導ブースターが設置されているが、長期間の休止中となっている。この超伝導ブースターの仕様は、型式=同軸1/4波長型共振器(QWR)、最適ビーム速度=光速の10%、加速電界=5.0MV/m@4Wである。現在、再稼働に向けた取り組みを行っており、各種試験を行う準備として予備の超伝導空洞の電解研磨を検討している。この空洞はニオブ-銅のクラッド板で製作されており、底部に大きな開口があるため、再度の電解研磨処理が可能な構造となっている。今回、マルイ鍍金工業と日本原子力研究開発機構が共同で1/4波長型超伝導空洞内面電解研磨について設備や条件の検討、電解研磨の実施、研磨後表面や空洞性能の評価等を行ったので、その結果を報告する。

論文

Benchmark analysis by Beremin model and GTN model in CAF subcommittee

廣田 貴俊*; 名越 康人*; 北条 公伸*; 岡田 裕*; 高橋 昭如*; 勝山 仁哉; 上田 貴志*; 小川 琢矢*; 八代醍 健志*; 大畑 充*; et al.

Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07

In order to establish a guideline for fracture evaluation by considering plastic constraint in the ductile-brittle transition temperature (DBTT) region, the CAF (Constraint-Based Assessment of Fracture in Ductile-Brittle Transition Temperature Region) subcommittee has been launched in 2018 in the Japan Welding Engineering Society. In the committee, fracture tests are conducted using C(T), SE(B), and 50mm-thick flat plate with a surface flaw subjected to bending load or tensile load to verify fracture evaluation methods. Since simulation results are easily affected by analysis conditions, benchmark analysis is essential for the potential users of the guideline. Therefore, benchmark analyses are executed on brittle and ductile damages by Beremin and Gurson-Tvergaard-Needleman (GTN) models implemented in the finite element (FE) codes. The benchmark analyses are carried out in four steps; Step 0 is to confirm the output of FE codes in each member with the same input data and the same FE model. Step 1 is to confirm the result of Weibull stress analysis for C(T) specimens tested at -125$$^{circ}$$C. The Weibull parameter, m, was fixed in this step. At step 2, sensitivity analyses are conducted on Weibull stresses in different conditions. The outputs by the GTN model are also confirmed. At the final step, the fracture simulation will be run for flat plate specimens with less plastic constraint than the standard fracture toughness specimen. As the results of the benchmark analyses up to step 2, a significant difference is not observed in the Weibull stress computed by committee members with the same input data and FE model and it is confirmed that the effects of element type, nonlinear deformation theory employed in FE analysis. For the calculation of the Weibull parameter m by using the fracture toughness test results and the developed programs by committee members, the converged values of m show good agreement among them.

論文

Emergent spin-1 Haldane gap and ferroelectricity in a frustrated spin-$$frac{1}{2}$$ ladder

上田 宏*; 小野田 繁樹*; 山口 泰弘*; 木村 剛*; 吉澤 大智*; 森岡 俊晶*; 萩原 政幸*; 萩原 雅人*; 左右田 稔*; 益田 隆嗣*; et al.

Physical Review B, 101(14), p.140408_1 - 140408_6, 2020/04

 被引用回数:3 パーセンタイル:27.19(Materials Science, Multidisciplinary)

We report experimental and theoretical evidence that Rb$$_2$$Cu$$_2$$Mo$$_3$$O$$_{12}$$ has a nonmagnetic tetramer ground state of a two-leg ladder comprising antiferromagnetically coupled frustrated spin-$$frac{1}{2}$$ chains and exhibits a Haldane spin gap of emergent spin-1 pairs. Three spin excitations split from the spin-1 triplet by a Dzyaloshinskii-Moriya interaction are identified in inelastic neutron-scattering and electron spin resonance spectra. A tiny magnetic field generates ferroelectricity without closing the spin gap, indicating a unique class of ferroelectricity induced by a vector spin chirality order.

報告書

水環境調整設備の調整運転

馬籠 博克; 岡田 祐次; 冨田 健司; 飯田 一広; 安藤 均; 米川 昭久; 上田 晴康; 塙 博; 菅野 勝; 作田 善幸

JAEA-Technology 2015-025, 100 Pages, 2015/09

JAEA-Technology-2015-025.pdf:78.32MB

日本原子力研究開発機構では、軽水炉利用の高度化及び高経年化に対応するため、軽水炉燃料及び材料の照射試験を実施する準備を進めている。JMTRは第165運転サイクル後の2006年8月に停止し、再稼働に向けて照射施設の整備を進めており、燃料及び材料の中性子照射試験を行うための燃料異常過渡試験装置及び材料照射試験装置を2008年度から2012年度にかけて製作、設置した。材料照射試験装置は、IASCC(照射誘起応力腐食割れ: Irradiation Assisted Stress Corrosion Cracking)研究に供するものであり、主として3基の水環境調整設備で構成されている。本報告書は、水環境調整設備の性能確認を目的として、2013年度に実施した調整運転についてまとめたものである。

論文

Genome analysis of high ethyl caproate producing sake yeasts generated by ion beam breeding

増渕 隆*; 日向 弘和*; 上田 涼史郎; 林 秀謙*; 池永 裕*; 佐藤 勝也; 大野 豊

JAEA-Review 2014-050, JAEA Takasaki Annual Report 2013, P. 123, 2015/03

We analyzed genome sequence of the high ethyl caproate producing sake yeast mutant (No.227) generated by ion beam breeding in order to investigated factors contributing the reduced ability to alcohol fermentation. In the high ethyl caproate producing sake yeast, four pyruvate decarboxylase genes (PDC), six alcohol dehydrogenase genes (ADH), two biotin synthesis genes (BIO) and chitinase gene (CTS1) might be involved in the reduced ability to alcohol fermentation. The genome sequence of the strain No.227 was determined by a whole-genome shotgun strategy using pyrosequencing method and compared with the whole-genome sequence of the sake yeast strain Kyokai 7, which is characterized by the fermentation property, as a reference sequence. For the PDC, ADH, BIO and CTS1 loci, no mutation was found in the strain No.227, suggesting that these genes did not involved in the reduced ability to alcohol fermentation.

報告書

軽水炉照射環境下におけるIASCC研究のための水環境調整設備の整備,2

馬籠 博克; 岡田 祐次; 塙 博; 作田 善幸; 菅野 勝; 飯田 一広; 安藤 均; 米川 昭久; 上田 晴康; 柴田 光敦

JAEA-Technology 2014-023, 267 Pages, 2014/07

JAEA-Technology-2014-023-01.pdf:103.68MB
JAEA-Technology-2014-023-02.pdf:71.92MB

日本原子力研究開発機構では、軽水炉利用の高度化及び高経年化に対応するため、軽水炉燃料及び材料の照射試験を実施する準備を進めている。JMTRは第165運転サイクル後の2006年8月に停止し、再稼働に向けて照射施設の整備を進めており、燃料・材料の中性子照射試験を行うための燃料異常過渡試験装置及び材料照射試験装置を2008年度から2012年度の間に製作、設置した。本報告書は、先に報告したJAEA-Technology 2013-019「軽水炉照射環境下におけるIASCC研究のための水環境調整設備の整備(1)」(2008年度から2010年度までの整備報告)の続報で、2011年度から2012年度までに実施したIASCC(照射誘起応力腐食割れ: Irradiation Assisted Stress Corrosion Cracking)研究のための材料照射試験装置の水環境調整設備等の整備についてまとめたものである。

論文

Mutation analysis of high ethyl caproate producing sake yeasts generated by ion beam breeding

増淵 隆*; 上田 涼史郎; 上山 修*; 池永 裕*; 佐藤 勝也; 鳴海 一成*

JAEA-Review 2013-059, JAEA Takasaki Annual Report 2012, P. 117, 2014/03

We have previously obtained high ethyl caproate producing Sake yeasts "No.227" and "No.1333" by ion beam breeding. The fatty acid synthase genes (${it FAS1}$ and ${it FAS2}$) and the fatty acid esterase genes (${it EHT1}$ and ${it EEB1}$) might be involved in the higher production of ethyl caproate in the mutant strains. In this study, to identify the mutation sites of the mutant strains, each gene locus was sequenced. For the ${it EHT1}$, ${it EEB1}$ and ${it FAS1}$ loci, all the mutations found in mutant strains are nonsense mutations, suggesting that these mutations did not involved in the higher production of ethyl caproate. On the other hand, strains No.227 and No.1333 carried G/A and A/A mutations in ${it FAS2}$ gene at nucleotide position 3,748 as heterozygous and homozygous states, respectively. This result strongly suggested that the higher production of ethyl caproate in strains No.227 and No.1333 is attributed to a dominant mutation in ${it FAS2}$ gene.

報告書

放射線管理区域における作業安全のための管理システムの開発(共同研究)

檜山 和久; 塙 信広; 黒澤 昭彦; 江口 祥平; 堀 直彦; 楠 剛; 植田 久男; 島田 浩; 神田 博明*; 齊藤 勇*

JAEA-Technology 2013-045, 32 Pages, 2014/02

JAEA-Technology-2013-045.pdf:5.83MB

本報告書は、炉室内で作業する者の入域管理と被ばく管理を同時に行い、さらに、炉室内での位置情報と作業員が倒れていないか等の情報を取得できるリアルタイム多機能入域管理システムの開発についてまとめたものである。

報告書

軽水炉照射環境下におけるIASCC研究のための水環境調整設備の整備,1

岡田 祐次; 馬籠 博克; 塙 博; 近江 正男; 菅野 勝; 飯田 一広; 安藤 均; 柴田 光敦; 米川 昭久; 上田 晴康

JAEA-Technology 2013-019, 236 Pages, 2013/10

JAEA-Technology-2013-019.pdf:45.07MB

日本原子力研究開発機構では、軽水炉利用の高度化及び高経年化に対応するため、軽水炉燃料及び材料の照射試験を実施する準備を進めている。JMTRは第165運転サイクル後の2006年8月に停止し、再稼働に向けて照射施設の整備を進めており、燃料・材料の中性子照射試験を行うための燃料異常過渡試験装置及び材料照射試験装置を2008年度から2012年度の間に製作、設置する予定である。本報告書は、2008年度から2010年度までに実施した照射誘起応力腐食割れ(IASCC: Irradiation Assisted Stress Corrosion)研究のための材料照射試験装置の水環境調整設備等の整備についてまとめたものである。

論文

Selective vibrational excitation in the resonant Auger decay following core-to-$$pi^*$$ transitions in N$$_2$$O

Travnikova, O.*; C$'e$olin, D.*; Bao, Z.*; B${o}$rve, K. J.*; 田中 隆宏*; 星野 正光*; 加藤 秀樹*; 田中 大*; Harries, J.; 為則 祐介*; et al.

Journal of Electron Spectroscopy and Related Phenomena, 181(2-3), p.129 - 134, 2010/08

 被引用回数:1 パーセンタイル:7.38(Spectroscopy)

本論文ではN$$_2$$OのN-ターミナル、N-セントラルとOのコアー$$pi^*$$励起に伴うオージェ崩壊後の終状態震度状態分布についてのスタディーを報告する。励起光のエネルギーをみつの共鳴のある領域をスキャンするとベンド:ストレッチの振動分布がかわることを証明する。これがコア励起状態においてRenner-Tellerスプリットによる効果だということが知られているが、非対称ストレッチ励起がおもにN-ターミナルの1s-$$pi^*$$励起後の崩壊に伴うものであることを証明した。この選択性についてはそれぞれの電子状態のポテンシャルエネルギーサーフェスを比較して議論する。

論文

次世代超電導サイクロトロンの開発

石山 敦士*; 植田 浩史*; 福田 光宏*; 畑中 吉治*; 宮原 信幸*; 横田 渉; 鹿島 直二*; 長屋 重夫*

電気学会研究会資料,超電導応用電力機器研究会(ASC-10-33), p.83 - 88, 2010/06

陽子線や重粒子線(炭素線)によるがん治療は、高齢者や難治がんに有効であることがその実績から明らかになっている。このため粒子線によるがん治療のさらなる普及が望まれているが、主要装置である加速器が大型で建設費や運転費が高額であることが普及の障害となっている。本発表では、小型化,省電力化が可能なことから次世代型がん治療用加速器として有望な超電導サイクロトロンの開発の概要を報告する。

論文

Recent progress in the energy recovery linac project in Japan

坂中 章悟*; 明本 光生*; 青戸 智浩*; 荒川 大*; 浅岡 聖二*; 榎本 収志*; 福田 茂樹*; 古川 和朗*; 古屋 貴章*; 芳賀 開一*; et al.

Proceedings of 1st International Particle Accelerator Conference (IPAC '10) (Internet), p.2338 - 2340, 2010/05

日本においてERL型放射光源を共同研究チームで提案している。電子銃,超伝導加速空洞などの要素技術開発を進めている。また、ERL技術の実証のためのコンパクトERLの建設も進めている。これら日本におけるERL技術開発の現状について報告する。

論文

Effect of water distributions on performances of JARI standard PEFC by using neutron radiography

村川 英樹*; 植田 忠伸*; 吉田 壮寿*; 杉本 勝美*; 浅野 等*; 竹中 信幸*; 持木 幸一*; 飯倉 寛; 安田 良; 松林 政仁

Nuclear Instruments and Methods in Physics Research A, 605(1-2), p.127 - 130, 2009/06

 被引用回数:23 パーセンタイル:81.44(Instruments & Instrumentation)

In order to clarify the effects of water on performances of a Polymer Electrolyte Fuel Cell (PEFC), measurements of water distribution in a Japan Automobile Research Institute standard PEFC were carried out by means of neutron radiography. Furthermore, the cell voltage and the pressure drop between inlet and outlet of the air were simultaneously measured. From the measurements, the relation between cell voltage, pressure drop and movement of the water plug in the channel was confirmed. The PEFC performances were recovered as the water plug evacuated. Condensed water in the channel decreased with the relative humidity of air. However, it may affect the MEA permanence. Therefore, the most appropriate operating conditions should be decided for taking into account both the cell performances and the permanencies.

論文

Interatomic Coulombic decay following the Auger decay; Experimental evidence in rare-gas dimers

上田 潔*; 福沢 宏宣*; Liu, X.*; 酒井 克典*; Pr$"u$mper, G.*; 森下 雄一郎*; 齋藤 則生*; 鈴木 功*; 永谷 清信*; 岩山 洋士*; et al.

Journal of Electron Spectroscopy and Related Phenomena, 166-167, p.3 - 10, 2008/11

 被引用回数:23 パーセンタイル:72.45(Spectroscopy)

電子・イオン・イオン同時測定分光法を利用してAr2p又はKr3dのオージェ崩壊に伴うAr$$_2$$, ArKr、及びKr$$_2$$の原子間クーロン崩壊(ICD)を測定した。この逐次崩壊によってクーロン解離を通して二価のイオンと一価のイオンが生成する。ICD電子の運動エネルギーと両方の原子イオンの運動エネルギーの同時測定によって、ICDの崩壊過程を解明できた。一重項もしくは3重項の二価電子状態が崩壊して、そのエネルギーをとなりの原子に移すと「スピン保存」ICDが「スピン・フリップ」ICDよりレートが早いことがわかった。

論文

Photoabsorption spectra of CF$$_3$$I and thermally dissociated CF$$_3$$I near the C 1s, I 3d and F 1s ionisation thresholds

田中 隆宏*; 星野 正光*; 加藤 秀樹*; Harries, J.; 為則 雄祐*; 上田 潔*; 田中 大*

Journal of Electron Spectroscopy and Related Phenomena, 164(1-3), p.24 - 27, 2008/07

 被引用回数:4 パーセンタイル:24.57(Spectroscopy)

Cの1s, Iの3d、それからFの1sイオン化端付近のX線励起による全イオン収率及び角度分解イオン収率を紹介し、スペクトルに現れるそれぞれの電子状態を推定する。イオン収率の異方性はC 1s$$rightarrowsigma^*_{C-I}$$の遷移のみに現れ、この遷移の双極子モーメントがC$$_{3v}$$と平行になっていることを示す。CF$$_3$$Iのサンプルを800Kまで加熱し、この条件で測定したスペクトルと室温のスペクトルを比較して初めてCF$$_3$$の内殻励起過程について情報が得られた。

論文

数値シミュレーションによるNb$$_{3}$$Sn素線の波状曲げ変形時の超電導特性の評価

村上 陽之*; 植田 浩史*; 石山 敦士*; 小泉 徳潔; 奥野 清

電気学会論文誌,B, 128(6), p.853 - 859, 2008/06

ITER-EDAの中で開発されたNb$$_{3}$$Snモデル・コイル導体で、電磁力によって素線が波状に曲げ変形し、臨界電流性能が劣化する現象が観測された。素線の曲げ変形による臨界電流性能の劣化機構を解明するために、数値解析コードを開発した。解析結果は、単一素線の波状曲げ変形試験結果とよく一致し、コードの妥当性を示すことができた。さらに、素線に加わる横荷重のピッチ,温度,銅の汚染防止用のタンタル・バリアの厚さ,ブロンズのRRRなどをパラメータとして計算を行い、荷重のピッチを短くすること、及びタンタル・バリアの厚さを厚くすることが劣化を防止するために有効であることを示した。

論文

Numerical simulation of critical current degradation of Nb$$_{3}$$Sn strand in CIC conductor

村上 陽之*; 石山 敦士*; 植田 浩史*; 小泉 徳潔; 奥野 清

IEEE Transactions on Applied Superconductivity, 18(2), p.1051 - 1054, 2008/06

 被引用回数:2 パーセンタイル:20.21(Engineering, Electrical & Electronic)

大型超伝導導体では、電磁力による素線の波状変形によって臨界電流性能が劣化する。この機構を解明するために、解析コードを開発した。しかし、解析結果は、単一素線に波状変形を加えた実験結果を精度よく模擬することができなかった。そこで、素線の弾塑性変形を考慮し、加えてフィラメント間のコンダクタンスの詳細評価を実施した。この結果、解析の精度を改善することができた。そこで、改良したコードを用いて、臨界電流値のバリア厚さ,ブロンズのRRR、及びツイスト・ピッチの依存性を評価した。その結果、バリア厚さを厚くすることで劣化を低減できること,ブロンズのRRR,ツイスト・ピッチは影響が小さいことがわかった。

63 件中 1件目~20件目を表示