検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 94 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

The BCC $$rightarrow$$ FCC hierarchical martensite transformation under dynamic impact in FeMnAlNiTi alloy

Li, C.*; Fang, W.*; Yu, H. Y.*; Peng, T.*; Yao, Z. T.*; Liu, W. G.*; Zhang, X.*; 徐 平光; Yin, F.*

Materials Science & Engineering A, 892, p.146096_1 - 146096_11, 2024/02

 被引用回数:0 パーセンタイル:0.04(Nanoscience & Nanotechnology)

The quasi-static superelastic responses and hierarchical martensite transformation from body-centered cubic (BCC) to face-centered cubic (FCC) under dynamic impact in Fe$$_{42}$$Mn$$_{34}$$Al$$_{15}$$Ni$$_{7.5}$$Ti$$_{1.5}$$ alloys were investigated. Polycrystalline and oligocrystalline alloys were produced through solution heat treatment and cyclic heat treatment processes, respectively. The results show the volume fraction of residual martensite for oligocrystalline alloys is lower, which exhibits better superelastic responses compared with polycrystalline alloys. Dynamic impact tests indicate that, despite the weakening of the grain boundary strengthening effect, the ultimate strength of the oligocrystalline alloys closely matches that of the polycrystalline alloys under dynamic impact. The martensite transformation of the FeMnAlNiTi alloy is characterized as hierarchical under dynamic impact, and increasing strain rates and grain sizes can enhance the BCC $$rightarrow$$ FCC martensite transformation, resulting in higher martensite phase fractions for oligocrystalline alloys. The increase in ultimate strength is attributed to the dynamic Hall-Petch effect introduced by more martensite phase interfaces under dynamic impact.

論文

Gradient residual strain measurement procedure in surface impacted railway steel axles by using neutron scattering

Zhou, L.*; Zhang, H.*; Qin, T. Y.*; Hu, F. F.*; 徐 平光; Ao, N.*; Su, Y. H.; He, L. H.*; Li, X. H.*; Zhang, J. R.*; et al.

Metallurgical and Materials Transactions A, 11 Pages, 2024/00

 被引用回数:0

High-speed railway S38C axles undergo surface induction hardening for durability, but are susceptible to fatigue cracks from foreign object impact. The neutron diffraction method was employed to measure the residual strain in S38C axles, obtaining microscopic lattice distortion data, for the gradient layer at a depth of 8 mm under the surface. The results showed that after induction-hardening, the microscopic lattice distortion had a gradient distribution, decreasing with the distance from the surface. However, in the case of impacting speed of 600 km/m, the average microscopic lattice distortion increased with the distance from the surface, reaching a maximum augmentation of 55 pct. These findings indicate a strong experimental basis, and improve our understanding of the relationship between macroscopic residual stress and decision-making, in regard to operation and maintenance.

論文

Electromagnetic moments of the antimony isotopes $$^{112-133}$$Sb

Lechner, S.*; 宮城 宇志*; Xu, Z. Y.*; Bissell, M. L.*; Blaum, K.*; Cheal, B.*; Devlin, C. S.*; Garcia Ruiz, R. F.*; Ginges, J. S. M.*; Heylen, H.*; et al.

Physics Letters B, 847, p.138278_1 - 138278_9, 2023/12

 被引用回数:0 パーセンタイル:0.02(Astronomy & Astrophysics)

不安定核を含むアンチモン同位体$$^{112-133}$$Sbの磁気モーメントと電気的四重極モーメントをレーザー分光を用いて測定した。現象論的な相互作用と有効演算子を用いた殻模型計算によって測定値をよく再現することができた。第一原理に基づいたVS-IMSRG法による殻模型計算では、磁気モーメントは現象論的な有効演算子を用いればよく実験値を再現するものの、電気的四重極モーメントについては有効電荷を用いても現象論的な相互作用を用いた計算ほどには実験値を再現することができなかった。

論文

Cryogenic impact fracture behavior of a high-Mn austenitic steel using electron backscatter diffraction and neutron Bragg-edge transmission imaging

Wang, Y. W.*; Wang, H. H.*; Su, Y. H.; 徐 平光; 篠原 武尚

Materials Science & Engineering A, 887, p.145768_1 - 145768_13, 2023/11

 被引用回数:1 パーセンタイル:54.26(Nanoscience & Nanotechnology)

A unique impact fracture behavior is found in a high-Mn austenitic steel (24Mn-4Cr-0.4C-0.3Cu) in this work. The steel exhibits concurrent twinning-induced plasticity (TWIP) effect and the transformation-induced plasticity (TRIP) effect. By analyzing the load-deflection curves recorded during Charpy impact testing, the resistance to crack initiation and propagation is quantified from the absorbed energy. The high-Mn steel demonstrates good resistance to crack initiation at 273 K and 77 K. However, as the temperature decreases from 273 K to 77 K, there is an accelerated transition from stable crack growth to unstable crack growth during impact, resulting in the deterioration of resistance to crack propagation. The plastic deformation of the impact-tested samples, especially in the region close to the crack-path profile was quantitatively analyzed using neutron Bragg-edge transmission (BET) imaging. The deformation zones, divided by using the width of the 200 Bragg edge, exhibit good agreement with the impact absorbed energy characteristics obtained from dynamic load-deflection curves. Moreover, the unstable growth transition point was roughly determined on the impact-tested sample. Then, the electron backscatter diffraction (EBSD) technique is employed to examine the deformation microstructure along the crack-path in the impact-tested samples. The results revealed the dual roles of TRIP effect in impact toughness of the high-Mn steel. On one hand, the TRIP effect plays a positive role in improving resistance to crack initiation and propagation. On the other hand, the excessive accumulation of brittle $$varepsilon$$/$$alpha$$'-martensite caused by the enhanced TRIP effect at 77 K leads to quasi-cleavage fracture, thereby playing a negative role. Finally, we discussed the prominent toughening mechanisms associated with the TWIP and TRIP effects, which greatly impact the impact fracture behavior.

論文

PANDORA Project for the study of photonuclear reactions below $$A=60$$

民井 淳*; Pellegri, L.*; S$"o$derstr$"o$m, P.-A.*; Allard, D.*; Goriely, S.*; 稲倉 恒法*; Khan, E.*; 木戸 英治*; 木村 真明*; Litvinova, E.*; et al.

European Physical Journal A, 59(9), p.208_1 - 208_21, 2023/09

 被引用回数:1 パーセンタイル:0.02(Physics, Nuclear)

光核反応は原子核構造の観点からも応用の観点からも重要であるにも関わらず、その反応断面積は未だに不定性が大きい。近年、超高エネルギー宇宙線の起源を探るために、鉄よりも軽い原子核の光核反応断面積を正確に知る必要が指摘されている。この状況を打破するため、原子核物理の実験、理論、宇宙物理の共同研究となるPANDORAプロジェクトが始まった。本論文はその計画の概要をまとめたものである。原子核実験ではRCNP、iThembaによる仮想光子実験とELI-NPによる実光子実験などが計画されている。原子核理論では、乱雑位相近似計算、相対論的平均場理論、反対称化分子動力学、大規模殻模型計算などが計画されている。これらで得られた信頼性の高い光核反応データベースと宇宙線伝搬コードを組み合わせ、超高エネルギー宇宙線の起源の解明に挑む。

論文

Level structures of $$^{56,58}$$Ca cast doubt on a doubly magic $$^{60}$$Ca

Chen, S.*; Browne, F.*; Doornenbal, P.*; Lee, J.*; Obertelli, A.*; 角田 佑介*; 大塚 孝治*; 茶園 亮樹*; Hagen, G.*; Holt, J. D.*; et al.

Physics Letters B, 843, p.138025_1 - 138025_7, 2023/08

 被引用回数:1 パーセンタイル:0.02(Astronomy & Astrophysics)

$$^{57,59}$$Scからの1陽子ノックアウト反応を用いて、$$^{56}$$Caと$$^{58}$$Caのガンマ崩壊を観測した。$$^{56}$$Caでは1456(12)keVの$$gamma$$線遷移が、$$^{58}$$Caでは1115(34)keVの遷移が観測された。どちらの遷移も暫定的に$$2^{+}_{1} rightarrow 0^{+}_{gs}$$と割り当てられた。有効核子間相互作用をわずかに修正した広い模型空間での殻模型計算では、$$2^{+}_{1}$$準位エネルギー、2中性子分離エネルギー、反応断面積が実験とよく一致し、N=34閉殻の上に新しい殻が形成されていることを裏付けた。その構成要素である$$0_{f5/2}$$$$0_{g9/2}$$軌道はほぼ縮退しており、これは$$^{60}$$Caが二重魔法核である可能性を排除し、Ca同位体のドリップラインを$$^{70}$$Caあるいはそれ以上にまで広げる可能性がある。

論文

Multiple mechanisms in proton-induced nucleon removal at $$sim$$100 MeV/nucleon

Pohl, T.*; Sun, Y. L.*; Obertelli, A.*; Lee, J.*; G$'o$mez-Ramos, M.*; 緒方 一介*; 吉田 数貴; Cai, B. S.*; Yuan, C. X.*; Brown, B. A.*; et al.

Physical Review Letters, 130(17), p.172501_1 - 172501_8, 2023/04

 被引用回数:5 パーセンタイル:92.42(Physics, Multidisciplinary)

大きなフェルミ面非対称性を持つ陽子過剰な$$^{14}$$O原子核からの100MeV/nucleonでの陽子による陽子・中性子除去反応について報告した。この結果は、quasi-freeノックアウト反応、非弾性散乱、核子移行反応を含む複数の反応機構の定量的寄与を初めて示すものである。このようなエネルギー領域では通常無視される非弾性散乱と核子移行の寄与が、弱束縛陽子と強束縛中性子の除去反応断面積にそれぞれ約50%と30%寄与していることが示された。

論文

Corrosion fatigue crack growth behavior of a structurally gradient steel for high-speed railway axles

Ao, N.*; Zhang, H.*; Xu, H. H.*; Wu, S. C.*; Liu, D.*; 徐 平光; Su, Y. H.; Kang, Q. H.*; Kang, G. Z.*

Engineering Fracture Mechanics, 281, p.109166_1 - 109166_14, 2023/03

 被引用回数:4 パーセンタイル:85.05(Mechanics)

Considering the complex service environments that high-speed railway axles are subjected to, the fatigue crack growth (FCG) behavior of a structurally gradient axle steel with different pre-crack depths both in air and corrosive medium was investigated at a frequency of 5 Hz. The results indicated that in the high $$Delta$$$$K$$ region, FCG rate was dramatically accelerated by corrosion, but the gap narrows as $$Delta$$$$K$$ decreased. The accelerated corrosion FCG rate was a comprehensive result of the acceleration effect of the anodic dissolution, hydrogen-enhanced localized plasticity and the retardation effect of corrosion-induced crack-tip blunting. Despite the fact that the corrosion resistance gradually decreased as the pre-crack depth increased, the FCG rate in the corrosive medium gradually decreased. This was because fatigue loading played a more important role than corrosion in accelerating the corrosion FCG rate.

論文

A Colossal barocaloric effect induced by the creation of a high-pressure phase

Jiang, X.*; 服部 高典; Xu, X.*; Li, M.*; Yu, C.*; Yu, D.*; Mole, R.*; 矢野 真一郎*; Chen, J.*; He, L.*; et al.

Materials Horizons, 10(3), p.977 - 982, 2023/03

 被引用回数:5 パーセンタイル:87.86(Chemistry, Multidisciplinary)

現在の蒸気圧縮式冷凍機に代わる環境に優しい冷凍機として、バロカロリック効果に基づく固体冷凍機が世界的に注目されている。一般に、バロカロリック効果が発現する相はいずれも常圧でも存在する。ここでは、それらの物質と違って、KPF$$_{6}$$が高圧の菱面体晶相を生成することにより、巨大なバロカロリック効果を示すことを実証した。相図は、圧力依存の熱量測定、ラマン散乱測定、中性子回折測定に基づいて構築されたものである。本研究は、巨大バロカロリー効果に、高圧相の生成という新たな手法をもたらすと期待される。

論文

Fatigue crack non-propagation behavior of a gradient steel structure from induction hardened railway axles

Zhang, H.*; Wu, S. C.*; Ao, N.*; Zhang, J. W.*; Li, H.*; Zhou, L.*; 徐 平光; Su, Y. H.

International Journal of Fatigue, 166, p.107296_1 - 107296_11, 2023/01

 被引用回数:4 パーセンタイル:61.91(Engineering, Mechanical)

Abnormal damages in railway axles can lead to a significant hazard to running safety and reliability. To this end, a surface treatment was selected to effectively inhibit fatigue crack initiation and growth. In this study, a single edge notch bending fatigue test campaign with artificial notches was conducted to elucidate the fatigue crack non-propagation behavior in railway S38C axles subjected to an induction hardening process. The fatigue cracking behavior in the gradient structure was revealed by optical microscopy, electron backscatter diffraction, and fractography. The microhardness distribution was measured using a Vickers tester. The obtained results show that the microhardness of the strengthening layer is nearly triple that of the matrix. Owing to the gradient microstructures and hardness, as well as compressive residual stress, the fatigue long crack propagates faster once it passes through the hardened zone (approximately 2.0 mm in the radial depth). Thereafter, local retarding (including deflection, branching, and blunting) of the long crack occurs because of the relatively coarse ferrite and pearlite in the transition region and matrix. Totally, this fatigue cracking resistance is reasonably believed to be due to the gradient microstructure and residual stress. These findings help to tailor a suitable detection strategy for maximum defects or cracks in railway axles.

論文

"Southwestern" boundary of the $$N = 40$$ island of inversion; First study of low-lying bound excited states in $$^{59}$$V and $$^{61}$$V

Elekes, Z.*; Juh$'a$sz, M. M.*; Sohler, D.*; Sieja, K.*; 吉田 数貴; 緒方 一介*; Doornenbal, P.*; Obertelli, A.*; Achouri, N. L.*; 馬場 秀忠*; et al.

Physical Review C, 106(6), p.064321_1 - 064321_10, 2022/12

 被引用回数:2 パーセンタイル:0.02(Physics, Nuclear)

$$^{59}$$Vと$$^{61}$$Vの低励起準位構造を初めて探索した。$$^{61}$$Vについては中性子ノックアウト反応と陽子非弾性散乱が、$$^{59}$$Vについては中性子ノックアウト反応データが得られた。$$^{59}$$Vについては4つ、$$^{61}$$Vについては5つの新たな遷移が確認された。Lenzi-Nowacki-Poves-Sieja (LNPS)相互作用に基づく殻模型計算との比較によって、それぞれの同位体について確認されたガンマ線のうち3つが、first 11/2$$^{-}$$状態とfirst 9/2$$^{-}$$状態からの崩壊と決定された。$$^{61}$$Vについては、($$p$$,$$p'$$)非弾性散乱断面積は四重極変形と十六重極変形を想定したチャネル結合法により解析されたが、十六重極変形の影響により、明確に反転の島に属するとは決定できなかった。

論文

Extended $$p_{3/2}$$ neutron orbital and the $$N = 32$$ shell closure in $$^{52}$$Ca

Enciu, M.*; Liu, H. N.*; Obertelli, A.*; Doornenbal, P.*; Nowacki, F.*; 緒方 一介*; Poves, A.*; 吉田 数貴; Achouri, N. L.*; 馬場 秀忠*; et al.

Physical Review Letters, 129(26), p.262501_1 - 262501_7, 2022/12

 被引用回数:4 パーセンタイル:46.35(Physics, Multidisciplinary)

$$sim$$230MeV/nucleonでの$$^{52}$$Caからの中性子ノックアウト反応が$$gamma$$線分光と行われ、$$1f_{7/2}$$$$2p_{3/2}$$軌道からの中性子ノックアウト反応の運動量分布が測定された。断面積は$$N=32$$の閉殻と整合し、Ca同位体での$$N=28$$$$N=34$$閉殻と同程度に強い閉殻であることが確認された。運動量分布の分析から$$1_{f7/2}$$$$2p_{3/2}$$軌道の平均二乗根半径の差は0.61(23)fmと決定され、これはmodified-shell-modelによる予言の0.7fmと整合した。これは、中性子過剰なCa同位体での$$2p_{3/2}$$軌道半径が大きいことが、中性子数にしたがって線形的に荷電半径が増える意外な現象の原因であることを示唆している。

論文

Tough yet flexible superelastic alloys meet biomedical needs

Xu, X.*; 大平 拓実*; Xu, S.*; 平田 研二*; 大森 俊洋*; 植木 洸輔*; 上田 恭介*; 成島 尚之*; 長迫 実*; 貝沼 亮介*; et al.

Advanced Materials & Processes, 180(7), p.35 - 37, 2022/10

Metallic biomaterials are widely used to replace or support failing hard tissues due to excellent mechanical properties and high wear resistance, with demand increasing as the global population continues to age. It is widely accepted that successful metallic biomaterials should have good biocompatibility, high corrosion resistance, and strong wear resistance. In addition, a low Young's modulus similar to human bone is now recognized as another important factor, in order to avoid bone atrophy due to the stress shielding effect. While the Young's modulus of stainless steels and conventional fcc CoCr alloys is as high as 190-240 GPa, for $$beta$$-type Ti-base alloys it is generally in the range of 50-80 GPa. Young's modulus values are as low as 35 GPa for Ti-Nb-Ta-Zr, close to that of human bone at approximately 10-30 GPa. However, Ti-base alloys come with the compromise of low wear resistance. In fact, alloys that feature a low Young's modulus along with high wear resistance have been difficult to realize. This article explores the recently developed bcc CoCr-base alloy Co-Cr-Al-Si as a potential solution to these issues, i.e., the difficulty in combining a low Young's modulus with high wear resistance, and the challenge of realizing large superelastic strains.

論文

Non-Hookean large elastic deformation in bulk crystalline metals

Xu, S.*; 大平 拓実*; 佐藤 駿介*; Xu, X.*; 大森 俊洋*; Harjo, S.; 川崎 卓郎; Seiner, H.*; Zoubkov$'a$, K.*; 村上 恭和*; et al.

Nature Communications (Internet), 13, p.5307_1 - 5307_8, 2022/09

 被引用回数:8 パーセンタイル:66.14(Multidisciplinary Sciences)

Crystalline metals can have large theoretical elastic strain limits. However, a macroscopic block of conventional crystalline metals practically suffers a very limited elastic deformation of $$<$$0.5% with a linear stress-strain relationship obeying Hooke's law. Here, we report on the experimental observation of a large tensile elastic deformation with an elastic strain of $$>$$4.3% in a Cu-based single crystalline alloy at its bulk scale at room temperature. The large macroscopic elastic strain that originates from the reversible lattice strain of a single phase is demonstrated by in situ microstructure and neutron diffraction observations. Furthermore, the elastic reversible deformation, which is nonhysteretic and quasilinear, is associated with a pronounced elastic softening phenomenon. The increase in the stress gives rise to a reduced Young's modulus, unlike the traditional Hooke's law behaviour. The experimental discovery of a non-Hookean large elastic deformation offers the potential for the development of bulk crystalline metals as high-performance mechanical springs or for new applications via "elastic strain engineering."

論文

Flexible and tough superelastic Co-Cr alloys for biomedical applications

大平 拓実*; Xu, S.*; 平田 研二*; Xu, X.*; 大森 俊洋*; 植木 洸輔*; 上田 恭介*; 成島 尚之*; 長迫 実*; Harjo, S.; et al.

Advanced Materials, 34(27), p.2202305_1 - 2202305_11, 2022/07

 被引用回数:12 パーセンタイル:87.73(Chemistry, Multidisciplinary)

The demand for biomaterials has been increasing along with the increase in the population of elderly people worldwide. The mechanical properties and high wear resistance of metallic biomaterials makes them well-suited for use as substitutes or as support for damaged hard tissues. However, unless these biomaterials also have a low Young's modulus similar to that of human bones, bone atrophy inevitably occurs. Because a low Young's modulus is typically associated with poor wear resistance, it is difficult to realize a low Young's modulus and high wear resistance simultaneously. Also, the superelastic property of shape memory alloys makes them suitable for biomedical applications, like vascular stents and guide wires. However, due to the low recoverable strain of conventional biocompatible shape memory alloys, the demand for a new alloy system is high. The novel body-center-cubic cobalt-chromium-based alloys in this paper provide a solution to both of these problems. We believe our novel alloys are promising candidates for biomedical applications.

論文

Transport model comparison studies of intermediate-energy heavy-ion collisions

Walter, H.*; Colonna, M.*; Cozma, D.*; Danielewicz, P.*; Ko, C. M.*; Kumar, R.*; 小野 章*; Tsang, M. Y. B*; Xu, J.*; Zhang, Y.-X.*; et al.

Progress in Particle and Nuclear Physics, 125, p.103962_1 - 103962_90, 2022/07

 被引用回数:48 パーセンタイル:96.94(Physics, Nuclear)

原子核-原子核衝突や原子核の状態方程式の研究において、反応計算モデルは重要なツールとなり、世界中で開発が進んでいる。本論文は、原子力機構のJQMD-2.0を含め、現在開発中の複数のコード開発者の協力により、これらコードを同じ条件で比較することで共通点や差異を明らかにしたプロジェクトTransport Model Evaluation Project (TMEP)を総括したものである。参加したコードはBoltzmann-Uehling-Uhlenbeck(BUU)法に基づく13のコードと、Quantum Molecular Dynamics (QMD)法に基づく12のコードであった。プロジェクトでは、Au原子核同士を衝突させてその終状態を観測する現実的な計算や、一辺が640nmの箱に核子を詰めて時間発展させる仮想的な計算を行った。その結果、BUU法コードとQMD法コードは計算原理が異なるため、計算の設定に関係なく系統的な差異が生じることが明らかになった。その一方で、同じ方法を採用するコード間の比較では、時間発展を細かく計算することでコード間の差は埋まっていき、一定の収束値を持つことが示された。この結果は今後開発される同分野のコードのベンチマークデータとして有用なものであるだけでなく、原子核基礎物理学の実験や理論研究の標準的な指針としても役に立つことが期待される。

論文

A First glimpse at the shell structure beyond $$^{54}$$Ca; Spectroscopy of $$^{55}$$K, $$^{55}$$Ca, and $$^{57}$$Ca

小岩井 拓真*; Wimmer, K.*; Doornenbal, P.*; Obertelli, A.*; Barbieri, C.*; Duguet, T.*; Holt, J. D.*; 宮城 宇志*; Navr$'a$til, P.*; 緒方 一介*; et al.

Physics Letters B, 827, p.136953_1 - 136953_7, 2022/04

 被引用回数:4 パーセンタイル:52.69(Astronomy & Astrophysics)

中性子過剰核$$^{54}$$Caでは、新魔法数34が発見されて以来、その構造を知るために多くの実験がなされてきたが、それを超える中性子過剰核の情報は全く知られてこなかった。本論文では、理化学研究所RIBFにて$$^{55}$$K, $$^{55}$$Ca, $$^{57}$$Caの励起状態から脱励起するガンマ線を初めて観測した結果を報告した。それぞれ1つのガンマ線しか得られなかったものの、$$^{55}$$Kおよび$$^{55}$$Caのデータは、それぞれ、陽子の$$d_{3/2}$$$$s_{1/2}$$軌道間のエネルギー差、中性子の$$p_{1/2}$$$$f_{5/2}$$軌道間のエネルギー差を敏感に反映し、両方とも最新の殻模型計算によって200keV程度の精度で再現できることがわかった。また、1粒子状態の程度を特徴づける分光学的因子を実験データと歪曲波インパルス近似による反応計算から求め、その値も殻模型計算の値と矛盾しないことがわかった。

論文

The $$^{59}$$Fe(n,$$gamma$$)$$^{60}$$Fe cross section from the surrogate ratio method and its effect on the $$^{60}$$Fe nucleosynthesis

Yan, S. Q.*; Li, X. Y.*; 西尾 勝久; Lugaro, M.*; Li, Z. H.*; 牧井 宏之; Pignatari, M.*; Wang, Y. B.*; Orlandi, R.; 廣瀬 健太郎; et al.

Astrophysical Journal, 919(2), p.84_1 - 84_7, 2021/10

 被引用回数:1 パーセンタイル:8.87(Astronomy & Astrophysics)

The long-lived $$^{60}$$Fe (with a half-life of 2.62 Myr) is a crucial diagnostic of active nucleosynthesis in the Milky Way galaxy and in supernovae near the solar system. The neutron-capture reaction $$^{59}$$Fe(n,$$gamma$$)$$^{60}$$Fe on $$^{59}$$Fe (half-life=44.5 days) is the key reaction for the production of $$^{60}$$Fe in massive stars. This reaction cross section has been previously constrained by the Coulomb dissociation experiment, which offered partial constraint on the E1 $$gamma$$-ray strength function but a negligible constraint on the M1 and E2 components. In this work, for the first time, we use the surrogate ratio method to experimentally determine the $$^{59}$$Fe(n,$$gamma$$)$$^{60}$$Fe cross sections in which all the components are included. We derived a Maxwellian-averaged cross section of 27.5$$pm$$3.5 mb at $$kT$$ = 30 keV and 13.4$$pm$$1.7 mb at $$kT$$ = 90 keV, roughly 10%-20% higher than previous estimates. We analyzed the impact of our new reaction rates in nucleosynthesis models of massive stars and found that uncertainties in the production of $$^{60}$$Fe from the $$^{59}$$Fe(n,$$gamma$$)$$^{60}$$Fe rate are at most 25$$%$$. We conclude that stellar physics uncertainties now play a major role in the accurate evaluation of the stellar production of $$^{60}$$Fe.

論文

Investigation of the ground-state spin inversion in the neutron-rich $$^{47,49}$$Cl isotopes

Linh, B. D.*; Corsi, A.*; Gillibert, A.*; Obertelli, A.*; Doornenbal, P.*; Barbieri, C.*; Chen, S.*; Chung, L. X.*; Duguet, T.*; G$'o$mez-Ramos, M.*; et al.

Physical Review C, 104(4), p.044331_1 - 044331_16, 2021/10

AA2021-0468.pdf:1.29MB

 被引用回数:5 パーセンタイル:46.8(Physics, Nuclear)

理化学研究所のRIビームファクトリーにて中性子過剰$$^{47,49}$$Clの励起状態を$$^{50}$$Arからのノックアウト反応によって生成し、脱励起ガンマ線からそのエネルギー準位を測定した。また、陽子ノックアウトの運動量分布から$$^{49}$$Clの基底状態が$$3/2^+$$であることがわかった。その結果を大規模殻模型計算およびいくつかの第一原理計算と比較した。$$^{47,49}$$Cl同位体の基底状態および第一励起状態は、計算で用いた相互作用に敏感であることがわかった。それは、陽子の一粒子エネルギーと四重極集団運動との複雑な結合によるためであると考えられる。

論文

Pairing forces govern population of doubly magic $$^{54}$$Ca from direct reactions

Browne, F.*; Chen, S.*; Doornenbal, P.*; Obertelli, A.*; 緒方 一介*; 宇都野 穣; 吉田 数貴; Achouri, N. L.*; 馬場 秀忠*; Calvet, D.*; et al.

Physical Review Letters, 126(25), p.252501_1 - 252501_7, 2021/06

 被引用回数:10 パーセンタイル:69.3(Physics, Multidisciplinary)

理化学研究所RIビームファクトリーにて、中性子過剰核$$^{55}$$Scからの1陽子ノックアウト反応によって$$^{54}$$Caを生成し、そのエネルギー準位と反応断面積をガンマ線分光および不変質量分光によって得た。その結果を歪曲波インパルス近似による核反応計算と大規模殻模型による核構造計算を組み合わせた理論値と比較した。実験の準位と断面積は理論計算によってよく再現された。$$^{54}$$Caの正パリティ状態については、基底状態の生成断面積が励起状態のものに比べて圧倒的に大きいという結果が得られた。これは、$$^{55}$$Scでは中性子魔法数34が消滅し$$^{54}$$Caではその魔法数が存在するというこれまでの知見と一見矛盾するが、対相関による分光学的因子のコヒーレンスから理解することができる。

94 件中 1件目~20件目を表示