検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 92 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

Modeling of hardness and welding residual stress in Type 316 stainless steel components for the assessment of stress corrosion cracking

Li, S.; 山口 義仁; 勝山 仁哉; Li, Y.; Deng, D.*

Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 7 Pages, 2023/07

In this work, a framework was proposed on the comprehensive assessment of hardness and welding residual stress in Type 316 austenitic stainless steel welded joints. Firstly, an 8-pass butt-welded joint made of Type 316 stainless steel was fabricated. Finite element analysis of the welded joint was performed to investigate hardness and welding residual stress distributions. The grain growth model was developed for the hardness prediction. The Chaboche combined isotropic-kinematic strain hardening model and time-temperature dependent annealing model were adopted. The relationships between the Vickers hardness and the uniaxial plastic strain as well as grain size were collected from published literatures. The simulation results of the grain size and accumulated equivalent plastic strain were used for the hardness prediction of the welded joint. The predicted hardness was compared with the experimental data of hardness mapping. The distribution of welding residual stress on the outer surface of the welded pipe was measured by using the X-ray diffraction method and strain gauge method, respectively. The predicted welding residual stresses were compared with the measurements. The results obtained showed that the developed numerical approach can predict the hardness and welding residual stress of Type 316 stainless steel welded joints with satisfactory accuracy. The effects of structural constraint and heat input on the hardness and welding residual stress will be investigated as further works, as described in the proposed framework.

論文

Development of stress intensity factor solution for surface crack at nozzle corner in reactor pressure vessel

山口 義仁; 高見澤 悠; 勝山 仁哉; Li, Y.

Proceedings of ASME 2023 Pressure Vessels and Piping Conference (PVP 2023) (Internet), 9 Pages, 2023/07

原子炉圧力容器のノズル部の健全性評価において、ノズルコーナー亀裂に対する応力拡大係数が重要なパラメータである。これまで、ノズルコーナーの表面亀裂に対する様々な応力拡大係数解が提案されてきたが、その多くは亀裂の最深点にのみ着目しており、ノズルコーナーの形状寸法に関する情報は明らかになっていない。ノズルコーナー亀裂を対象とした既往の疲労試験結果によると、亀裂表面点における進展量は、最深点よりも大きいことが明らかとなっている。このことから、亀裂表面点の応力拡大係数は最深点よりも高い可能性がある。これらより、本研究では、健全性評価の信頼性を高めるため、有限要素解析を通じて、ノズルコーナーの形状寸法とき裂サイズに対応した、表面点と最深点の両方の応力拡大係数解を提案する。

論文

Empirical correction factor to estimate the plastic collapse bending moment of pipes with circumferential surface flaw

Lacroix, V.*; 長谷川 邦夫; Li, Y.; 山口 義仁

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 7 Pages, 2022/07

The structural integrity assessment of pipes with circumferential surface flaw under the plastic collapse regime consists of net section collapse analysis. In recent years various researchers showed that this analysis, which has been developed based on classic beam theory, suffers from certain inaccuracies. As such, assessment purely based on net-section collapse and beam theory can reveal both conservative and unconservative results. To address those inaccuracies, in this paper authors introduced a correction factor which aims to mitigate the difference between the ASME B&PV Code Section XI equations and the experimental results. This correction factor is calculated using an empirical formula developed on the basis of a large experimental database of pipe collapse bending tests containing variety of diameter, thickness, flaw depth and flaw length values. Within this work, authors took a systematic approach to identify the most influencing factors on such a correction factor and showed that by applying this correction factor to the current solution of ASME B&PV Code Section XI, this solution becomes more accurate. This corrected approach also is in line with ASME B&PV Code Section XI Appendix C practice for axial flaw in pipes, where a semi-empirical correction factor has been considered as well.

論文

Failure bending stresses for small diameter thick-wall pipes

山口 義仁; 長谷川 邦夫; Li, Y.; Lacroix, V.*

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 4 Pages, 2022/07

Four-point bending tests without internal pressure were performed for Type 304 stainless steel pipes with circumferential flaws at room temperature. The specimens are 1-inch diameter (33.7 mm) Schedule 160 pipes (6.3 mm wall thickness). The flaws were part-through flaws located at the pipe external side. The flaw angles are from 120$$^{circ}$$ to 240$$^{circ}$$, and the flaw depths are two cases of 50% and 75% of the wall thickness. Plastic collapse stresses obtained from experiments were compared with those calculated using Limit Load Criteria from Appendix C of the American Society of Mechanical Engineers Code Section XI. Limit Load Criteria were developed using flow stress at flawed section of the pipe. The plastic collapse stress test results were larger than those of the calculation results. For flaws with flaw depths less than 50% of the wall thickness, the experimental stresses were significantly large. The Limit Load Criteria given by Section XI provide conservative collapse stresses and could be improved.

論文

Development of probabilistic analysis code for evaluating seismic fragility of aged pipes with wall-thinning

山口 義仁; 西田 明美; Li, Y.

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 7 Pages, 2022/07

原子力発電所おける配管減肉は重要な経年劣化事象の一つである。また近年、日本のいくつかの原子力発電所は大きな地震を経験している。そのため、長期間運転した原子力発電所を対象とした地震を起因とした確率論的リスク評価において、減肉と地震による応答応力の両方を考慮した配管系の地震フラジリティ評価が、重要となっている。本研究では、原子力機構が開発した減肉配管を対象とした破損確率解析コードPASCAL-ECに、減肉配管の地震応答応力の算出モデルや減肉配管の破壊評価法など、減肉配管の地震フラジリティを評価可能とする機能を導入した。また、整備した解析コードを用いて、地震フラジリティの評価事例を整備した。

論文

Failure estimation methods for steam generator tubes with wall-thinning or crack

山口 義仁; 真野 晃宏; Li, Y.

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 10 Pages, 2022/07

蒸気発生器(SG)伝熱管は、加圧水型原子炉の重要な機器の一つである。SG伝熱管では、減肉や応力腐食割れなどの検出が報告されている。SG伝熱管の構造健全性を評価するためには、一次冷却系からの内圧と二次冷却系からの外圧の両方を考慮して破裂による破壊を評価する必要がある。そこで、様々な機関においてSG伝熱管を対象とした破裂試験が実施され、それに基づき破壊評価法が提案されている。本研究では、減肉又は亀裂を有するSG伝熱管を対象に、既存の破裂試験データを調査し、それを踏まえて、亀裂又は局所的な減肉を有するSG伝熱管に適した破壊評価法を新たに提案した。また、これらの破壊評価法の適用性を、予測結果と実機SG伝熱管の破裂試験データを比較することにより確認した。

論文

Damage evaluations for BWR lower head in severe accident based on multi-physics simulations

勝山 仁哉; 山口 義仁; 根本 義之; 古田 琢哉; 加治 芳行

Proceedings of ASME 2022 Pressure Vessels and Piping Conference (PVP 2022) (Internet), 9 Pages, 2022/07

To assess rupture behavior of the lower head of reactor pressure vessel in boiling-water-type nuclear power plants due to severe accident like Fukushima Daiichi, we have been developing an analysis method based on coupled analysis of three-dimensional multi-physics simulations composed of radiation transport, thermal-hydraulics (TH) and thermal-elastic-plastic-creep analyses. In this simulation, Monte Carlo radiation transport calculation is firstly performed by using PHITS code to compute proton dose distribution considering molten conditions of core materials. Then the deposit energies at each location is imported into TH analysis code ANSYS Fluent with the same geometry and temperature distribution is simulated by thermal-fluid dynamics. Finally, temperature distribution obtained from TH analysis is applied to thermal-elastic-plastic-creep analyses using FINAS-STAR and then damage evaluation is carried out based on several criterions such as Kachanov, Larson-Miller-parameter, melting point. To conduct such analyses, we also have continued to obtain experimental data on creep deformation in high temperature range. In this study, to predict time and location of reactor pressure vessel (RPV) lower head rupture of boiling water reactors (BWRs) considering creep damage mechanisms, we performed creep damage evaluations based on developing analysis method by using detailed three-dimensional model of RPV lower head with control rod guide tubes, stub tubes and welds. From the detailed analysis results, it was concluded that failure regions of BWR lower head are only the control rod guide tubes or stub tubes under simulated conditions.

論文

Improvement of probabilistic fracture mechanics analysis code PASCAL-SP regarding stress corrosion cracking in nickel based alloy weld joint of piping system in boiling water reactor

真野 晃宏; 山口 義仁; 勝山 仁哉; Li, Y.

Journal of Pressure Vessel Technology, 144(1), p.011506_1 - 011506_9, 2022/02

 被引用回数:1 パーセンタイル:22.02(Engineering, Mechanical)

これまで、沸騰水型原子炉(BWR)配管系のニッケル合金異材溶接継手において応力腐食割れ(SCC)による亀裂の存在が報告されており、そのような溶接継手に対する構造健全性評価が重要となっている。現在、影響因子の固有の不確実さを確率分布として考慮することで亀裂を有する機器の破損確率を定量的に評価できる確率論的破壊力学(PFM)評価手法が、より合理的な構造健全性評価手法として注目されており、原子力機構では、溶接継手を含む原子炉配管系を対象としたPFM解析コードPASCAL-SPの開発を進めている。本研究では、PASCAL-SPにBWRのニッケル合金異材溶接継手を対象とした解析機能を新たに導入した。また、改良したPASCAL-SPを用いて、異材溶接継手を対象に、漏えいの検知及び供用期間中検査が破損確率に及ぼす影響に関する感度解析を実施した。解析結果より、改良したPASCAL-SPは、異材溶接継手の破損確率を求め、供用期間中検査等の効果を定量的に評価できることから、構造健全性評価に有用であると結論付けた。

論文

A Novel method to uniquely determine the parameters in Gurson-Tvergaard-Needleman model

Zhang, T.; Lu, K.; 真野 晃宏; 山口 義仁; 勝山 仁哉; Li, Y.

Fatigue & Fracture of Engineering Materials & Structures, 44(12), p.3399 - 3415, 2021/12

 被引用回数:8 パーセンタイル:82.96(Engineering, Mechanical)

GTNモデルは、延性金属の微細組織の力学挙動を考慮するモデルであるとともに、式が明確な物理的意味を表すことから、延性金属の破壊予測のためのアプローチとして期待されている。一方、強い相関のある8つのモデルパラメータの決定が困難なため、工学的な応用はほとんど進んでいない。本研究では、GTNモデルの物理的背景に基づいて、GTNモデルのパラメータを決定するための一連の手法を提案した。具体的には、連続体損傷力学の考え方を活用し、一軸引張試験における有効ヤング率の変化からボイドの体積分率の増加を実験的に求めることで、ボイドの生成に関する3つのパラメータの値を決定した。その他のGTNモデルのパラメータに関しては、化学組成分析、ボイドが含まれる単位セルモデルを用いた解析及び有限要素逆解析により一意に決定した。また、これらのパラメータ決定手法の妥当性を、炭素鋼STPT410の亀裂付き試験片と亀裂のない試験片の両方の破壊試験の結果と決定したパラメータを用いた数値解析結果との比較を通じて確認した。

論文

長期間使用された原子炉配管の耐震安全性評価手法の開発

山口 義仁; Li, Y.

配管技術, 63(12), p.22 - 27, 2021/10

東京電力福島第一原子力発電所の事故の教訓を踏まえ、原子力発電所に対する地震を起因とした確率論的リスク評価(PRA: Probabilistic Risk Assessment)やリスク情報の活用が重要となっている。地震PRAでは、安全上重要な機器や配管などの地震による損傷確率を考慮して、炉心損傷頻度などが求められる。長期間使用された配管では、経年劣化による亀裂などの発生があり得る。亀裂が発生すれば、配管の破壊強度が低減され、地震時の損傷確率が上昇することとなる。そのため、長期間運転された原子炉を対象に地震PRAを実施する際には、経年劣化が機器の損傷確率に及ぼす影響を考慮することが重要である。著者らは、経年劣化の影響に加えて、地震による亀裂進展や破壊を考慮することで、長期間使用された原子炉配管の損傷確率を算出できる解析コードを開発し、妥当性の確認を経て公開した。また、地震による損傷確率を求めるための手順や推奨される手法やモデル,技術的根拠などを取りまとめた評価要領を世界に先駆けて整備し公開した。本論文では、開発した解析コード及び評価要領について説明する。

論文

Development of guideline on seismic fragility evaluation for aged piping

山口 義仁; 勝山 仁哉; 眞崎 浩一*; Li, Y.

Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 9 Pages, 2021/07

地震を起因とした確率論的リスク評価は、原子力発電所の耐震安全性を評価するための重要な手法の一つである。この評価では、地震ハザード,地震フラジリティ及び事故シーケンス評価から炉心損傷頻度が求められる。地震フラジリティ評価に着目すると、亀裂や減肉が発生している経年配管に対する評価には、確率論的破壊力学を適用した評価手法が有効であると考えられる。本研究では、長期間運転した原子力発電所を対象とした確率論的リスク評価手法の高度化を目的に、経年劣化事象を考慮した原子力発電所の代表的な配管系を対象とした地震フラジリティ評価に関する評価要領を整備した。本論文では、評価要領の概要と、評価要領に基づき確率論的破壊力学解析コードを用いた地震フラジリティ評価事例を紹介する。

論文

Pilot study on seismic fragility evaluation for degraded austenitic stainless steel piping using the probabilistic fracture mechanics code PASCAL-SP

東 喜三郎*; 山口 義仁; Li, Y.

Proceedings of ASME 2021 Pressure Vessels and Piping Conference (PVP 2021) (Internet), 7 Pages, 2021/07

Seismic probabilistic risk assessment is a standard methodology to quantify the risk of earthquakes including beyond-design-basis levels. The quality of fragility analysis is one of the major factors that affect the results of seismic probabilistic risk assessments. A previous study revealed that component degradation could affect seismic fragility. In practice, inspection and maintenance programs are implemented to control an undesirable effect of the degradation such as stress corrosion cracking. However, the relation between seismic fragility of degraded component and inspection, maintenance, and mitigation models has not been thoroughly discussed so far. This study discussed the effect of inspection and maintenance on seismic fragility of austenitic stainless steel piping susceptible to stress corrosion cracking. Failure probability was calculated by using a probabilistic fracture mechanics code. The results indicated that the adverse effects of stress corrosion cracking on failure probability could be controlled at a relatively low level if inspection, maintenance, and mitigation measures were implemented properly.

報告書

経年配管を対象とした地震フラジリティ評価要領(受託研究)

山口 義仁; 勝山 仁哉; 眞崎 浩一*; Li, Y.

JAEA-Research 2020-017, 80 Pages, 2021/02

JAEA-Research-2020-017.pdf:3.5MB

国内では、安全性向上評価に関する運用ガイドが施行されている。原子力発電所の地震に対する安全性を評価する手法の一つとして、地震を起因とした確率論的リスク評価(地震PRA)がある。この評価では、地震動の作用に対して建屋や機器が損傷する確率である地震フラジリティ、任意の地震動強さとその強さを超過する頻度との関係である地震ハザード及び事故シーケンスから炉心損傷頻度等が求められる。日本原子力学会が定める地震PRAに関する実施基準では、原子力発電所の長期運転により経年劣化事象を無視できない場合、経年劣化事象による地震応答特性の変化又は耐力の低下を考慮して機器等の地震フラジリティを評価することとなっている。この評価において、原子力発電所の長期運転による亀裂又は配管減肉の発生及び進展が確認されている経年配管を対象とする場合は、確率論的破壊力学(PFM)は有力な評価技術である。長期運転された原子力発電所を対象に地震PRAの高度化を図るために、ここで代表的な配管や部位等を対象に、経年劣化事象を考慮した地震フラジリティ評価のための要領を取りまとめた。本評価要領の目的は、破壊力学等の知見を有する地震フラジリティ評価担当者が、本評価要領を参照しながら、別途公開する亀裂を有する経年配管を対象とした地震フラジリティ評価が可能なPFM解析コードPASCAL-SP及び配管減肉を有する経年配管を対象とした地震フラジリティ評価が可能な確率論的解析コードPASCAL-ECを用いることによって、経年配管に対する地震フラジリティ評価を実施できることである。

報告書

原子炉配管に対する確率論的破壊力学解析コードPASCAL-SP2の使用手引き及び解析手法(受託研究)

山口 義仁; 真野 晃宏; 勝山 仁哉; 眞崎 浩一*; 宮本 裕平*; Li, Y.

JAEA-Data/Code 2020-021, 176 Pages, 2021/02

JAEA-Data-Code-2020-021.pdf:5.26MB

日本原子力研究開発機構では、軽水炉機器の構造健全性評価及び耐震安全性評価に関する研究の一環として、原子炉配管を対象とした確率論的破壊力学(PFM: Probabilistic Fracture Mechanics)解析コードPASCAL-SP(PFM Analysis of Structural Components in Aging LWR - Stress Corrosion Cracking at Welded Joints of Piping)の開発を進めてきた。初版は2010年に公開され、その後もより実用性の高いPFM解析の実現を目的として、最新知見を踏まえて解析対象の拡充や解析手法の高度化等を実施してきた。今般、その成果を反映し、バージョン2.0として公開することとした。最新版では、解析対象の経年劣化事象として、ニッケル合金の加圧水型原子炉一次系水質環境中の応力腐食割れ、ニッケル合金の沸騰水型原子炉環境中の応力腐食割れ、二相ステンレス鋼における熱時効等を新たに加えたほか、最新の応力拡大係数解の導入や溶接残留応力の不確実さ等の評価機能の高度化を行い、より適用範囲が広く信頼性が高い配管の破損確率評価を可能とした。また、経年配管の耐震安全性評価の高度化に資することを目的に、巨大地震を想定した大きな地震応答応力に対応した亀裂進展量評価手法等を導入し、地震フラジリティ評価を可能とした。さらに、確率論的評価に係る影響因子の不確実さを認識論的不確実さと偶然的不確実さに分類し、これらの不確実さを考慮して配管の破損確率の信頼度を評価する機能及びモジュールを新たに整備した。本報告書は、バージョン2.0としてPASCAL-SP2の使用方法及び解析手法をまとめたものである。

論文

Non-invasive imaging of radiocesium dynamics in a living animal using a positron-emitting $$^{127}$$Cs tracer

鈴井 伸郎*; 柴田 卓弥; 尹 永根*; 船木 善仁*; 栗田 圭輔; 保科 宏行*; 山口 充孝*; 藤巻 秀*; 瀬古 典明*; 渡部 浩司*; et al.

Scientific Reports (Internet), 10, p.16155_1 - 16155_9, 2020/10

 被引用回数:2 パーセンタイル:24.76(Multidisciplinary Sciences)

Visualizing the dynamics of cesium (Cs) is desirable to understand the impact of radiocesium when accidentally ingested or inhaled by humans. The positron-emitting nuclide $$^{127}$$Cs was produced using the $$^{127}$$I ($$alpha$$, 4n) $$^{127}$$Cs reaction, which was induced by irradiation of sodium iodide with a $$^{4}$$He$$^{2+}$$ beam from a cyclotron. We excluded sodium ions by using a material that specifically adsorbs Cs as a purification column and successfully eluted $$^{127}$$Cs by flowing a solution of ammonium sulfate into the column. We injected the purified $$^{127}$$Cs tracer solution into living rats and the dynamics of Cs were visualized using positron emission tomography; the distributional images showed the same tendency as the results of previous studies using disruptive methods. Thus, this method is useful for the non-invasive investigation of radiocesium in a living animal.

論文

Fatigue crack growth for ferritic steel under negative stress ratio

山口 義仁; 長谷川 邦夫; Li, Y.

Journal of Pressure Vessel Technology, 142(4), p.041507_1 - 041507_6, 2020/08

 被引用回数:0 パーセンタイル:0(Engineering, Mechanical)

疲労亀裂進展中における亀裂の開閉口は、亀裂進展速度の評価において重要な現象である。ASME Code Section XIのAppendix A-4300は、負の応力比におけるフェライト鋼の疲労亀裂進展速度を算出する式について、負荷の大きさに応じて二つ提示している。一つは、負荷が小さい場合に、亀裂の閉口を考慮する式である。もう一つは、負荷が大きい場合に、亀裂の閉口を考慮しない式である。本研究では、フェライト鋼に対して、負荷の大きさを徐々に変えながら疲労亀裂進展試験を実施し、負荷の大きさが亀裂閉口に及ぼす影響を調査した。その結果、Appendix A-4300における疲労亀裂進展速度算出式を切り替える負荷の大きさと比較して、より小さい負荷で亀裂が閉口することを明らかにした。

論文

Expansion of high temperature creep test data for failure evaluation of BWR lower head in severe accident

山口 義仁; 勝山 仁哉; 加治 芳行; 逢坂 正彦; Li, Y.

Mechanical Engineering Journal (Internet), 7(3), p.19-00560_1 - 19-00560_12, 2020/06

福島第一原子力発電所の事故の後、原子力機構では、廃止措置等に資するため、圧力容器下部ヘッドの貫通部、スタブ管、溶接部等を含む詳細な3次元有限要素解析モデルを用いてクリープ損傷メカニズムに基づき破損時間や場所を予測する手法の開発を進めている。また、その解析に必要な、既存のデータベースや文献にない融点近傍の高温域における引張特性やクリープ特性の取得も進めている。本研究では、圧力容器下部ヘッドを構成する低合金鋼,ニッケル合金及びオーステナイト系ステンレス鋼に対する単軸引張及びクリープ試験を実施し、既存の材料特性データベースを拡張した。特に、高温かつ長時間のクリープ特性データを非接触型伸び測定機能を有する引張試験機を用いて取得した。また、拡張されたデータベースに基づき、クリープ構成則のパラメータを求め、重大事故時における破損評価の精度向上を図った。

論文

Neutron emission spectrum from gold excited with 16.6 MeV linearly polarized monoenergetic photons

桐原 陽一; 中島 宏; 佐波 俊哉*; 波戸 芳仁*; 糸賀 俊朗*; 宮本 修治*; 武元 亮頼*; 山口 将志*; 浅野 芳裕*

Journal of Nuclear Science and Technology, 57(4), p.444 - 456, 2020/04

 被引用回数:4 パーセンタイル:62.49(Nuclear Science & Technology)

兵庫県立大学ニュースバル放射光施設ビームラインBL01において、$$16.6pm0.2$$MeVの単色直線偏光光子ビームを$$^{197}$$Auへ照射したときの中性子放出スペクトルを、飛行時間法により測定した。これより光核反応によって生成される2成分の中性子スペクトルを測定した。このうちの1つ成分(A)は、4MeVまでのエネルギーであり蒸発に類似したスペクトル形状を示した。もう一方の成分(B)は、4MeV以上のエネルギーでありバンプに類似したスペクトル形状を示した。中性子の放出強度において、成分(A)は角度依存は見られなかったが、成分(B)は偏光と検出器方向を成す角度$$Theta$$の関数として、$$a+bcos(2Theta)$$の関係を示すことがわかった。

論文

Crack growth evaluation for cracked stainless and carbon steel pipes under large seismic cyclic loading

山口 義仁; 勝山 仁哉; Li, Y.; 鬼沢 邦雄

Journal of Pressure Vessel Technology, 142(2), p.021906_1 - 021906_11, 2020/04

 被引用回数:1 パーセンタイル:8.25(Engineering, Mechanical)

Some Japanese nuclear power plants have experienced several large earthquakes beyond the design basis ground motion. In addition, cracks resulting from long-term operation have been detected in piping systems. Therefore, to assess the structure integrity of cracked pipes taking the occurrence of large earthquakes into account, it is very important to establish a crack growth evaluation method for cracked pipes that are subjected to large seismic cyclic response loading. In our previous study, we proposed an evaluation method for crack growth during large earthquakes through experimental study using small specimens and investigation using finite element analyses. In the present study, to confirm applicability of the proposed method, crack growth tests were conducted on both stainless and carbon steel pipe specimens with a circumferential through-wall crack, considering large seismic cyclic response loading with complex wave forms. The predicted crack growth values are in good agreement with the experimental results and the applicability of the proposed method was confirmed.

論文

A New probabilistic evaluation model for weld residual stress

真野 晃宏; 勝山 仁哉; 宮本 裕平*; 山口 義仁; Li, Y.

International Journal of Pressure Vessels and Piping, 179, p.103945_1 - 103945_6, 2020/01

 被引用回数:1 パーセンタイル:12.66(Engineering, Multidisciplinary)

溶接残留応力(WRS)は、確率論的破壊力学(PFM)に基づく亀裂を有する配管溶接部の破損確率評価において最も重要な影響因子の一つであるとともに、大きな不確実さを有する。既存のPFM解析コードにおけるWRSの確率論的評価モデルでは、有限要素解析から得られる板厚内の複数の離散点におけるWRS値の不確実さが考慮されるが、板厚方向のWRSの分布形状が考慮されないため、板厚内におけるWRS値の相関関係や力のつり合いに関する複雑でユーザー依存の追加処理を行う必要がある。本研究では、より合理的なWRSの確率論的評価モデルとして、有限要素解析に基づくWRS解析結果をフーリエ余弦級数で表現し、WRS分布の不確実さをフーリエ余弦級数の係数の確率分布を用いて表現する確率論的評価モデルを提案した。フーリエ余弦級数の係数は、板厚内の特定位置におけるWRS値の大きさと板厚方向におけるWRSの分布形状の両方を同時に考慮して決定されるため、板厚内におけるWRS値の相関関係や力のつり合いが考慮されている。提案したWRS評価モデルは、解析コードのユーザー依存性がなく、簡単かつ合理的にWRSの不確実さを考慮できるため、PFM解析において有用であると結論した。

92 件中 1件目~20件目を表示